Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-20 02:03:09 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/net/mscc_eswitch/felix_switch.c
Andrew Scull 2635e3b50f pci: Add mask parameter to dm_pci_map_bar() 
Add a mask parameter to control the lookup of the PCI region from which
the mapping can be made.

Signed-off-by: Andrew Scull <ascull@google.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2022-05-03 18:33:29 -04:00

436 lines
13 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
/*
* Felix (VSC9959) Ethernet switch driver
* Copyright 2018-2021 NXP
*/
/*
* This driver is used for the Ethernet switch integrated into NXP LS1028A.
* Felix switch is derived from Microsemi Ocelot but there are several NXP
* adaptations that makes the two U-Boot drivers largely incompatible.
*
* Felix on LS1028A has 4 front panel ports and two internal ports, connected
* to ENETC interfaces. We're using one of the ENETC interfaces to push traffic
* into the switch. Injection/extraction headers are used to identify
* egress/ingress ports in the switch for Tx/Rx.
*/
#include <dm/device_compat.h>
#include <dm/of_extra.h>
#include <linux/delay.h>
#include <net/dsa.h>
#include <asm/io.h>
#include <miiphy.h>
#include <pci.h>
/* defines especially around PCS are reused from enetc */
#include "../fsl_enetc.h"
#define PCI_DEVICE_ID_FELIX_ETHSW 0xEEF0
/* Felix has in fact 6 ports, but we don't use the last internal one */
#define FELIX_PORT_COUNT 5
/* Front panel port mask */
#define FELIX_FP_PORT_MASK 0xf
/* Register map for BAR4 */
#define FELIX_SYS 0x010000
#define FELIX_ES0 0x040000
#define FELIX_IS1 0x050000
#define FELIX_IS2 0x060000
#define FELIX_GMII(port) (0x100000 + (port) * 0x10000)
#define FELIX_QSYS 0x200000
#define FELIX_DEVCPU_GCB 0x070000
#define FELIX_DEVCPU_GCB_SOFT_RST (FELIX_DEVCPU_GCB + 0x00000004)
#define SOFT_SWC_RST BIT(0)
#define FELIX_SYS_SYSTEM (FELIX_SYS + 0x00000E00)
#define FELIX_SYS_SYSTEM_EN BIT(0)
#define FELIX_SYS_RAM_CTRL (FELIX_SYS + 0x00000F24)
#define FELIX_SYS_RAM_CTRL_INIT BIT(1)
#define FELIX_SYS_SYSTEM_PORT_MODE(a) (FELIX_SYS_SYSTEM + 0xC + (a) * 4)
#define FELIX_SYS_SYSTEM_PORT_MODE_CPU 0x0000001e
#define FELIX_ES0_TCAM_CTRL (FELIX_ES0 + 0x000003C0)
#define FELIX_ES0_TCAM_CTRL_EN BIT(0)
#define FELIX_IS1_TCAM_CTRL (FELIX_IS1 + 0x000003C0)
#define FELIX_IS1_TCAM_CTRL_EN BIT(0)
#define FELIX_IS2_TCAM_CTRL (FELIX_IS2 + 0x000003C0)
#define FELIX_IS2_TCAM_CTRL_EN BIT(0)
#define FELIX_GMII_CLOCK_CFG(port) (FELIX_GMII(port) + 0x00000000)
#define FELIX_GMII_CLOCK_CFG_LINK_1G 1
#define FELIX_GMII_CLOCK_CFG_LINK_100M 2
#define FELIX_GMII_CLOCK_CFG_LINK_10M 3
#define FELIX_GMII_MAC_ENA_CFG(port) (FELIX_GMII(port) + 0x0000001C)
#define FELIX_GMII_MAX_ENA_CFG_TX BIT(0)
#define FELIX_GMII_MAX_ENA_CFG_RX BIT(4)
#define FELIX_GMII_MAC_IFG_CFG(port) (FELIX_GMII(port) + 0x0000001C + 0x14)
#define FELIX_GMII_MAC_IFG_CFG_DEF 0x515
#define FELIX_QSYS_SYSTEM (FELIX_QSYS + 0x0000F460)
#define FELIX_QSYS_SYSTEM_SW_PORT_MODE(a) \
(FELIX_QSYS_SYSTEM + 0x20 + (a) * 4)
#define FELIX_QSYS_SYSTEM_SW_PORT_ENA BIT(14)
#define FELIX_QSYS_SYSTEM_SW_PORT_LOSSY BIT(9)
#define FELIX_QSYS_SYSTEM_SW_PORT_SCH(a) (((a) & 0x3800) << 11)
#define FELIX_QSYS_SYSTEM_EXT_CPU_CFG (FELIX_QSYS_SYSTEM + 0x80)
#define FELIX_QSYS_SYSTEM_EXT_CPU_PORT(a) (((a) & 0xf) << 8 | 0xff)
/* internal MDIO in BAR0 */
#define FELIX_PM_IMDIO_BASE 0x8030
/* Serdes block on LS1028A */
#define FELIX_SERDES_BASE 0x1ea0000L
#define FELIX_SERDES_LNATECR0(lane) (FELIX_SERDES_BASE + 0x818 + \
(lane) * 0x40)
#define FELIX_SERDES_LNATECR0_ADPT_EQ 0x00003000
#define FELIX_SERDES_SGMIICR1(lane) (FELIX_SERDES_BASE + 0x1804 + \
(lane) * 0x10)
#define FELIX_SERDES_SGMIICR1_SGPCS BIT(11)
#define FELIX_SERDES_SGMIICR1_MDEV(a) (((a) & 0x1f) << 27)
#define FELIX_PCS_CTRL 0
#define FELIX_PCS_CTRL_RST BIT(15)
/*
* The long prefix format used here contains two dummy MAC addresses, a magic
* value in place of a VLAN tag followed by the extraction/injection header and
* the original L2 frame. Out of all this we only use the port ID.
*/
#define FELIX_DSA_TAG_LEN sizeof(struct felix_dsa_tag)
#define FELIX_DSA_TAG_MAGIC 0x0a008088
#define FELIX_DSA_TAG_INJ_PORT 7
#define FELIX_DSA_TAG_INJ_PORT_SET(a) (0x1 << ((a) & FELIX_FP_PORT_MASK))
#define FELIX_DSA_TAG_EXT_PORT 10
#define FELIX_DSA_TAG_EXT_PORT_GET(a) ((a) >> 3)
struct felix_dsa_tag {
uchar d_mac[6];
uchar s_mac[6];
u32 magic;
uchar meta[16];
};
struct felix_priv {
void *regs_base;
void *imdio_base;
struct mii_dev imdio;
};
/* MDIO wrappers, we're using these to drive internal MDIO to get to serdes */
static int felix_mdio_read(struct mii_dev *bus, int addr, int devad, int reg)
{
struct enetc_mdio_priv priv;
priv.regs_base = bus->priv;
return enetc_mdio_read_priv(&priv, addr, devad, reg);
}
static int felix_mdio_write(struct mii_dev *bus, int addr, int devad, int reg,
u16 val)
{
struct enetc_mdio_priv priv;
priv.regs_base = bus->priv;
return enetc_mdio_write_priv(&priv, addr, devad, reg, val);
}
/* set up serdes for SGMII */
static void felix_init_sgmii(struct mii_dev *imdio, int pidx, bool an)
{
u16 reg;
/* set up PCS lane address */
out_le32(FELIX_SERDES_SGMIICR1(pidx), FELIX_SERDES_SGMIICR1_SGPCS |
FELIX_SERDES_SGMIICR1_MDEV(pidx));
/*
* Set to SGMII mode, for 1Gbps enable AN, for 2.5Gbps set fixed speed.
* Although fixed speed is 1Gbps, we could be running at 2.5Gbps based
* on PLL configuration. Setting 1G for 2.5G here is counter intuitive
* but intentional.
*/
reg = ENETC_PCS_IF_MODE_SGMII;
reg |= an ? ENETC_PCS_IF_MODE_SGMII_AN : ENETC_PCS_IF_MODE_SPEED_1G;
felix_mdio_write(imdio, pidx, MDIO_DEVAD_NONE,
ENETC_PCS_IF_MODE, reg);
/* Dev ability - SGMII */
felix_mdio_write(imdio, pidx, MDIO_DEVAD_NONE,
ENETC_PCS_DEV_ABILITY, ENETC_PCS_DEV_ABILITY_SGMII);
/* Adjust link timer for SGMII */
felix_mdio_write(imdio, pidx, MDIO_DEVAD_NONE,
ENETC_PCS_LINK_TIMER1, ENETC_PCS_LINK_TIMER1_VAL);
felix_mdio_write(imdio, pidx, MDIO_DEVAD_NONE,
ENETC_PCS_LINK_TIMER2, ENETC_PCS_LINK_TIMER2_VAL);
reg = ENETC_PCS_CR_DEF_VAL;
reg |= an ? ENETC_PCS_CR_RESET_AN : ENETC_PCS_CR_RST;
/* restart PCS AN */
felix_mdio_write(imdio, pidx, MDIO_DEVAD_NONE,
ENETC_PCS_CR, reg);
}
/* set up MAC and serdes for (Q)SXGMII */
static int felix_init_sxgmii(struct mii_dev *imdio, int pidx)
{
int timeout = 1000;
/* set up transit equalization control on serdes lane */
out_le32(FELIX_SERDES_LNATECR0(1), FELIX_SERDES_LNATECR0_ADPT_EQ);
/*reset lane */
felix_mdio_write(imdio, pidx, MDIO_MMD_PCS, FELIX_PCS_CTRL,
FELIX_PCS_CTRL_RST);
while (felix_mdio_read(imdio, pidx, MDIO_MMD_PCS,
FELIX_PCS_CTRL) & FELIX_PCS_CTRL_RST &&
--timeout) {
mdelay(10);
}
if (felix_mdio_read(imdio, pidx, MDIO_MMD_PCS,
FELIX_PCS_CTRL) & FELIX_PCS_CTRL_RST)
return -ETIME;
/* Dev ability - SXGMII */
felix_mdio_write(imdio, pidx, ENETC_PCS_DEVAD_REPL,
ENETC_PCS_DEV_ABILITY, ENETC_PCS_DEV_ABILITY_SXGMII);
/* Restart PCS AN */
felix_mdio_write(imdio, pidx, ENETC_PCS_DEVAD_REPL, ENETC_PCS_CR,
ENETC_PCS_CR_RST | ENETC_PCS_CR_RESET_AN);
felix_mdio_write(imdio, pidx, ENETC_PCS_DEVAD_REPL,
ENETC_PCS_REPL_LINK_TIMER_1,
ENETC_PCS_REPL_LINK_TIMER_1_DEF);
felix_mdio_write(imdio, pidx, ENETC_PCS_DEVAD_REPL,
ENETC_PCS_REPL_LINK_TIMER_2,
ENETC_PCS_REPL_LINK_TIMER_2_DEF);
return 0;
}
/* Apply protocol specific configuration to MAC, serdes as needed */
static void felix_start_pcs(struct udevice *dev, int port,
struct phy_device *phy, struct mii_dev *imdio)
{
ofnode node = dsa_port_get_ofnode(dev, port);
bool inband_an = ofnode_eth_uses_inband_aneg(node);
switch (phy->interface) {
case PHY_INTERFACE_MODE_SGMII:
case PHY_INTERFACE_MODE_2500BASEX:
case PHY_INTERFACE_MODE_QSGMII:
felix_init_sgmii(imdio, port, inband_an);
break;
case PHY_INTERFACE_MODE_10GBASER:
case PHY_INTERFACE_MODE_USXGMII:
if (felix_init_sxgmii(imdio, port))
dev_err(dev, "PCS reset timeout on port %d\n", port);
break;
default:
break;
}
}
static void felix_init(struct udevice *dev)
{
struct dsa_pdata *pdata = dev_get_uclass_plat(dev);
struct felix_priv *priv = dev_get_priv(dev);
void *base = priv->regs_base;
int timeout = 100;
/* Switch core reset */
out_le32(base + FELIX_DEVCPU_GCB_SOFT_RST, SOFT_SWC_RST);
while (in_le32(base + FELIX_DEVCPU_GCB_SOFT_RST) & SOFT_SWC_RST &&
--timeout)
udelay(10);
if (in_le32(base + FELIX_DEVCPU_GCB_SOFT_RST) & SOFT_SWC_RST)
dev_err(dev, "Timeout waiting for switch core reset\n");
timeout = 100;
/* Init core memories */
out_le32(base + FELIX_SYS_RAM_CTRL, FELIX_SYS_RAM_CTRL_INIT);
while (in_le32(base + FELIX_SYS_RAM_CTRL) & FELIX_SYS_RAM_CTRL_INIT &&
--timeout)
udelay(10);
if (in_le32(base + FELIX_SYS_RAM_CTRL) & FELIX_SYS_RAM_CTRL_INIT)
dev_err(dev, "Timeout waiting for switch memories\n");
/* Start switch core, set up ES0, IS1, IS2 */
out_le32(base + FELIX_SYS_SYSTEM, FELIX_SYS_SYSTEM_EN);
out_le32(base + FELIX_ES0_TCAM_CTRL, FELIX_ES0_TCAM_CTRL_EN);
out_le32(base + FELIX_IS1_TCAM_CTRL, FELIX_IS1_TCAM_CTRL_EN);
out_le32(base + FELIX_IS2_TCAM_CTRL, FELIX_IS2_TCAM_CTRL_EN);
udelay(20);
priv->imdio.read = felix_mdio_read;
priv->imdio.write = felix_mdio_write;
priv->imdio.priv = priv->imdio_base + FELIX_PM_IMDIO_BASE;
strlcpy(priv->imdio.name, dev->name, MDIO_NAME_LEN);
/* set up CPU port */
out_le32(base + FELIX_QSYS_SYSTEM_EXT_CPU_CFG,
FELIX_QSYS_SYSTEM_EXT_CPU_PORT(pdata->cpu_port));
out_le32(base + FELIX_SYS_SYSTEM_PORT_MODE(pdata->cpu_port),
FELIX_SYS_SYSTEM_PORT_MODE_CPU);
}
/*
* Probe Felix:
* - enable the PCI function
* - map BAR 4
* - init switch core and port registers
*/
static int felix_probe(struct udevice *dev)
{
struct felix_priv *priv = dev_get_priv(dev);
int err;
if (ofnode_valid(dev_ofnode(dev)) &&
!ofnode_is_available(dev_ofnode(dev))) {
dev_dbg(dev, "switch disabled\n");
return -ENODEV;
}
priv->imdio_base = dm_pci_map_bar(dev, PCI_BASE_ADDRESS_0, 0, 0, PCI_REGION_TYPE, 0);
if (!priv->imdio_base) {
dev_err(dev, "failed to map BAR0\n");
return -EINVAL;
}
priv->regs_base = dm_pci_map_bar(dev, PCI_BASE_ADDRESS_4, 0, 0, PCI_REGION_TYPE, 0);
if (!priv->regs_base) {
dev_err(dev, "failed to map BAR4\n");
return -EINVAL;
}
/* register internal MDIO for debug */
if (!miiphy_get_dev_by_name(dev->name)) {
struct mii_dev *mii_bus;
mii_bus = mdio_alloc();
if (!mii_bus)
return -ENOMEM;
mii_bus->read = felix_mdio_read;
mii_bus->write = felix_mdio_write;
mii_bus->priv = priv->imdio_base + FELIX_PM_IMDIO_BASE;
strlcpy(mii_bus->name, dev->name, MDIO_NAME_LEN);
err = mdio_register(mii_bus);
if (err) {
mdio_free(mii_bus);
return err;
}
}
dm_pci_clrset_config16(dev, PCI_COMMAND, 0, PCI_COMMAND_MEMORY);
dsa_set_tagging(dev, FELIX_DSA_TAG_LEN, 0);
/* set up registers */
felix_init(dev);
return 0;
}
static int felix_port_probe(struct udevice *dev, int port,
struct phy_device *phy)
{
int supported = PHY_GBIT_FEATURES | SUPPORTED_2500baseX_Full;
struct felix_priv *priv = dev_get_priv(dev);
phy->supported &= supported;
phy->advertising &= supported;
felix_start_pcs(dev, port, phy, &priv->imdio);
return phy_config(phy);
}
static int felix_port_enable(struct udevice *dev, int port,
struct phy_device *phy)
{
struct felix_priv *priv = dev_get_priv(dev);
void *base = priv->regs_base;
/* Set up MAC registers */
out_le32(base + FELIX_GMII_CLOCK_CFG(port),
FELIX_GMII_CLOCK_CFG_LINK_1G);
out_le32(base + FELIX_GMII_MAC_IFG_CFG(port),
FELIX_GMII_MAC_IFG_CFG_DEF);
out_le32(base + FELIX_GMII_MAC_ENA_CFG(port),
FELIX_GMII_MAX_ENA_CFG_TX | FELIX_GMII_MAX_ENA_CFG_RX);
out_le32(base + FELIX_QSYS_SYSTEM_SW_PORT_MODE(port),
FELIX_QSYS_SYSTEM_SW_PORT_ENA |
FELIX_QSYS_SYSTEM_SW_PORT_LOSSY |
FELIX_QSYS_SYSTEM_SW_PORT_SCH(1));
return phy_startup(phy);
}
static void felix_port_disable(struct udevice *dev, int pidx,
struct phy_device *phy)
{
struct felix_priv *priv = dev_get_priv(dev);
void *base = priv->regs_base;
out_le32(base + FELIX_GMII_MAC_ENA_CFG(pidx), 0);
out_le32(base + FELIX_QSYS_SYSTEM_SW_PORT_MODE(pidx),
FELIX_QSYS_SYSTEM_SW_PORT_LOSSY |
FELIX_QSYS_SYSTEM_SW_PORT_SCH(1));
/*
* we don't call phy_shutdown here to avoid waiting next time we use
* the port, but the downside is that remote side will think we're
* actively processing traffic although we are not.
*/
}
static int felix_xmit(struct udevice *dev, int pidx, void *packet, int length)
{
struct felix_dsa_tag *tag = packet;
tag->magic = FELIX_DSA_TAG_MAGIC;
tag->meta[FELIX_DSA_TAG_INJ_PORT] = FELIX_DSA_TAG_INJ_PORT_SET(pidx);
return 0;
}
static int felix_rcv(struct udevice *dev, int *pidx, void *packet, int length)
{
struct felix_dsa_tag *tag = packet;
if (tag->magic != FELIX_DSA_TAG_MAGIC)
return -EINVAL;
*pidx = FELIX_DSA_TAG_EXT_PORT_GET(tag->meta[FELIX_DSA_TAG_EXT_PORT]);
return 0;
}
static const struct dsa_ops felix_dsa_ops = {
.port_probe = felix_port_probe,
.port_enable = felix_port_enable,
.port_disable = felix_port_disable,
.xmit = felix_xmit,
.rcv = felix_rcv,
};
U_BOOT_DRIVER(felix_ethsw) = {
.name = "felix-switch",
.id = UCLASS_DSA,
.probe = felix_probe,
.ops = &felix_dsa_ops,
.priv_auto = sizeof(struct felix_priv),
};
static struct pci_device_id felix_ethsw_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_FREESCALE, PCI_DEVICE_ID_FELIX_ETHSW) },
{}
};
U_BOOT_PCI_DEVICE(felix_ethsw, felix_ethsw_ids);
Reference in a new issue View git blame Copy permalink