u-boot/board/novtech/meerkat96
Shawn Guo 6802d7951c Add i.MX7D based Meerkat96 board support
The Meerkat96 board, based on the NXP i.MX7D SoC, is a member of
96Boards community and complies with all Consumer Edition board
specifications.

https://www.novtech.com/products/meerkat96.html
https://www.96boards.org/product/imx7-96/

The initial supported/tested devices include:
 - Debug serial
 - SD
 - USB Host (with Ethernet)

With these support, it's good enough for loading Linux Kernel from SD or
Ethernet over USB.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2019-10-13 22:49:11 +02:00
..
imximage.cfg Add i.MX7D based Meerkat96 board support 2019-10-13 22:49:11 +02:00
Kconfig Add i.MX7D based Meerkat96 board support 2019-10-13 22:49:11 +02:00
MAINTAINERS Add i.MX7D based Meerkat96 board support 2019-10-13 22:49:11 +02:00
Makefile Add i.MX7D based Meerkat96 board support 2019-10-13 22:49:11 +02:00
meerkat96.c Add i.MX7D based Meerkat96 board support 2019-10-13 22:49:11 +02:00
README Add i.MX7D based Meerkat96 board support 2019-10-13 22:49:11 +02:00

* Build U-Boot for Meerkat96 board

  $ make mrproper
  $ make meerkat96_defconfig
  $ make

  It will generate the U-Boot binary called u-boot-dtb.imx

* Install U-Boot to MicroSD card

  Plug MicroSD card to a Linux machine (with card reader), find the
  device name and replace sd[x] with the name in the following command.

  $ sudo dd if=u-boot-dtb.imx of=/dev/sd[x] bs=512 seek=2

  It will install U-Boot to MicroSD card at 1KiB offset.  Insert the
  card to Meerkat96 MicroSD slot, power up the board, and U-Boot should
  boot from the card.