mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 00:21:06 +00:00
3f719069c8
This patch adds new CONFIG_NAND_OMAP_ECCSCHEME, replacing other distributed
CONFIG_xx used for selecting NAND ecc-schemes.
This patch aims at solving following issues.
1) Currently ecc-scheme is tied to SoC platform, which prevents user to select
other ecc-schemes also supported in hardware. like;
- most of OMAP3 SoC platforms use only 1-bit Hamming ecc-scheme, inspite
the fact that they can use higher ecc-schemes like 8-bit ecc-schemes with
software based error detection (OMAP_ECC_BCH4_CODE_HW_DETECTION_SW).
- most of AM33xx SoC plaforms use 8-bit BCH ecc-scheme for now, but hardware
supports BCH16 ecc-scheme also.
2) Different platforms use different CONFIG_xx to select ecc-schemes, which
adds confusion for user while migrating platforms.
- *CONFIG_NAND_OMAP_ELM* which enables ELM hardware engine, selects only
8-bit BCH ecc-scheme with h/w based error-correction (OMAP_ECC_BCH8_CODE_HW)
whereas ELM hardware engine supports other ecc-schemes also like; BCH4,
and BCH16 (in future).
- *CONFIG_NAND_OMAP_BCH8* selects 8-bit BCH ecc-scheme with s/w based error
correction (OMAP_ECC_BCH8_CODE_HW_DETECTION_SW).
- *CONFIG_SPL_NAND_SOFTECC* selects 1-bit Hamming ecc-scheme using s/w library
Thus adding new *CONFIG_NAND_OMAP_ECCSCHEME* de-couples ecc-scheme dependency
on SoC platform and NAND driver. And user can select ecc-scheme independently
foreach board.
However, selection some hardware based ecc-schemes (OMAP_ECC_BCHx_CODE_HW) still
depends on presence of ELM hardware engine on SoC. (Refer doc/README.nand)
Signed-off-by: Pekon Gupta <pekon@ti.com>
161 lines
4.7 KiB
C
161 lines
4.7 KiB
C
/*
|
|
* Configuration settings for the TI OMAP3 EVM board.
|
|
*
|
|
* Copyright (C) 2006-2011 Texas Instruments Incorporated - http://www.ti.com/
|
|
*
|
|
* Author :
|
|
* Manikandan Pillai <mani.pillai@ti.com>
|
|
* Derived from Beagle Board and 3430 SDP code by
|
|
* Richard Woodruff <r-woodruff2@ti.com>
|
|
* Syed Mohammed Khasim <khasim@ti.com>
|
|
*
|
|
* Manikandan Pillai <mani.pillai@ti.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __OMAP3EVM_CONFIG_H
|
|
#define __OMAP3EVM_CONFIG_H
|
|
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/omap3.h>
|
|
|
|
/* ----------------------------------------------------------------------------
|
|
* Supported U-boot commands
|
|
* ----------------------------------------------------------------------------
|
|
*/
|
|
#include <config_cmd_default.h>
|
|
|
|
#define CONFIG_CMD_ASKENV
|
|
|
|
#define CONFIG_CMD_EXT2
|
|
#define CONFIG_CMD_FAT
|
|
#define CONFIG_CMD_JFFS2
|
|
|
|
#define CONFIG_CMD_I2C
|
|
#define CONFIG_CMD_MMC
|
|
#define CONFIG_CMD_NAND
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_PING
|
|
|
|
#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
|
|
#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
|
|
#undef CONFIG_CMD_IMI /* iminfo */
|
|
#undef CONFIG_CMD_IMLS /* List all found images */
|
|
|
|
/* ----------------------------------------------------------------------------
|
|
* Supported U-boot features
|
|
* ----------------------------------------------------------------------------
|
|
*/
|
|
#define CONFIG_SYS_LONGHELP
|
|
#define CONFIG_SYS_HUSH_PARSER
|
|
|
|
/* Display CPU and Board information */
|
|
#define CONFIG_DISPLAY_CPUINFO
|
|
#define CONFIG_DISPLAY_BOARDINFO
|
|
|
|
/* Allow to overwrite serial and ethaddr */
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
/* Add auto-completion support */
|
|
#define CONFIG_AUTO_COMPLETE
|
|
|
|
/* ----------------------------------------------------------------------------
|
|
* Supported hardware
|
|
* ----------------------------------------------------------------------------
|
|
*/
|
|
|
|
/* MMC */
|
|
#define CONFIG_MMC
|
|
#define CONFIG_GENERIC_MMC
|
|
#define CONFIG_OMAP_HSMMC
|
|
|
|
/* SPL */
|
|
#define CONFIG_SPL_MMC_SUPPORT
|
|
#define CONFIG_SPL_FAT_SUPPORT
|
|
#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
|
|
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
|
|
#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
|
|
#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
|
|
|
|
/* Partition tables */
|
|
#define CONFIG_EFI_PARTITION
|
|
#define CONFIG_DOS_PARTITION
|
|
|
|
/* USB
|
|
*
|
|
* Enable CONFIG_MUSB_HCD for Host functionalities MSC, keyboard
|
|
* Enable CONFIG_MUSB_UDD for Device functionalities.
|
|
*/
|
|
#define CONFIG_USB_OMAP3
|
|
#define CONFIG_MUSB_HCD
|
|
/* #define CONFIG_MUSB_UDC */
|
|
|
|
/* NAND SPL */
|
|
#define CONFIG_SPL_NAND_SIMPLE
|
|
#define CONFIG_SPL_NAND_SUPPORT
|
|
#define CONFIG_SPL_NAND_BASE
|
|
#define CONFIG_SPL_NAND_DRIVERS
|
|
#define CONFIG_SPL_NAND_ECC
|
|
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
|
|
#define CONFIG_SYS_NAND_PAGE_COUNT 64
|
|
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
|
|
#define CONFIG_SYS_NAND_OOBSIZE 64
|
|
#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
|
|
#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
|
|
#define CONFIG_SYS_NAND_ECCPOS {2, 3, 4, 5, 6, 7, 8, 9,\
|
|
10, 11, 12, 13}
|
|
#define CONFIG_SYS_NAND_ECCSIZE 512
|
|
#define CONFIG_SYS_NAND_ECCBYTES 3
|
|
#define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_HW
|
|
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
|
|
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* Include common board configuration
|
|
* -----------------------------------------------------------------------------
|
|
*/
|
|
#include "omap3_evm_common.h"
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* Default environment
|
|
* -----------------------------------------------------------------------------
|
|
*/
|
|
#define CONFIG_BOOTDELAY 3
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"loadaddr=0x82000000\0" \
|
|
"usbtty=cdc_acm\0" \
|
|
"mmcdev=0\0" \
|
|
"console=ttyO0,115200n8\0" \
|
|
"mmcargs=setenv bootargs console=${console} " \
|
|
"root=/dev/mmcblk0p2 rw " \
|
|
"rootfstype=ext3 rootwait\0" \
|
|
"nandargs=setenv bootargs console=${console} " \
|
|
"root=/dev/mtdblock4 rw " \
|
|
"rootfstype=jffs2\0" \
|
|
"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
|
|
"bootscript=echo Running bootscript from mmc ...; " \
|
|
"source ${loadaddr}\0" \
|
|
"loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
|
|
"mmcboot=echo Booting from mmc ...; " \
|
|
"run mmcargs; " \
|
|
"bootm ${loadaddr}\0" \
|
|
"nandboot=echo Booting from nand ...; " \
|
|
"run nandargs; " \
|
|
"onenand read ${loadaddr} 280000 400000; " \
|
|
"bootm ${loadaddr}\0" \
|
|
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"mmc dev ${mmcdev}; if mmc rescan; then " \
|
|
"if run loadbootscript; then " \
|
|
"run bootscript; " \
|
|
"else " \
|
|
"if run loaduimage; then " \
|
|
"run mmcboot; " \
|
|
"else run nandboot; " \
|
|
"fi; " \
|
|
"fi; " \
|
|
"else run nandboot; fi"
|
|
|
|
#endif /* __OMAP3EVM_CONFIG_H */
|