mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-12 07:57:21 +00:00
308520b8f2
This removes the following unreferenced CONFIG symbols: CONFIG_FDTADDR CONFIG_FDTFILE CONFIG_FLASH_SECTOR_SIZE CONFIG_FSL_CPLD CONFIG_HDMI_ENCODER_I2C_ADDR CONFIG_I2C_MVTWSI CONFIG_I2C_RTC_ADDR CONFIG_IRAM_END CONFIG_IRAM_SIZE CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE CONFIG_L1_INIT_RAM CONFIG_MACB_SEARCH_PHY CONFIG_MIU_2BIT_21_7_INTERLEAVED CONFIG_MTD_NAND_VERIFY_WRITE CONFIG_MVGBE_PORTS CONFIG_NETDEV CONFIG_NUM_DSP_CPUS CONFIG_PHY_BASE_ADR CONFIG_PHY_INTERFACE_MODE CONFIG_PSRAM_SCFG CONFIG_RAMBOOT_SPIFLASH CONFIG_RAMBOOT_TEXT_BASE CONFIG_RD_LVL CONFIG_ROCKCHIP_SDHCI_MAX_FREQ CONFIG_SETUP_INITRD_TAG CONFIG_SH_QSPI_BASE CONFIG_SMDK5420 CONFIG_SOCRATES CONFIG_SPI_ADDR CONFIG_SPI_FLASH_QUAD CONFIG_SPI_FLASH_SIZE CONFIG_SPI_HALF_DUPLEX CONFIG_SPI_N25Q256A_RESET CONFIG_TEGRA_SLINK_CTRLS CONFIG_TPM_TIS_BASE_ADDRESS CONFIG_UBOOT_SECTOR_COUNT CONFIG_UBOOT_SECTOR_START CONFIG_VAR_SIZE_SPL CONFIG_VERY_BIG_RAM And also: BL1_SIZE PHY_NO RESERVE_BLOCK_SIZE Signed-off-by: Tom Rini <trini@konsulko.com>
92 lines
2.3 KiB
C
92 lines
2.3 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* (C) Copyright 2011
|
|
* egnite GmbH <info@egnite.de>
|
|
*
|
|
* Configuation settings for Ethernut 5 with AT91SAM9XE.
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#include <asm/hardware.h>
|
|
|
|
/* The first stage boot loader expects u-boot running at this address. */
|
|
|
|
/* The first stage boot loader takes care of low level initialization. */
|
|
|
|
/* CPU information */
|
|
|
|
/* ARM asynchronous clock */
|
|
#define CFG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
|
|
#define CFG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432 MHz crystal */
|
|
|
|
/* 32kB internal SRAM */
|
|
#define CFG_SYS_INIT_RAM_ADDR 0x00300000 /*AT91SAM9XE_SRAM_BASE */
|
|
#define CFG_SYS_INIT_RAM_SIZE (32 << 10)
|
|
|
|
/* 128MB SDRAM in 1 bank */
|
|
#define CFG_SYS_SDRAM_BASE 0x20000000
|
|
#define CFG_SYS_SDRAM_SIZE (128 << 20)
|
|
|
|
/* 512kB on-chip NOR flash */
|
|
# define CFG_SYS_FLASH_BASE 0x00200000 /* AT91SAM9XE_FLASH_BASE */
|
|
|
|
|
|
/* bootstrap + u-boot + env + linux in dataflash on CS0 */
|
|
|
|
/* NAND flash */
|
|
#ifdef CONFIG_CMD_NAND
|
|
#define CFG_SYS_NAND_BASE 0x40000000
|
|
/* our ALE is AD21 */
|
|
#define CFG_SYS_NAND_MASK_ALE (1 << 21)
|
|
/* our CLE is AD22 */
|
|
#define CFG_SYS_NAND_MASK_CLE (1 << 22)
|
|
#define CFG_SYS_NAND_ENABLE_PIN GPIO_PIN_PC(14)
|
|
#endif
|
|
|
|
/* JFFS2 */
|
|
|
|
/* Ethernet */
|
|
#define CONFIG_PHY_ID 0
|
|
|
|
/* MMC */
|
|
#ifdef CONFIG_CMD_MMC
|
|
#define CFG_SYS_MMC_CD_PIN AT91_PIO_PORTC, 8
|
|
#endif
|
|
|
|
/* RTC */
|
|
#if defined(CONFIG_CMD_DATE) || defined(CONFIG_CMD_SNTP)
|
|
#define CFG_SYS_I2C_RTC_ADDR 0x51
|
|
#endif
|
|
|
|
/* I2C */
|
|
#define CFG_SYS_MAX_I2C_BUS 1
|
|
|
|
#define I2C_SOFT_DECLARATIONS
|
|
|
|
#define GPIO_I2C_SCL AT91_PIO_PORTA, 24
|
|
#define GPIO_I2C_SDA AT91_PIO_PORTA, 23
|
|
|
|
#define I2C_INIT { \
|
|
at91_set_pio_periph(AT91_PIO_PORTA, 23, 0); \
|
|
at91_set_pio_multi_drive(AT91_PIO_PORTA, 23, 1); \
|
|
at91_set_pio_periph(AT91_PIO_PORTA, 24, 0); \
|
|
at91_set_pio_output(AT91_PIO_PORTA, 24, 0); \
|
|
at91_set_pio_multi_drive(AT91_PIO_PORTA, 24, 1); \
|
|
}
|
|
|
|
#define I2C_ACTIVE at91_set_pio_output(AT91_PIO_PORTA, 23, 0)
|
|
#define I2C_TRISTATE at91_set_pio_input(AT91_PIO_PORTA, 23, 0)
|
|
#define I2C_SCL(bit) at91_set_pio_value(AT91_PIO_PORTA, 24, bit)
|
|
#define I2C_SDA(bit) at91_set_pio_value(AT91_PIO_PORTA, 23, bit)
|
|
#define I2C_DELAY udelay(100)
|
|
#define I2C_READ at91_get_pio_value(AT91_PIO_PORTA, 23)
|
|
|
|
/* File systems */
|
|
|
|
/* Boot command */
|
|
|
|
/* Misc. u-boot settings */
|
|
|
|
#endif
|