mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 19:10:13 +00:00
c95b0297e9
There are 4 registers (PERIPHID{0-3}) that contain the ID of MCI. For MMCs' with peripheral id 0x02041180 and 0x03041180, H/W flow control needs to be enabled for multi block writes (MMC CMD 18). Signed-off-by: Usama Arif <usama.arif@arm.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
565 lines
14 KiB
C
565 lines
14 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* ARM PrimeCell MultiMedia Card Interface - PL180
|
|
*
|
|
* Copyright (C) ST-Ericsson SA 2010
|
|
*
|
|
* Author: Ulf Hansson <ulf.hansson@stericsson.com>
|
|
* Author: Martin Lundholm <martin.xa.lundholm@stericsson.com>
|
|
* Ported to drivers/mmc/ by: Matt Waddel <matt.waddel@linaro.org>
|
|
*/
|
|
|
|
/* #define DEBUG */
|
|
|
|
#include "common.h"
|
|
#include <clk.h>
|
|
#include <errno.h>
|
|
#include <log.h>
|
|
#include <malloc.h>
|
|
#include <mmc.h>
|
|
#include <dm/device_compat.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm-generic/gpio.h>
|
|
|
|
#include "arm_pl180_mmci.h"
|
|
#include <linux/delay.h>
|
|
|
|
#ifdef CONFIG_DM_MMC
|
|
#include <dm.h>
|
|
#define MMC_CLOCK_MAX 48000000
|
|
#define MMC_CLOCK_MIN 400000
|
|
|
|
struct arm_pl180_mmc_plat {
|
|
struct mmc_config cfg;
|
|
struct mmc mmc;
|
|
};
|
|
#endif
|
|
|
|
static int wait_for_command_end(struct mmc *dev, struct mmc_cmd *cmd)
|
|
{
|
|
u32 hoststatus, statusmask;
|
|
struct pl180_mmc_host *host = dev->priv;
|
|
|
|
statusmask = SDI_STA_CTIMEOUT | SDI_STA_CCRCFAIL;
|
|
if ((cmd->resp_type & MMC_RSP_PRESENT))
|
|
statusmask |= SDI_STA_CMDREND;
|
|
else
|
|
statusmask |= SDI_STA_CMDSENT;
|
|
|
|
do
|
|
hoststatus = readl(&host->base->status) & statusmask;
|
|
while (!hoststatus);
|
|
|
|
writel(statusmask, &host->base->status_clear);
|
|
if (hoststatus & SDI_STA_CTIMEOUT) {
|
|
debug("CMD%d time out\n", cmd->cmdidx);
|
|
return -ETIMEDOUT;
|
|
} else if ((hoststatus & SDI_STA_CCRCFAIL) &&
|
|
(cmd->resp_type & MMC_RSP_CRC)) {
|
|
printf("CMD%d CRC error\n", cmd->cmdidx);
|
|
return -EILSEQ;
|
|
}
|
|
|
|
if (cmd->resp_type & MMC_RSP_PRESENT) {
|
|
cmd->response[0] = readl(&host->base->response0);
|
|
cmd->response[1] = readl(&host->base->response1);
|
|
cmd->response[2] = readl(&host->base->response2);
|
|
cmd->response[3] = readl(&host->base->response3);
|
|
debug("CMD%d response[0]:0x%08X, response[1]:0x%08X, "
|
|
"response[2]:0x%08X, response[3]:0x%08X\n",
|
|
cmd->cmdidx, cmd->response[0], cmd->response[1],
|
|
cmd->response[2], cmd->response[3]);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* send command to the mmc card and wait for results */
|
|
static int do_command(struct mmc *dev, struct mmc_cmd *cmd)
|
|
{
|
|
int result;
|
|
u32 sdi_cmd = 0;
|
|
struct pl180_mmc_host *host = dev->priv;
|
|
|
|
sdi_cmd = ((cmd->cmdidx & SDI_CMD_CMDINDEX_MASK) | SDI_CMD_CPSMEN);
|
|
|
|
if (cmd->resp_type) {
|
|
sdi_cmd |= SDI_CMD_WAITRESP;
|
|
if (cmd->resp_type & MMC_RSP_136)
|
|
sdi_cmd |= SDI_CMD_LONGRESP;
|
|
}
|
|
|
|
writel((u32)cmd->cmdarg, &host->base->argument);
|
|
udelay(COMMAND_REG_DELAY);
|
|
writel(sdi_cmd, &host->base->command);
|
|
result = wait_for_command_end(dev, cmd);
|
|
|
|
/* After CMD2 set RCA to a none zero value. */
|
|
if ((result == 0) && (cmd->cmdidx == MMC_CMD_ALL_SEND_CID))
|
|
dev->rca = 10;
|
|
|
|
/* After CMD3 open drain is switched off and push pull is used. */
|
|
if ((result == 0) && (cmd->cmdidx == MMC_CMD_SET_RELATIVE_ADDR)) {
|
|
u32 sdi_pwr = readl(&host->base->power) & ~SDI_PWR_OPD;
|
|
writel(sdi_pwr, &host->base->power);
|
|
}
|
|
|
|
return result;
|
|
}
|
|
|
|
static int read_bytes(struct mmc *dev, u32 *dest, u32 blkcount, u32 blksize)
|
|
{
|
|
u32 *tempbuff = dest;
|
|
u64 xfercount = blkcount * blksize;
|
|
struct pl180_mmc_host *host = dev->priv;
|
|
u32 status, status_err;
|
|
|
|
debug("read_bytes: blkcount=%u blksize=%u\n", blkcount, blksize);
|
|
|
|
status = readl(&host->base->status);
|
|
status_err = status & (SDI_STA_DCRCFAIL | SDI_STA_DTIMEOUT |
|
|
SDI_STA_RXOVERR);
|
|
while ((!status_err) && (xfercount >= sizeof(u32))) {
|
|
if (status & SDI_STA_RXDAVL) {
|
|
*(tempbuff) = readl(&host->base->fifo);
|
|
tempbuff++;
|
|
xfercount -= sizeof(u32);
|
|
}
|
|
status = readl(&host->base->status);
|
|
status_err = status & (SDI_STA_DCRCFAIL | SDI_STA_DTIMEOUT |
|
|
SDI_STA_RXOVERR);
|
|
}
|
|
|
|
status_err = status &
|
|
(SDI_STA_DCRCFAIL | SDI_STA_DTIMEOUT | SDI_STA_DBCKEND |
|
|
SDI_STA_RXOVERR);
|
|
while (!status_err) {
|
|
status = readl(&host->base->status);
|
|
status_err = status &
|
|
(SDI_STA_DCRCFAIL | SDI_STA_DTIMEOUT | SDI_STA_DBCKEND |
|
|
SDI_STA_RXOVERR);
|
|
}
|
|
|
|
if (status & SDI_STA_DTIMEOUT) {
|
|
printf("Read data timed out, xfercount: %llu, status: 0x%08X\n",
|
|
xfercount, status);
|
|
return -ETIMEDOUT;
|
|
} else if (status & SDI_STA_DCRCFAIL) {
|
|
printf("Read data bytes CRC error: 0x%x\n", status);
|
|
return -EILSEQ;
|
|
} else if (status & SDI_STA_RXOVERR) {
|
|
printf("Read data RX overflow error\n");
|
|
return -EIO;
|
|
}
|
|
|
|
writel(SDI_ICR_MASK, &host->base->status_clear);
|
|
|
|
if (xfercount) {
|
|
printf("Read data error, xfercount: %llu\n", xfercount);
|
|
return -ENOBUFS;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int write_bytes(struct mmc *dev, u32 *src, u32 blkcount, u32 blksize)
|
|
{
|
|
u32 *tempbuff = src;
|
|
int i;
|
|
u64 xfercount = blkcount * blksize;
|
|
struct pl180_mmc_host *host = dev->priv;
|
|
u32 status, status_err;
|
|
|
|
debug("write_bytes: blkcount=%u blksize=%u\n", blkcount, blksize);
|
|
|
|
status = readl(&host->base->status);
|
|
status_err = status & (SDI_STA_DCRCFAIL | SDI_STA_DTIMEOUT);
|
|
while (!status_err && xfercount) {
|
|
if (status & SDI_STA_TXFIFOBW) {
|
|
if (xfercount >= SDI_FIFO_BURST_SIZE * sizeof(u32)) {
|
|
for (i = 0; i < SDI_FIFO_BURST_SIZE; i++)
|
|
writel(*(tempbuff + i),
|
|
&host->base->fifo);
|
|
tempbuff += SDI_FIFO_BURST_SIZE;
|
|
xfercount -= SDI_FIFO_BURST_SIZE * sizeof(u32);
|
|
} else {
|
|
while (xfercount >= sizeof(u32)) {
|
|
writel(*(tempbuff), &host->base->fifo);
|
|
tempbuff++;
|
|
xfercount -= sizeof(u32);
|
|
}
|
|
}
|
|
}
|
|
status = readl(&host->base->status);
|
|
status_err = status & (SDI_STA_DCRCFAIL | SDI_STA_DTIMEOUT);
|
|
}
|
|
|
|
status_err = status &
|
|
(SDI_STA_DCRCFAIL | SDI_STA_DTIMEOUT | SDI_STA_DBCKEND);
|
|
while (!status_err) {
|
|
status = readl(&host->base->status);
|
|
status_err = status &
|
|
(SDI_STA_DCRCFAIL | SDI_STA_DTIMEOUT | SDI_STA_DBCKEND);
|
|
}
|
|
|
|
if (status & SDI_STA_DTIMEOUT) {
|
|
printf("Write data timed out, xfercount:%llu,status:0x%08X\n",
|
|
xfercount, status);
|
|
return -ETIMEDOUT;
|
|
} else if (status & SDI_STA_DCRCFAIL) {
|
|
printf("Write data CRC error\n");
|
|
return -EILSEQ;
|
|
}
|
|
|
|
writel(SDI_ICR_MASK, &host->base->status_clear);
|
|
|
|
if (xfercount) {
|
|
printf("Write data error, xfercount:%llu", xfercount);
|
|
return -ENOBUFS;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int do_data_transfer(struct mmc *dev,
|
|
struct mmc_cmd *cmd,
|
|
struct mmc_data *data)
|
|
{
|
|
int error = -ETIMEDOUT;
|
|
struct pl180_mmc_host *host = dev->priv;
|
|
u32 blksz = 0;
|
|
u32 data_ctrl = 0;
|
|
u32 data_len = (u32) (data->blocks * data->blocksize);
|
|
|
|
if (!host->version2) {
|
|
blksz = (ffs(data->blocksize) - 1);
|
|
data_ctrl |= ((blksz << 4) & SDI_DCTRL_DBLKSIZE_MASK);
|
|
} else {
|
|
blksz = data->blocksize;
|
|
data_ctrl |= (blksz << SDI_DCTRL_DBLOCKSIZE_V2_SHIFT);
|
|
}
|
|
data_ctrl |= SDI_DCTRL_DTEN | SDI_DCTRL_BUSYMODE;
|
|
|
|
writel(SDI_DTIMER_DEFAULT, &host->base->datatimer);
|
|
writel(data_len, &host->base->datalength);
|
|
udelay(DATA_REG_DELAY);
|
|
|
|
if (data->flags & MMC_DATA_READ) {
|
|
data_ctrl |= SDI_DCTRL_DTDIR_IN;
|
|
writel(data_ctrl, &host->base->datactrl);
|
|
|
|
error = do_command(dev, cmd);
|
|
if (error)
|
|
return error;
|
|
|
|
error = read_bytes(dev, (u32 *)data->dest, (u32)data->blocks,
|
|
(u32)data->blocksize);
|
|
} else if (data->flags & MMC_DATA_WRITE) {
|
|
error = do_command(dev, cmd);
|
|
if (error)
|
|
return error;
|
|
|
|
writel(data_ctrl, &host->base->datactrl);
|
|
error = write_bytes(dev, (u32 *)data->src, (u32)data->blocks,
|
|
(u32)data->blocksize);
|
|
}
|
|
|
|
return error;
|
|
}
|
|
|
|
static int host_request(struct mmc *dev,
|
|
struct mmc_cmd *cmd,
|
|
struct mmc_data *data)
|
|
{
|
|
int result;
|
|
|
|
if (data)
|
|
result = do_data_transfer(dev, cmd, data);
|
|
else
|
|
result = do_command(dev, cmd);
|
|
|
|
return result;
|
|
}
|
|
|
|
static int check_peripheral_id(struct pl180_mmc_host *host, u32 periph_id)
|
|
{
|
|
return readl(&host->base->periph_id0) == (periph_id & 0xFF) &&
|
|
readl(&host->base->periph_id1) == ((periph_id >> 8) & 0xFF) &&
|
|
readl(&host->base->periph_id2) == ((periph_id >> 16) & 0xFF) &&
|
|
readl(&host->base->periph_id3) == ((periph_id >> 24) & 0xFF);
|
|
}
|
|
|
|
static int host_set_ios(struct mmc *dev)
|
|
{
|
|
struct pl180_mmc_host *host = dev->priv;
|
|
u32 sdi_clkcr;
|
|
|
|
sdi_clkcr = readl(&host->base->clock);
|
|
|
|
/* Ramp up the clock rate */
|
|
if (dev->clock) {
|
|
u32 clkdiv = 0;
|
|
u32 tmp_clock;
|
|
|
|
if (dev->clock >= dev->cfg->f_max) {
|
|
clkdiv = 0;
|
|
dev->clock = dev->cfg->f_max;
|
|
} else {
|
|
clkdiv = (host->clock_in / dev->clock) - 2;
|
|
}
|
|
|
|
tmp_clock = host->clock_in / (clkdiv + 2);
|
|
while (tmp_clock > dev->clock) {
|
|
clkdiv++;
|
|
tmp_clock = host->clock_in / (clkdiv + 2);
|
|
}
|
|
|
|
if (clkdiv > SDI_CLKCR_CLKDIV_MASK)
|
|
clkdiv = SDI_CLKCR_CLKDIV_MASK;
|
|
|
|
tmp_clock = host->clock_in / (clkdiv + 2);
|
|
dev->clock = tmp_clock;
|
|
sdi_clkcr &= ~(SDI_CLKCR_CLKDIV_MASK);
|
|
sdi_clkcr |= clkdiv;
|
|
}
|
|
|
|
/* Set the bus width */
|
|
if (dev->bus_width) {
|
|
u32 buswidth = 0;
|
|
|
|
switch (dev->bus_width) {
|
|
case 1:
|
|
buswidth |= SDI_CLKCR_WIDBUS_1;
|
|
break;
|
|
case 4:
|
|
buswidth |= SDI_CLKCR_WIDBUS_4;
|
|
break;
|
|
case 8:
|
|
buswidth |= SDI_CLKCR_WIDBUS_8;
|
|
break;
|
|
default:
|
|
printf("Invalid bus width: %d\n", dev->bus_width);
|
|
break;
|
|
}
|
|
sdi_clkcr &= ~(SDI_CLKCR_WIDBUS_MASK);
|
|
sdi_clkcr |= buswidth;
|
|
}
|
|
/* For MMCs' with peripheral id 0x02041180 and 0x03041180, H/W flow control
|
|
* needs to be enabled for multi block writes (MMC CMD 18).
|
|
*/
|
|
if (check_peripheral_id(host, 0x02041180) ||
|
|
check_peripheral_id(host, 0x03041180))
|
|
sdi_clkcr |= SDI_CLKCR_HWFCEN;
|
|
|
|
writel(sdi_clkcr, &host->base->clock);
|
|
udelay(CLK_CHANGE_DELAY);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifndef CONFIG_DM_MMC
|
|
/* MMC uses open drain drivers in the enumeration phase */
|
|
static int mmc_host_reset(struct mmc *dev)
|
|
{
|
|
struct pl180_mmc_host *host = dev->priv;
|
|
|
|
writel(host->pwr_init, &host->base->power);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct mmc_ops arm_pl180_mmci_ops = {
|
|
.send_cmd = host_request,
|
|
.set_ios = host_set_ios,
|
|
.init = mmc_host_reset,
|
|
};
|
|
|
|
/*
|
|
* mmc_host_init - initialize the mmc controller.
|
|
* Set initial clock and power for mmc slot.
|
|
* Initialize mmc struct and register with mmc framework.
|
|
*/
|
|
|
|
int arm_pl180_mmci_init(struct pl180_mmc_host *host, struct mmc **mmc)
|
|
{
|
|
u32 sdi_u32;
|
|
|
|
writel(host->pwr_init, &host->base->power);
|
|
writel(host->clkdiv_init, &host->base->clock);
|
|
udelay(CLK_CHANGE_DELAY);
|
|
|
|
/* Disable mmc interrupts */
|
|
sdi_u32 = readl(&host->base->mask0) & ~SDI_MASK0_MASK;
|
|
writel(sdi_u32, &host->base->mask0);
|
|
|
|
host->cfg.name = host->name;
|
|
host->cfg.ops = &arm_pl180_mmci_ops;
|
|
|
|
/* TODO remove the duplicates */
|
|
host->cfg.host_caps = host->caps;
|
|
host->cfg.voltages = host->voltages;
|
|
host->cfg.f_min = host->clock_min;
|
|
host->cfg.f_max = host->clock_max;
|
|
if (host->b_max != 0)
|
|
host->cfg.b_max = host->b_max;
|
|
else
|
|
host->cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
|
|
|
|
*mmc = mmc_create(&host->cfg, host);
|
|
if (!*mmc)
|
|
return -1;
|
|
debug("registered mmc interface number is:%d\n",
|
|
(*mmc)->block_dev.devnum);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_DM_MMC
|
|
static void arm_pl180_mmc_init(struct pl180_mmc_host *host)
|
|
{
|
|
u32 sdi_u32;
|
|
|
|
writel(host->pwr_init, &host->base->power);
|
|
writel(host->clkdiv_init, &host->base->clock);
|
|
udelay(CLK_CHANGE_DELAY);
|
|
|
|
/* Disable mmc interrupts */
|
|
sdi_u32 = readl(&host->base->mask0) & ~SDI_MASK0_MASK;
|
|
writel(sdi_u32, &host->base->mask0);
|
|
}
|
|
|
|
static int arm_pl180_mmc_probe(struct udevice *dev)
|
|
{
|
|
struct arm_pl180_mmc_plat *pdata = dev_get_plat(dev);
|
|
struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
|
|
struct mmc *mmc = &pdata->mmc;
|
|
struct pl180_mmc_host *host = dev_get_priv(dev);
|
|
struct mmc_config *cfg = &pdata->cfg;
|
|
struct clk clk;
|
|
u32 periphid;
|
|
int ret;
|
|
|
|
ret = clk_get_by_index(dev, 0, &clk);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = clk_enable(&clk);
|
|
if (ret) {
|
|
clk_free(&clk);
|
|
dev_err(dev, "failed to enable clock\n");
|
|
return ret;
|
|
}
|
|
|
|
host->pwr_init = INIT_PWR;
|
|
host->clkdiv_init = SDI_CLKCR_CLKDIV_INIT_V1 | SDI_CLKCR_CLKEN |
|
|
SDI_CLKCR_HWFC_EN;
|
|
host->clock_in = clk_get_rate(&clk);
|
|
|
|
cfg->name = dev->name;
|
|
cfg->voltages = VOLTAGE_WINDOW_SD;
|
|
cfg->host_caps = 0;
|
|
cfg->f_min = host->clock_in / (2 * (SDI_CLKCR_CLKDIV_INIT_V1 + 1));
|
|
cfg->f_max = MMC_CLOCK_MAX;
|
|
cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
|
|
|
|
periphid = dev_read_u32_default(dev, "arm,primecell-periphid", 0);
|
|
switch (periphid) {
|
|
case STM32_MMCI_ID: /* stm32 variant */
|
|
host->version2 = false;
|
|
break;
|
|
case UX500V2_MMCI_ID:
|
|
host->pwr_init = SDI_PWR_OPD | SDI_PWR_PWRCTRL_ON;
|
|
host->clkdiv_init = SDI_CLKCR_CLKDIV_INIT_V2 | SDI_CLKCR_CLKEN |
|
|
SDI_CLKCR_HWFC_EN;
|
|
cfg->voltages = VOLTAGE_WINDOW_MMC;
|
|
cfg->f_min = host->clock_in / (2 + SDI_CLKCR_CLKDIV_INIT_V2);
|
|
host->version2 = true;
|
|
break;
|
|
default:
|
|
host->version2 = true;
|
|
}
|
|
|
|
gpio_request_by_name(dev, "cd-gpios", 0, &host->cd_gpio, GPIOD_IS_IN);
|
|
|
|
ret = mmc_of_parse(dev, cfg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
arm_pl180_mmc_init(host);
|
|
mmc->priv = host;
|
|
mmc->dev = dev;
|
|
upriv->mmc = mmc;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int arm_pl180_mmc_bind(struct udevice *dev)
|
|
{
|
|
struct arm_pl180_mmc_plat *plat = dev_get_plat(dev);
|
|
|
|
return mmc_bind(dev, &plat->mmc, &plat->cfg);
|
|
}
|
|
|
|
static int dm_host_request(struct udevice *dev, struct mmc_cmd *cmd,
|
|
struct mmc_data *data)
|
|
{
|
|
struct mmc *mmc = mmc_get_mmc_dev(dev);
|
|
|
|
return host_request(mmc, cmd, data);
|
|
}
|
|
|
|
static int dm_host_set_ios(struct udevice *dev)
|
|
{
|
|
struct mmc *mmc = mmc_get_mmc_dev(dev);
|
|
|
|
return host_set_ios(mmc);
|
|
}
|
|
|
|
static int dm_mmc_getcd(struct udevice *dev)
|
|
{
|
|
struct pl180_mmc_host *host = dev_get_priv(dev);
|
|
int value = 1;
|
|
|
|
if (dm_gpio_is_valid(&host->cd_gpio))
|
|
value = dm_gpio_get_value(&host->cd_gpio);
|
|
|
|
return value;
|
|
}
|
|
|
|
static const struct dm_mmc_ops arm_pl180_dm_mmc_ops = {
|
|
.send_cmd = dm_host_request,
|
|
.set_ios = dm_host_set_ios,
|
|
.get_cd = dm_mmc_getcd,
|
|
};
|
|
|
|
static int arm_pl180_mmc_of_to_plat(struct udevice *dev)
|
|
{
|
|
struct pl180_mmc_host *host = dev_get_priv(dev);
|
|
|
|
host->base = dev_read_addr_ptr(dev);
|
|
if (!host->base)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id arm_pl180_mmc_match[] = {
|
|
{ .compatible = "arm,pl180" },
|
|
{ .compatible = "arm,pl18x" },
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(arm_pl180_mmc) = {
|
|
.name = "arm_pl180_mmc",
|
|
.id = UCLASS_MMC,
|
|
.of_match = arm_pl180_mmc_match,
|
|
.ops = &arm_pl180_dm_mmc_ops,
|
|
.probe = arm_pl180_mmc_probe,
|
|
.of_to_plat = arm_pl180_mmc_of_to_plat,
|
|
.bind = arm_pl180_mmc_bind,
|
|
.priv_auto = sizeof(struct pl180_mmc_host),
|
|
.plat_auto = sizeof(struct arm_pl180_mmc_plat),
|
|
};
|
|
#endif
|