u-boot/arch/arm/cpu/armv7/omap-common
Lokesh Vutla c997da5c53 ARM: DRA7: emif: Fix DDR init sequence during warm reset
Unlike OMAP5, EMIF PHY used in DRA7 will be left in unknown state after
warm reset, emif needs to be configured to bring it back to a known
state. So configure EMIF during warm reset.

Reported-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2015-06-15 10:57:27 -04:00
..
abb.c replace DIV_ROUND with DIV_ROUND_CLOSEST 2014-11-20 11:28:25 -05:00
boot-common.c fastboot: ARM: OMAP5: Enable reboot-bootloader 2015-04-23 14:55:44 -04:00
clocks-common.c am33xx: Re-enable SW levelling for DDR2 2015-06-15 10:57:26 -04:00
emif-common.c ARM: DRA7: emif: Fix DDR init sequence during warm reset 2015-06-15 10:57:27 -04:00
hwinit-common.c ti: armv7: Move SPL SDRAM init to the right place, drop unused CONFIG_SPL_STACK 2015-03-04 14:55:04 -05:00
lowlevel_init.S ARM: OMAP3: Get rid of omap3_gp_romcode_call and replace with omap_smc1 2015-03-13 09:29:00 -04:00
Makefile ARM: OMAP3: Get rid of omap3_gp_romcode_call and replace with omap_smc1 2015-03-13 09:29:00 -04:00
mem-common.c ARM: omap: clean redundant PISMO_xx macros used in OMAP3 2014-07-25 16:26:12 -04:00
omap-cache.c am33xx/omap: Allow cache enable for all Sitara/OMAP 2014-06-11 16:25:39 -04:00
pipe3-phy.c ARM: OMAP5: Add Pipe3 PHY driver 2013-12-04 08:12:08 -05:00
pipe3-phy.h ARM: OMAP5: Add Pipe3 PHY driver 2013-12-04 08:12:08 -05:00
reset.c Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
sata.c ahci: mmio_base is a virtual address 2015-04-18 16:54:29 -04:00
timer.c omap-common/hwinit-common.c: timer_init() doesn't need to touch gd 2015-01-05 15:13:45 -05:00
u-boot-spl.lds arm: Add missing .vectors section to linker scripts 2014-08-30 07:46:41 -04:00
utils.c ARM: DRA7: Set serial number environment variable 2015-04-23 13:59:19 -04:00
vc.c ARM: OMAP4+: pmic: Make generic bus init and write functions 2013-06-10 08:43:09 -04:00