u-boot/board/freescale/common
Timur Tabi bfb707191a fsl: add support for NXID v1 EEPROM format
Freescale application note AN3638 describes an update to the NXID format,
which stores MAC addresses and related data on an on-board EEPROM.  The new
version adds support for up to 23 MAC addresses, instead of just 8.  Since
the initial implementation of NXID had a "0" in the 'version' field, this
new version is called "v1".

Boards that are shipped with EEPROMs in the NXID v1 format should define
CONFIG_SYS_I2C_EEPROM_NXID_1 instead of CONFIG_SYS_I2C_EEPROM_NXID.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-07 09:57:07 -05:00
..
cadmus.c rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
cadmus.h Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale. 2007-12-11 22:34:20 -06:00
cds_pci_ft.c FSL: Clean up board/freescale/common/Makefile 2008-03-26 11:43:04 -05:00
cds_via.c FSL: Clean up board/freescale/common/Makefile 2008-03-26 11:43:04 -05:00
eeprom.h Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale. 2007-12-11 22:34:20 -06:00
fsl_diu_fb.c fsl_diu_fb: further refactoring of FSL DIU code 2010-09-25 13:10:03 +02:00
ics307_clk.c Move ICS CLK chip frequency calculation code into a common board library 2010-07-16 10:55:08 -05:00
ics307_clk.h Move ICS CLK chip frequency calculation code into a common board library 2010-07-16 10:55:08 -05:00
Makefile fsl: refactor MPC8610 and MPC5121 DIU code to use existing bitmap and logo features 2010-09-21 22:46:02 +02:00
ngpixis.c Make sure that argv[] argument pointers are not modified. 2010-07-04 23:55:42 +02:00
ngpixis.h ppc/85xx: Add a structure defn for PIXIS registers 2010-07-16 10:55:08 -05:00
pixis.c Make sure that argv[] argument pointers are not modified. 2010-07-04 23:55:42 +02:00
pixis.h ppc/85xx: Add a structure defn for PIXIS registers 2010-07-16 10:55:08 -05:00
pq-mds-pib.c ppc/85xx: Add PIB/ATM support for MPC8569mds 2010-01-25 22:13:26 -06:00
pq-mds-pib.h mpc83xx: Split PIB init code from pci.c and add Qoc3 ATM card support 2007-08-16 23:12:11 -05:00
sgmii_riser.c fsl: Remove unnecessary debug printfs 2009-03-09 17:46:10 -05:00
sgmii_riser.h Fixup SGMII PHY ids in the device tree 2009-02-16 18:05:54 -06:00
sys_eeprom.c fsl: add support for NXID v1 EEPROM format 2010-10-07 09:57:07 -05:00
via.h Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale. 2007-12-11 22:34:20 -06:00