u-boot/board/novtech/meerkat96
Simon Glass 401d1c4f5d common: Drop asm/global_data.h from common header
Move this out of the common header and include it only where needed.  In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly.   Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-02 15:33:42 -05:00
..
imximage.cfg arm: imx: Finish migration from CONFIG_SECURE_BOOT to CONFIG_IMX_HAB 2020-06-26 10:29:06 -04:00
Kconfig Add i.MX7D based Meerkat96 board support 2019-10-13 22:49:11 +02:00
MAINTAINERS meerkat96: fix typo in MAINTAINERS email address 2020-01-25 12:04:36 -05:00
Makefile Add i.MX7D based Meerkat96 board support 2019-10-13 22:49:11 +02:00
meerkat96.c common: Drop asm/global_data.h from common header 2021-02-02 15:33:42 -05:00
README Add i.MX7D based Meerkat96 board support 2019-10-13 22:49:11 +02:00

* Build U-Boot for Meerkat96 board

  $ make mrproper
  $ make meerkat96_defconfig
  $ make

  It will generate the U-Boot binary called u-boot-dtb.imx

* Install U-Boot to MicroSD card

  Plug MicroSD card to a Linux machine (with card reader), find the
  device name and replace sd[x] with the name in the following command.

  $ sudo dd if=u-boot-dtb.imx of=/dev/sd[x] bs=512 seek=2

  It will install U-Boot to MicroSD card at 1KiB offset.  Insert the
  card to Meerkat96 MicroSD slot, power up the board, and U-Boot should
  boot from the card.