u-boot/include/fsl_nfc.h
John Rigby f3bb63a304 Add MX25 support to nand_spl fsl nfc driver
MX25 has a different version of the fsl_nfc
flash controller known as version 1.1.

Add support to the nand_spl fsl_nfc driver

Versioning differs from mainline mxc kernel driver
no consensus yet on if the naming here and in
Redboot or the kernel is "correct".

Signed-off-by: John Rigby <jcrigby@gmail.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
CC: Scott Wood <scottwood@freescale.com>
2010-01-27 14:22:41 -06:00

171 lines
4.3 KiB
C

/*
* (c) 2009 Magnus Lilja <lilja.magnus@gmail.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __FSL_NFC_H
#define __FSL_NFC_H
/*
* TODO: Use same register defs for nand_spl mxc nand driver
* and mtd mxc nand driver.
*
* Register map and bit definitions for the Freescale NAND Flash
* Controller present in various i.MX devices.
*
* MX31 and MX27 have version 1 which has
* 4 512 byte main buffers and
* 4 16 byte spare buffers
* to support up to 2K byte pagesize nand.
* Reading or writing a 2K page requires 4 FDI/FDO cycles.
*
* MX25 has version 1.1 which has
* 8 512 byte main buffers and
* 8 64 byte spare buffers
* to support up to 4K byte pagesize nand.
* Reading or writing a 2K or 4K page requires only 1 FDI/FDO cycle.
* Also some of registers are moved and/or changed meaning as seen below.
*/
#if defined(CONFIG_MX31) || defined(CONFIG_MX27)
#define MXC_NFC_V1
#elif defined(CONFIG_MX25)
#define MXC_NFC_V1_1
#else
#warning "MXC NFC version not defined"
#endif
#if defined(MXC_NFC_V1)
#define NAND_MXC_NR_BUFS 4
#define NAND_MXC_SPARE_BUF_SIZE 16
#define NAND_MXC_REG_OFFSET 0xe00
#define NAND_MXC_2K_MULTI_CYCLE 1
#elif defined(MXC_NFC_V1_1)
#define NAND_MXC_NR_BUFS 8
#define NAND_MXC_SPARE_BUF_SIZE 64
#define NAND_MXC_REG_OFFSET 0x1e00
#else
#error "define CONFIG_NAND_MXC_VXXX to use the mxc spl_nand driver"
#endif
struct fsl_nfc_regs {
u32 main_area[NAND_MXC_NR_BUFS][512/4];
u32 spare_area[NAND_MXC_NR_BUFS][NAND_MXC_SPARE_BUF_SIZE/4];
/*
* reserved size is offset of nfc registers
* minus total main and spare sizes
*/
u8 reserved1[NAND_MXC_REG_OFFSET
- NAND_MXC_NR_BUFS * (512 + NAND_MXC_SPARE_BUF_SIZE)];
#if defined(MXC_NFC_V1)
u16 bufsiz;
u16 reserved2;
u16 buffer_address;
u16 flash_add;
u16 flash_cmd;
u16 configuration;
u16 ecc_status_result;
u16 ecc_rslt_main_area;
u16 ecc_rslt_spare_area;
u16 nf_wr_prot;
u16 unlock_start_blk_add;
u16 unlock_end_blk_add;
u16 nand_flash_wr_pr_st;
u16 nand_flash_config1;
u16 nand_flash_config2;
#elif defined(MXC_NFC_V1_1)
u16 reserved2[2];
u16 buffer_address;
u16 flash_add;
u16 flash_cmd;
u16 configuration;
u16 ecc_status_result;
u16 ecc_status_result2;
u16 spare_area_size;
u16 nf_wr_prot;
u16 reserved3[2];
u16 nand_flash_wr_pr_st;
u16 nand_flash_config1;
u16 nand_flash_config2;
u16 reserved4;
u16 unlock_start_blk_add0;
u16 unlock_end_blk_add0;
u16 unlock_start_blk_add1;
u16 unlock_end_blk_add1;
u16 unlock_start_blk_add2;
u16 unlock_end_blk_add2;
u16 unlock_start_blk_add3;
u16 unlock_end_blk_add3;
#endif
};
/*
* Set INT to 0, FCMD to 1, rest to 0 in NFC_CONFIG2 Register for Command
* operation
*/
#define NFC_CMD 0x1
/*
* Set INT to 0, FADD to 1, rest to 0 in NFC_CONFIG2 Register for Address
* operation
*/
#define NFC_ADDR 0x2
/*
* Set INT to 0, FDI to 1, rest to 0 in NFC_CONFIG2 Register for Input
* operation
*/
#define NFC_INPUT 0x4
/*
* Set INT to 0, FDO to 001, rest to 0 in NFC_CONFIG2 Register for Data
* Output operation
*/
#define NFC_OUTPUT 0x8
/*
* Set INT to 0, FD0 to 010, rest to 0 in NFC_CONFIG2 Register for Read ID
* operation
*/
#define NFC_ID 0x10
/*
* Set INT to 0, FDO to 100, rest to 0 in NFC_CONFIG2 Register for Read
* Status operation
*/
#define NFC_STATUS 0x20
/*
* Set INT to 1, rest to 0 in NFC_CONFIG2 Register for Read Status
* operation
*/
#define NFC_INT 0x8000
#ifdef MXC_NFC_V1_1
#define NFC_4_8N_ECC (1 << 0)
#endif
#define NFC_SP_EN (1 << 2)
#define NFC_ECC_EN (1 << 3)
#define NFC_INT_MSK (1 << 4)
#define NFC_BIG (1 << 5)
#define NFC_RST (1 << 6)
#define NFC_CE (1 << 7)
#define NFC_ONE_CYCLE (1 << 8)
#endif /* __FSL_NFC_H */