u-boot/drivers/video/pxa_lcd.c
Tom Rini d1240b6ab2 global: Remove dead code that starts with CONFIG_[0-9A]
This removes a number of spots of dead code based on symbols that start
with CONFIG_[0-9] or CONFIG_A.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-30 14:13:28 -04:00

549 lines
14 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* PXA LCD Controller
*
* (C) Copyright 2001-2002
* Wolfgang Denk, DENX Software Engineering -- wd@denx.de
*/
/************************************************************************/
/* ** HEADER FILES */
/************************************************************************/
#include <common.h>
#include <log.h>
#include <asm/arch/pxa-regs.h>
#include <asm/io.h>
#include <lcd.h>
#include <linux/types.h>
#include <stdarg.h>
#include <stdio_dev.h>
/* #define DEBUG */
#ifdef CONFIG_LCD
/*----------------------------------------------------------------------*/
/*
* Define panel bpp, LCCR0, LCCR3 and panel_info video struct for
* your display.
*/
#ifdef CONFIG_PXA_VGA
/* LCD outputs connected to a video DAC */
# define LCD_BPP LCD_COLOR8
/* you have to set lccr0 and lccr3 (including pcd) */
# define REG_LCCR0 0x003008f8
# define REG_LCCR3 0x0300FF01
/* 640x480x16 @ 61 Hz */
vidinfo_t panel_info = {
.vl_col = 640,
.vl_row = 480,
.vl_width = 640,
.vl_height = 480,
.vl_clkp = CONFIG_SYS_HIGH,
.vl_oep = CONFIG_SYS_HIGH,
.vl_hsp = CONFIG_SYS_HIGH,
.vl_vsp = CONFIG_SYS_HIGH,
.vl_dp = CONFIG_SYS_HIGH,
.vl_bpix = LCD_BPP,
.vl_lbw = 0,
.vl_splt = 0,
.vl_clor = 0,
.vl_tft = 1,
.vl_hpw = 40,
.vl_blw = 56,
.vl_elw = 56,
.vl_vpw = 20,
.vl_bfw = 8,
.vl_efw = 8,
};
#endif /* CONFIG_PXA_VIDEO */
/*----------------------------------------------------------------------*/
#ifdef CONFIG_SHARP_LM8V31
# define LCD_BPP LCD_COLOR8
# define LCD_INVERT_COLORS /* Needed for colors to be correct, but why? */
/* you have to set lccr0 and lccr3 (including pcd) */
# define REG_LCCR0 0x0030087C
# define REG_LCCR3 0x0340FF08
vidinfo_t panel_info = {
.vl_col = 640,
.vl_row = 480,
.vl_width = 157,
.vl_height = 118,
.vl_clkp = CONFIG_SYS_HIGH,
.vl_oep = CONFIG_SYS_HIGH,
.vl_hsp = CONFIG_SYS_HIGH,
.vl_vsp = CONFIG_SYS_HIGH,
.vl_dp = CONFIG_SYS_HIGH,
.vl_bpix = LCD_BPP,
.vl_lbw = 0,
.vl_splt = 1,
.vl_clor = 1,
.vl_tft = 0,
.vl_hpw = 1,
.vl_blw = 3,
.vl_elw = 3,
.vl_vpw = 1,
.vl_bfw = 0,
.vl_efw = 0,
};
#endif /* CONFIG_SHARP_LM8V31 */
/*----------------------------------------------------------------------*/
#ifdef CONFIG_VOIPAC_LCD
# define LCD_BPP LCD_COLOR8
# define LCD_INVERT_COLORS
/* you have to set lccr0 and lccr3 (including pcd) */
# define REG_LCCR0 0x043008f8
# define REG_LCCR3 0x0340FF08
vidinfo_t panel_info = {
.vl_col = 640,
.vl_row = 480,
.vl_width = 157,
.vl_height = 118,
.vl_clkp = CONFIG_SYS_HIGH,
.vl_oep = CONFIG_SYS_HIGH,
.vl_hsp = CONFIG_SYS_HIGH,
.vl_vsp = CONFIG_SYS_HIGH,
.vl_dp = CONFIG_SYS_HIGH,
.vl_bpix = LCD_BPP,
.vl_lbw = 0,
.vl_splt = 1,
.vl_clor = 1,
.vl_tft = 1,
.vl_hpw = 32,
.vl_blw = 144,
.vl_elw = 32,
.vl_vpw = 2,
.vl_bfw = 13,
.vl_efw = 30,
};
#endif /* CONFIG_VOIPAC_LCD */
/*----------------------------------------------------------------------*/
#ifdef CONFIG_HITACHI_SX14
/* Hitachi SX14Q004-ZZA color STN LCD */
#define LCD_BPP LCD_COLOR8
/* you have to set lccr0 and lccr3 (including pcd) */
#define REG_LCCR0 0x00301079
#define REG_LCCR3 0x0340FF20
vidinfo_t panel_info = {
.vl_col = 320,
.vl_row = 240,
.vl_width = 167,
.vl_height = 109,
.vl_clkp = CONFIG_SYS_HIGH,
.vl_oep = CONFIG_SYS_HIGH,
.vl_hsp = CONFIG_SYS_HIGH,
.vl_vsp = CONFIG_SYS_HIGH,
.vl_dp = CONFIG_SYS_HIGH,
.vl_bpix = LCD_BPP,
.vl_lbw = 1,
.vl_splt = 0,
.vl_clor = 1,
.vl_tft = 0,
.vl_hpw = 1,
.vl_blw = 1,
.vl_elw = 1,
.vl_vpw = 7,
.vl_bfw = 0,
.vl_efw = 0,
};
#endif /* CONFIG_HITACHI_SX14 */
/*----------------------------------------------------------------------*/
#ifdef CONFIG_LMS283GF05
# define LCD_BPP LCD_COLOR8
/*# define LCD_INVERT_COLORS*/
/* you have to set lccr0 and lccr3 (including pcd) */
# define REG_LCCR0 0x043008f8
# define REG_LCCR3 0x03b00009
vidinfo_t panel_info = {
.vl_col = 240,
.vl_row = 320,
.vl_rot = 3,
.vl_width = 240,
.vl_height = 320,
.vl_clkp = CONFIG_SYS_HIGH,
.vl_oep = CONFIG_SYS_LOW,
.vl_hsp = CONFIG_SYS_LOW,
.vl_vsp = CONFIG_SYS_LOW,
.vl_dp = CONFIG_SYS_HIGH,
.vl_bpix = LCD_BPP,
.vl_lbw = 0,
.vl_splt = 1,
.vl_clor = 1,
.vl_tft = 1,
.vl_hpw = 4,
.vl_blw = 4,
.vl_elw = 8,
.vl_vpw = 4,
.vl_bfw = 4,
.vl_efw = 8,
};
#endif /* CONFIG_LMS283GF05 */
/*----------------------------------------------------------------------*/
#ifdef CONFIG_LQ038J7DH53
# define LCD_BPP LCD_COLOR8
/* you have to set lccr0 and lccr3 (including pcd) */
# define REG_LCCR0 0x003008f9
# define REG_LCCR3 0x03700004
vidinfo_t panel_info = {
.vl_col = 320,
.vl_row = 480,
.vl_width = 320,
.vl_height = 480,
.vl_clkp = CONFIG_SYS_HIGH,
.vl_oep = CONFIG_SYS_LOW,
.vl_hsp = CONFIG_SYS_LOW,
.vl_vsp = CONFIG_SYS_LOW,
.vl_dp = CONFIG_SYS_HIGH,
.vl_bpix = LCD_BPP,
.vl_lbw = 0,
.vl_splt = 1,
.vl_clor = 1,
.vl_tft = 1,
.vl_hpw = 0x04,
.vl_blw = 0x20,
.vl_elw = 0x01,
.vl_vpw = 0x01,
.vl_bfw = 0x04,
.vl_efw = 0x01,
};
#endif /* CONFIG_LQ038J7DH53 */
/*----------------------------------------------------------------------*/
#ifdef CONFIG_LITTLETON_LCD
# define LCD_BPP LCD_COLOR8
/* you have to set lccr0 and lccr3 (including pcd) */
# define REG_LCCR0 0x003008f8
# define REG_LCCR3 0x0300FF04
vidinfo_t panel_info = {
.vl_col = 480,
.vl_row = 640,
.vl_width = 480,
.vl_height = 640,
.vl_clkp = CONFIG_SYS_HIGH,
.vl_oep = CONFIG_SYS_HIGH,
.vl_hsp = CONFIG_SYS_HIGH,
.vl_vsp = CONFIG_SYS_HIGH,
.vl_dp = CONFIG_SYS_HIGH,
.vl_bpix = LCD_BPP,
.vl_lbw = 0,
.vl_splt = 0,
.vl_clor = 0,
.vl_tft = 1,
.vl_hpw = 9,
.vl_blw = 8,
.vl_elw = 24,
.vl_vpw = 2,
.vl_bfw = 2,
.vl_efw = 4,
};
#endif /* CONFIG_LITTLETON_LCD */
/*----------------------------------------------------------------------*/
static int pxafb_init_mem (void *lcdbase, vidinfo_t *vid);
static void pxafb_setup_gpio (vidinfo_t *vid);
static void pxafb_enable_controller (vidinfo_t *vid);
static int pxafb_init (vidinfo_t *vid);
/************************************************************************/
/* --------------- PXA chipset specific functions ------------------- */
/************************************************************************/
ushort *configuration_get_cmap(void)
{
struct pxafb_info *fbi = &panel_info.pxa;
return (ushort *)fbi->palette;
}
void lcd_ctrl_init (void *lcdbase)
{
pxafb_init_mem(lcdbase, &panel_info);
pxafb_init(&panel_info);
pxafb_setup_gpio(&panel_info);
pxafb_enable_controller(&panel_info);
}
/*----------------------------------------------------------------------*/
#if LCD_BPP == LCD_COLOR8
void
lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue)
{
struct pxafb_info *fbi = &panel_info.pxa;
unsigned short *palette = (unsigned short *)fbi->palette;
u_int val;
if (regno < fbi->palette_size) {
val = ((red << 8) & 0xf800);
val |= ((green << 4) & 0x07e0);
val |= (blue & 0x001f);
#ifdef LCD_INVERT_COLORS
palette[regno] = ~val;
#else
palette[regno] = val;
#endif
}
debug ("setcolreg: reg %2d @ %p: R=%02X G=%02X B=%02X => %04X\n",
regno, &palette[regno],
red, green, blue,
palette[regno]);
}
#endif /* LCD_COLOR8 */
/*----------------------------------------------------------------------*/
__weak void lcd_enable(void)
{
}
/************************************************************************/
/* ** PXA255 specific routines */
/************************************************************************/
/*
* Calculate fb size for VIDEOLFB_ATAG. Size returned contains fb,
* descriptors and palette areas.
*/
ulong calc_fbsize (void)
{
ulong size;
int line_length = (panel_info.vl_col * NBITS (panel_info.vl_bpix)) / 8;
size = line_length * panel_info.vl_row;
size += PAGE_SIZE;
return size;
}
static int pxafb_init_mem (void *lcdbase, vidinfo_t *vid)
{
u_long palette_mem_size;
struct pxafb_info *fbi = &vid->pxa;
int fb_size = vid->vl_row * (vid->vl_col * NBITS (vid->vl_bpix)) / 8;
fbi->screen = (u_long)lcdbase;
fbi->palette_size = NBITS(vid->vl_bpix) == 8 ? 256 : 16;
palette_mem_size = fbi->palette_size * sizeof(u16);
debug("palette_mem_size = 0x%08lx\n", (u_long) palette_mem_size);
/* locate palette and descs at end of page following fb */
fbi->palette = (u_long)lcdbase + fb_size + PAGE_SIZE - palette_mem_size;
return 0;
}
#ifdef CONFIG_CPU_MONAHANS
static inline void pxafb_setup_gpio (vidinfo_t *vid) {}
#else
static void pxafb_setup_gpio (vidinfo_t *vid)
{
u_long lccr0;
/*
* setup is based on type of panel supported
*/
lccr0 = vid->pxa.reg_lccr0;
/* 4 bit interface */
if ((lccr0 & LCCR0_CMS) && (lccr0 & LCCR0_SDS) && !(lccr0 & LCCR0_DPD))
{
debug("Setting GPIO for 4 bit data\n");
/* bits 58-61 */
writel(readl(GPDR1) | (0xf << 26), GPDR1);
writel((readl(GAFR1_U) & ~(0xff << 20)) | (0xaa << 20),
GAFR1_U);
/* bits 74-77 */
writel(readl(GPDR2) | (0xf << 10), GPDR2);
writel((readl(GAFR2_L) & ~(0xff << 20)) | (0xaa << 20),
GAFR2_L);
}
/* 8 bit interface */
else if (((lccr0 & LCCR0_CMS) && ((lccr0 & LCCR0_SDS) || (lccr0 & LCCR0_DPD))) ||
(!(lccr0 & LCCR0_CMS) && !(lccr0 & LCCR0_PAS) && !(lccr0 & LCCR0_SDS)))
{
debug("Setting GPIO for 8 bit data\n");
/* bits 58-65 */
writel(readl(GPDR1) | (0x3f << 26), GPDR1);
writel(readl(GPDR2) | (0x3), GPDR2);
writel((readl(GAFR1_U) & ~(0xfff << 20)) | (0xaaa << 20),
GAFR1_U);
writel((readl(GAFR2_L) & ~0xf) | (0xa), GAFR2_L);
/* bits 74-77 */
writel(readl(GPDR2) | (0xf << 10), GPDR2);
writel((readl(GAFR2_L) & ~(0xff << 20)) | (0xaa << 20),
GAFR2_L);
}
/* 16 bit interface */
else if (!(lccr0 & LCCR0_CMS) && ((lccr0 & LCCR0_SDS) || (lccr0 & LCCR0_PAS)))
{
debug("Setting GPIO for 16 bit data\n");
/* bits 58-77 */
writel(readl(GPDR1) | (0x3f << 26), GPDR1);
writel(readl(GPDR2) | 0x00003fff, GPDR2);
writel((readl(GAFR1_U) & ~(0xfff << 20)) | (0xaaa << 20),
GAFR1_U);
writel((readl(GAFR2_L) & 0xf0000000) | 0x0aaaaaaa, GAFR2_L);
}
else
{
printf("pxafb_setup_gpio: unable to determine bits per pixel\n");
}
}
#endif
static void pxafb_enable_controller (vidinfo_t *vid)
{
debug("Enabling LCD controller\n");
/* Sequence from 11.7.10 */
writel(vid->pxa.reg_lccr3, LCCR3);
writel(vid->pxa.reg_lccr2, LCCR2);
writel(vid->pxa.reg_lccr1, LCCR1);
writel(vid->pxa.reg_lccr0 & ~LCCR0_ENB, LCCR0);
writel(vid->pxa.fdadr0, FDADR0);
writel(vid->pxa.fdadr1, FDADR1);
writel(readl(LCCR0) | LCCR0_ENB, LCCR0);
#ifdef CONFIG_CPU_MONAHANS
writel(readl(CKENA) | CKENA_1_LCD, CKENA);
#else
writel(readl(CKEN) | CKEN16_LCD, CKEN);
#endif
debug("FDADR0 = 0x%08x\n", readl(FDADR0));
debug("FDADR1 = 0x%08x\n", readl(FDADR1));
debug("LCCR0 = 0x%08x\n", readl(LCCR0));
debug("LCCR1 = 0x%08x\n", readl(LCCR1));
debug("LCCR2 = 0x%08x\n", readl(LCCR2));
debug("LCCR3 = 0x%08x\n", readl(LCCR3));
}
static int pxafb_init (vidinfo_t *vid)
{
struct pxafb_info *fbi = &vid->pxa;
debug("Configuring PXA LCD\n");
fbi->reg_lccr0 = REG_LCCR0;
fbi->reg_lccr3 = REG_LCCR3;
debug("vid: vl_col=%d hslen=%d lm=%d rm=%d\n",
vid->vl_col, vid->vl_hpw,
vid->vl_blw, vid->vl_elw);
debug("vid: vl_row=%d vslen=%d um=%d bm=%d\n",
vid->vl_row, vid->vl_vpw,
vid->vl_bfw, vid->vl_efw);
fbi->reg_lccr1 =
LCCR1_DisWdth(vid->vl_col) +
LCCR1_HorSnchWdth(vid->vl_hpw) +
LCCR1_BegLnDel(vid->vl_blw) +
LCCR1_EndLnDel(vid->vl_elw);
fbi->reg_lccr2 =
LCCR2_DisHght(vid->vl_row) +
LCCR2_VrtSnchWdth(vid->vl_vpw) +
LCCR2_BegFrmDel(vid->vl_bfw) +
LCCR2_EndFrmDel(vid->vl_efw);
fbi->reg_lccr3 = REG_LCCR3 & ~(LCCR3_HSP | LCCR3_VSP);
fbi->reg_lccr3 |= (vid->vl_hsp ? LCCR3_HorSnchL : LCCR3_HorSnchH)
| (vid->vl_vsp ? LCCR3_VrtSnchL : LCCR3_VrtSnchH);
/* setup dma descriptors */
fbi->dmadesc_fblow = (struct pxafb_dma_descriptor *)((unsigned int)fbi->palette - 3*16);
fbi->dmadesc_fbhigh = (struct pxafb_dma_descriptor *)((unsigned int)fbi->palette - 2*16);
fbi->dmadesc_palette = (struct pxafb_dma_descriptor *)((unsigned int)fbi->palette - 1*16);
#define BYTES_PER_PANEL ((fbi->reg_lccr0 & LCCR0_SDS) ? \
(vid->vl_col * vid->vl_row * NBITS(vid->vl_bpix) / 8 / 2) : \
(vid->vl_col * vid->vl_row * NBITS(vid->vl_bpix) / 8))
/* populate descriptors */
fbi->dmadesc_fblow->fdadr = (u_long)fbi->dmadesc_fblow;
fbi->dmadesc_fblow->fsadr = fbi->screen + BYTES_PER_PANEL;
fbi->dmadesc_fblow->fidr = 0;
fbi->dmadesc_fblow->ldcmd = BYTES_PER_PANEL;
fbi->fdadr1 = (u_long)fbi->dmadesc_fblow; /* only used in dual-panel mode */
fbi->dmadesc_fbhigh->fsadr = fbi->screen;
fbi->dmadesc_fbhigh->fidr = 0;
fbi->dmadesc_fbhigh->ldcmd = BYTES_PER_PANEL;
fbi->dmadesc_palette->fsadr = fbi->palette;
fbi->dmadesc_palette->fidr = 0;
fbi->dmadesc_palette->ldcmd = (fbi->palette_size * 2) | LDCMD_PAL;
if( NBITS(vid->vl_bpix) < 12)
{
/* assume any mode with <12 bpp is palette driven */
fbi->dmadesc_palette->fdadr = (u_long)fbi->dmadesc_fbhigh;
fbi->dmadesc_fbhigh->fdadr = (u_long)fbi->dmadesc_palette;
/* flips back and forth between pal and fbhigh */
fbi->fdadr0 = (u_long)fbi->dmadesc_palette;
}
else
{
/* palette shouldn't be loaded in true-color mode */
fbi->dmadesc_fbhigh->fdadr = (u_long)fbi->dmadesc_fbhigh;
fbi->fdadr0 = (u_long)fbi->dmadesc_fbhigh; /* no pal just fbhigh */
}
debug("fbi->dmadesc_fblow = 0x%lx\n", (u_long)fbi->dmadesc_fblow);
debug("fbi->dmadesc_fbhigh = 0x%lx\n", (u_long)fbi->dmadesc_fbhigh);
debug("fbi->dmadesc_palette = 0x%lx\n", (u_long)fbi->dmadesc_palette);
debug("fbi->dmadesc_fblow->fdadr = 0x%lx\n", fbi->dmadesc_fblow->fdadr);
debug("fbi->dmadesc_fbhigh->fdadr = 0x%lx\n", fbi->dmadesc_fbhigh->fdadr);
debug("fbi->dmadesc_palette->fdadr = 0x%lx\n", fbi->dmadesc_palette->fdadr);
debug("fbi->dmadesc_fblow->fsadr = 0x%lx\n", fbi->dmadesc_fblow->fsadr);
debug("fbi->dmadesc_fbhigh->fsadr = 0x%lx\n", fbi->dmadesc_fbhigh->fsadr);
debug("fbi->dmadesc_palette->fsadr = 0x%lx\n", fbi->dmadesc_palette->fsadr);
debug("fbi->dmadesc_fblow->ldcmd = 0x%lx\n", fbi->dmadesc_fblow->ldcmd);
debug("fbi->dmadesc_fbhigh->ldcmd = 0x%lx\n", fbi->dmadesc_fbhigh->ldcmd);
debug("fbi->dmadesc_palette->ldcmd = 0x%lx\n", fbi->dmadesc_palette->ldcmd);
return 0;
}
/************************************************************************/
/************************************************************************/
#endif /* CONFIG_LCD */