Lokesh Vutla c997da5c53 ARM: DRA7: emif: Fix DDR init sequence during warm reset ... Unlike OMAP5, EMIF PHY used in DRA7 will be left in unknown state after warm reset, emif needs to be configured to bring it back to a known state. So configure EMIF during warm reset. Reported-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>		2015-06-15 10:57:27 -04:00
..
abb.c	replace DIV_ROUND with DIV_ROUND_CLOSEST	2014-11-20 11:28:25 -05:00
boot-common.c	fastboot: ARM: OMAP5: Enable reboot-bootloader	2015-04-23 14:55:44 -04:00
clocks-common.c	am33xx: Re-enable SW levelling for DDR2	2015-06-15 10:57:26 -04:00
emif-common.c	ARM: DRA7: emif: Fix DDR init sequence during warm reset	2015-06-15 10:57:27 -04:00
hwinit-common.c	ti: armv7: Move SPL SDRAM init to the right place, drop unused CONFIG_SPL_STACK	2015-03-04 14:55:04 -05:00
lowlevel_init.S	ARM: OMAP3: Get rid of omap3_gp_romcode_call and replace with omap_smc1	2015-03-13 09:29:00 -04:00
Makefile	ARM: OMAP3: Get rid of omap3_gp_romcode_call and replace with omap_smc1	2015-03-13 09:29:00 -04:00
mem-common.c	ARM: omap: clean redundant PISMO_xx macros used in OMAP3	2014-07-25 16:26:12 -04:00
omap-cache.c	am33xx/omap: Allow cache enable for all Sitara/OMAP	2014-06-11 16:25:39 -04:00
pipe3-phy.c	ARM: OMAP5: Add Pipe3 PHY driver	2013-12-04 08:12:08 -05:00
pipe3-phy.h	ARM: OMAP5: Add Pipe3 PHY driver	2013-12-04 08:12:08 -05:00
reset.c	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
sata.c	ahci: mmio_base is a virtual address	2015-04-18 16:54:29 -04:00
timer.c	omap-common/hwinit-common.c: timer_init() doesn't need to touch gd	2015-01-05 15:13:45 -05:00
u-boot-spl.lds	arm: Add missing .vectors section to linker scripts	2014-08-30 07:46:41 -04:00
utils.c	ARM: DRA7: Set serial number environment variable	2015-04-23 13:59:19 -04:00
vc.c	ARM: OMAP4+: pmic: Make generic bus init and write functions	2013-06-10 08:43:09 -04:00