Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-11 22:03:15 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/board/bosch/guardian/board.c
Tom Rini a2ac2b964b Convert CONFIG_SKIP_LOWLEVEL_INIT et al to Kconfig 
This converts the following to Kconfig:
   CONFIG_SKIP_LOWLEVEL_INIT
   CONFIG_SKIP_LOWLEVEL_INIT_ONLY

In order to do this, we need to introduce SPL and TPL variants of these
options so that we can clearly disable these options only in SPL in some
cases, and both instances in other cases.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-31 17:47:49 -04:00

347 lines
7.8 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* board.c
*
* Board functions for Bosch Guardian
*
* Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
* Copyright (C) 2018 Robert Bosch Power Tools GmbH
*/
#include <common.h>
#include <dm.h>
#include <env_internal.h>
#include <errno.h>
#include <i2c.h>
#include <led.h>
#include <panel.h>
#include <linux/delay.h>
#include <asm/global_data.h>
#include <power/tps65217.h>
#include <spl.h>
#include <watchdog.h>
#include <asm/arch/clock.h>
#include <asm/arch/cpu.h>
#include <asm/arch/ddr_defs.h>
#include <asm/arch/gpio.h>
#include <asm/arch/hardware.h>
#include <asm/arch/mem-guardian.h>
#include <asm/arch/omap.h>
#include <asm/arch/sys_proto.h>
#include <asm/emif.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <jffs2/load_kernel.h>
#include <mtd.h>
#include <nand.h>
#include <video.h>
#include <video_console.h>
#include "board.h"
DECLARE_GLOBAL_DATA_PTR;
#if !CONFIG_IS_ENABLED(SKIP_LOWLEVEL_INIT)
static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
static const struct ddr_data ddr3_data = {
.datardsratio0 = MT41K128M16JT125K_RD_DQS,
.datawdsratio0 = MT41K128M16JT125K_WR_DQS,
.datafwsratio0 = MT41K128M16JT125K_PHY_FIFO_WE,
.datawrsratio0 = MT41K128M16JT125K_PHY_WR_DATA,
};
static const struct cmd_control ddr3_cmd_ctrl_data = {
.cmd0csratio = MT41K128M16JT125K_RATIO,
.cmd0iclkout = MT41K128M16JT125K_INVERT_CLKOUT,
.cmd1csratio = MT41K128M16JT125K_RATIO,
.cmd1iclkout = MT41K128M16JT125K_INVERT_CLKOUT,
.cmd2csratio = MT41K128M16JT125K_RATIO,
.cmd2iclkout = MT41K128M16JT125K_INVERT_CLKOUT,
};
static struct emif_regs ddr3_emif_reg_data = {
.sdram_config = MT41K128M16JT125K_EMIF_SDCFG,
.ref_ctrl = MT41K128M16JT125K_EMIF_SDREF,
.sdram_tim1 = MT41K128M16JT125K_EMIF_TIM1,
.sdram_tim2 = MT41K128M16JT125K_EMIF_TIM2,
.sdram_tim3 = MT41K128M16JT125K_EMIF_TIM3,
.zq_config = MT41K128M16JT125K_ZQ_CFG,
.emif_ddr_phy_ctlr_1 = MT41K128M16JT125K_EMIF_READ_LATENCY,
};
#define OSC (V_OSCK / 1000000)
const struct dpll_params dpll_ddr = {
400, OSC - 1, 1, -1, -1, -1, -1};
void am33xx_spl_board_init(void)
{
int mpu_vdd;
int usb_cur_lim;
/* Get the frequency */
dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev);
if (i2c_probe(TPS65217_CHIP_PM))
return;
/*
* Increase USB current limit to 1300mA or 1800mA and set
* the MPU voltage controller as needed.
*/
if (dpll_mpu_opp100.m == MPUPLL_M_1000) {
usb_cur_lim = TPS65217_USB_INPUT_CUR_LIMIT_1800MA;
mpu_vdd = TPS65217_DCDC_VOLT_SEL_1325MV;
} else {
usb_cur_lim = TPS65217_USB_INPUT_CUR_LIMIT_1300MA;
mpu_vdd = TPS65217_DCDC_VOLT_SEL_1275MV;
}
if (tps65217_reg_write(TPS65217_PROT_LEVEL_NONE,
TPS65217_POWER_PATH,
usb_cur_lim,
TPS65217_USB_INPUT_CUR_LIMIT_MASK))
puts("tps65217_reg_write failure\n");
/* Set DCDC3 (CORE) voltage to 1.125V */
if (tps65217_voltage_update(TPS65217_DEFDCDC3,
TPS65217_DCDC_VOLT_SEL_1125MV)) {
puts("tps65217_voltage_update failure\n");
return;
}
/* Set CORE Frequencies to OPP100 */
do_setup_dpll(&dpll_core_regs, &dpll_core_opp100);
/* Set DCDC2 (MPU) voltage */
if (tps65217_voltage_update(TPS65217_DEFDCDC2, mpu_vdd)) {
puts("tps65217_voltage_update failure\n");
return;
}
/*
* Set LDO3 to 1.8V and LDO4 to 3.3V
*/
if (tps65217_reg_write(TPS65217_PROT_LEVEL_2,
TPS65217_DEFLS1,
TPS65217_LDO_VOLTAGE_OUT_1_8,
TPS65217_LDO_MASK))
puts("tps65217_reg_write failure\n");
if (tps65217_reg_write(TPS65217_PROT_LEVEL_2,
TPS65217_DEFLS2,
TPS65217_LDO_VOLTAGE_OUT_3_3,
TPS65217_LDO_MASK))
puts("tps65217_reg_write failure\n");
/* Set MPU Frequency to what we detected now that voltages are set */
do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100);
}
const struct dpll_params *get_dpll_ddr_params(void)
{
enable_i2c0_pin_mux();
i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
return &dpll_ddr;
}
void set_uart_mux_conf(void)
{
enable_uart0_pin_mux();
}
void set_mux_conf_regs(void)
{
enable_board_pin_mux();
}
const struct ctrl_ioregs ioregs = {
.cm0ioctl = MT41K128M16JT125K_IOCTRL_VALUE,
.cm1ioctl = MT41K128M16JT125K_IOCTRL_VALUE,
.cm2ioctl = MT41K128M16JT125K_IOCTRL_VALUE,
.dt0ioctl = MT41K128M16JT125K_IOCTRL_VALUE,
.dt1ioctl = MT41K128M16JT125K_IOCTRL_VALUE,
};
void sdram_init(void)
{
config_ddr(400, &ioregs,
&ddr3_data,
&ddr3_cmd_ctrl_data,
&ddr3_emif_reg_data, 0);
}
#endif
int board_init(void)
{
save_omap_boot_params();
#if defined(CONFIG_HW_WATCHDOG)
hw_watchdog_init();
#endif
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
#ifdef CONFIG_MTD_RAW_NAND
gpmc_init();
#endif
return 0;
}
#ifdef CONFIG_BOARD_LATE_INIT
static void set_bootmode_env(void)
{
char *boot_mode_gpio = "gpio@44e07000_14";
int ret;
struct gpio_desc boot_mode_desc;
ret = dm_gpio_lookup_name(boot_mode_gpio, &boot_mode_desc);
if (ret) {
printf("%s is not found\n", boot_mode_gpio);
goto err;
}
ret = dm_gpio_request(&boot_mode_desc, "setup_bootmode_env");
if (ret && ret != -EBUSY) {
printf("requesting gpio: %s failed\n", boot_mode_gpio);
goto err;
}
dm_gpio_set_dir_flags(&boot_mode_desc, GPIOD_IS_IN);
udelay(10);
ret = dm_gpio_get_value(&boot_mode_desc);
if (ret == 0) {
env_set("swi_status", "1");
} else if (ret == 1) {
env_set("swi_status", "0");
} else {
printf("swi status gpio error\n");
goto err;
}
return;
err:
env_set("swi_status", "err");
}
void lcdbacklight_en(void)
{
unsigned long brightness = env_get_ulong("backlight_brightness", 10, 50);
if (brightness > 99 || brightness == 0)
brightness = 99;
/*
* Brightness range:
* WLEDCTRL2 DUTY[6:0]
*
* 000 0000b = 1%
* 000 0001b = 2%
* ...
* 110 0010b = 99%
* 110 0011b = 100%
*
*/
tps65217_reg_write(TPS65217_PROT_LEVEL_NONE, TPS65217_WLEDCTRL2,
brightness, 0xFF);
tps65217_reg_write(TPS65217_PROT_LEVEL_NONE, TPS65217_WLEDCTRL1,
brightness != 0 ? 0x0A : 0x02, 0xFF);
}
#if IS_ENABLED(CONFIG_AM335X_LCD)
static void splash_screen(void)
{
struct udevice *video_dev;
struct udevice *console_dev;
struct video_priv *vid_priv;
struct mtd_info *mtd;
size_t len;
int ret;
struct mtd_device *mtd_dev;
struct part_info *part;
u8 pnum;
ret = uclass_get_device(UCLASS_VIDEO, 0, &video_dev);
if (ret != 0) {
debug("video device not found\n");
goto exit;
}
vid_priv = dev_get_uclass_priv(video_dev);
mtdparts_init();
if (find_dev_and_part(SPLASH_SCREEN_NAND_PART, &mtd_dev, &pnum, &part)) {
debug("Could not find nand partition\n");
goto splash_screen_text;
}
mtd = get_nand_dev_by_index(mtd_dev->id->num);
if (!mtd) {
debug("MTD partition is not valid\n");
goto splash_screen_text;
}
len = SPLASH_SCREEN_BMP_FILE_SIZE;
ret = nand_read_skip_bad(mtd, part->offset, &len, NULL,
SPLASH_SCREEN_BMP_FILE_SIZE,
(u_char *)SPLASH_SCREEN_BMP_LOAD_ADDR);
if (ret != 0) {
debug("Reading NAND partition failed\n");
goto splash_screen_text;
}
ret = video_bmp_display(video_dev, SPLASH_SCREEN_BMP_LOAD_ADDR, 0, 0, false);
if (ret != 0) {
debug("No valid bmp image found!!\n");
goto splash_screen_text;
} else {
goto exit;
}
splash_screen_text:
vid_priv->colour_fg = CONSOLE_COLOR_RED;
vid_priv->colour_bg = CONSOLE_COLOR_BLACK;
if (!uclass_first_device_err(UCLASS_VIDEO_CONSOLE, &console_dev)) {
debug("Found console\n");
vidconsole_position_cursor(console_dev, 17, 7);
vidconsole_put_string(console_dev, SPLASH_SCREEN_TEXT);
} else {
debug("No console device found\n");
}
exit:
return;
}
#endif /* CONFIG_AM335X_LCD */
int board_late_init(void)
{
int ret;
struct udevice *cdev;
#ifdef CONFIG_LED_GPIO
led_default_state();
#endif
set_bootmode_env();
ret = uclass_get_device(UCLASS_PANEL, 0, &cdev);
if (ret) {
debug("video panel not found: %d\n", ret);
return ret;
}
lcdbacklight_en();
if (IS_ENABLED(CONFIG_AM335X_LCD))
splash_screen();
return 0;
}
#endif /* CONFIG_BOARD_LATE_INIT */
Reference in a new issue View git blame Copy permalink