Lokesh Vutla e850ed82bc ARM: OMAP4+: Allow arch specfic code to use early DM ... Early system initialization is being done before initf_dm is being called in U-Boot. Then system will fail to boot if any of the DM enabled driver is being called in this system initialization code. So, rearrange the code a bit so that DM enabled drivers can be called during early system initialization. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>		2016-03-14 19:18:48 -04:00
..
abb.c	replace DIV_ROUND with DIV_ROUND_CLOSEST	2014-11-20 11:28:25 -05:00
boot-common.c	omap3: Use raw SPL by default for mmc1	2016-03-08 15:01:46 -05:00
clocks-common.c	ARM: OMAP4/5: Centralize early clock initialization	2016-03-14 19:18:32 -04:00
emif-common.c	ARM: DRA7: emif: Enable interleaving for higher address space	2016-03-14 19:18:47 -04:00
hwinit-common.c	ARM: OMAP4+: Allow arch specfic code to use early DM	2016-03-14 19:18:48 -04:00
lowlevel_init.S	omap-common: Common boot code OMAP3 support and cleanup	2015-07-27 15:02:03 -04:00
Makefile	arm: omap-common: do not build timer when CONFIG_TIMER defined	2016-01-20 19:06:21 -07:00
mem-common.c	ARM: omap: clean redundant PISMO_xx macros used in OMAP3	2014-07-25 16:26:12 -04:00
omap-cache.c	am33xx/omap: Allow cache enable for all Sitara/OMAP	2014-06-11 16:25:39 -04:00
pipe3-phy.c	ARM: OMAP5: Add Pipe3 PHY driver	2013-12-04 08:12:08 -05:00
pipe3-phy.h	ARM: OMAP5: Add Pipe3 PHY driver	2013-12-04 08:12:08 -05:00
reset.c	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
sata.c	ahci: mmio_base is a virtual address	2015-04-18 16:54:29 -04:00
timer.c	omap-common/hwinit-common.c: timer_init() doesn't need to touch gd	2015-01-05 15:13:45 -05:00
u-boot-spl.lds	arm: Add missing .vectors section to linker scripts	2014-08-30 07:46:41 -04:00
utils.c	armv7: Add missing newline after OMAP die ID	2016-01-20 10:19:38 -05:00
vc.c	ARM: OMAP4+: pmic: Make generic bus init and write functions	2013-06-10 08:43:09 -04:00