mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-11 23:47:24 +00:00
aaf2dbc82b
Add Nuvoton NPCM BMC Flash Interface Unit(FIU) SPI master controller driver using SPI-MEM interface. The FIU supports single, dual or quad communication interface. The FIU controller driver provides flash access in UMA(User Mode Access) mode by using an indirect address/data mechanism. the dts node is followed upstream kernel dts name. Signed-off-by: Jim Liu <JJLIU0@nuvoton.com> Signed-off-by: Stanley Chu <yschu@nuvoton.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> [Jagan: fixed the Kconfig, Makefile order] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
387 lines
10 KiB
C
387 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (c) 2022 Nuvoton Technology Corp.
|
|
* NPCM Flash Interface Unit(FIU) SPI master controller driver.
|
|
*/
|
|
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <spi.h>
|
|
#include <spi-mem.h>
|
|
#include <linux/bitfield.h>
|
|
#include <linux/log2.h>
|
|
#include <linux/iopoll.h>
|
|
|
|
#define DW_SIZE 4
|
|
#define CHUNK_SIZE 16
|
|
#define XFER_TIMEOUT 1000000
|
|
|
|
/* FIU UMA Configuration Register (UMA_CFG) */
|
|
#define UMA_CFG_RDATSIZ_MASK GENMASK(28, 24)
|
|
#define UMA_CFG_DBSIZ_MASK GENMASK(23, 21)
|
|
#define UMA_CFG_WDATSIZ_MASK GENMASK(20, 16)
|
|
#define UMA_CFG_ADDSIZ_MASK GENMASK(13, 11)
|
|
#define UMA_CFG_RDBPCK_MASK GENMASK(9, 8)
|
|
#define UMA_CFG_DBPCK_MASK GENMASK(7, 6)
|
|
#define UMA_CFG_WDBPCK_MASK GENMASK(5, 4)
|
|
#define UMA_CFG_ADBPCK_MASK GENMASK(3, 2)
|
|
#define UMA_CFG_CMBPCK_MASK GENMASK(1, 0)
|
|
#define UMA_CFG_CMDSIZ_SHIFT 10
|
|
|
|
/* FIU UMA Control and Status Register (UMA_CTS) */
|
|
#define UMA_CTS_SW_CS BIT(16)
|
|
#define UMA_CTS_EXEC_DONE BIT(0)
|
|
#define UMA_CTS_RDYST BIT(24)
|
|
#define UMA_CTS_DEV_NUM_MASK GENMASK(9, 8)
|
|
|
|
struct npcm_fiu_regs {
|
|
unsigned int drd_cfg;
|
|
unsigned int dwr_cfg;
|
|
unsigned int uma_cfg;
|
|
unsigned int uma_cts;
|
|
unsigned int uma_cmd;
|
|
unsigned int uma_addr;
|
|
unsigned int prt_cfg;
|
|
unsigned char res1[4];
|
|
unsigned int uma_dw0;
|
|
unsigned int uma_dw1;
|
|
unsigned int uma_dw2;
|
|
unsigned int uma_dw3;
|
|
unsigned int uma_dr0;
|
|
unsigned int uma_dr1;
|
|
unsigned int uma_dr2;
|
|
unsigned int uma_dr3;
|
|
unsigned int prt_cmd0;
|
|
unsigned int prt_cmd1;
|
|
unsigned int prt_cmd2;
|
|
unsigned int prt_cmd3;
|
|
unsigned int prt_cmd4;
|
|
unsigned int prt_cmd5;
|
|
unsigned int prt_cmd6;
|
|
unsigned int prt_cmd7;
|
|
unsigned int prt_cmd8;
|
|
unsigned int prt_cmd9;
|
|
unsigned int stuff[4];
|
|
unsigned int fiu_cfg;
|
|
};
|
|
|
|
struct npcm_fiu_priv {
|
|
struct npcm_fiu_regs *regs;
|
|
struct clk clk;
|
|
};
|
|
|
|
static int npcm_fiu_spi_set_speed(struct udevice *bus, uint speed)
|
|
{
|
|
struct npcm_fiu_priv *priv = dev_get_priv(bus);
|
|
int ret;
|
|
|
|
debug("%s: set speed %u\n", bus->name, speed);
|
|
ret = clk_set_rate(&priv->clk, speed);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int npcm_fiu_spi_set_mode(struct udevice *bus, uint mode)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline void activate_cs(struct npcm_fiu_regs *regs, int cs)
|
|
{
|
|
writel(FIELD_PREP(UMA_CTS_DEV_NUM_MASK, cs), ®s->uma_cts);
|
|
}
|
|
|
|
static inline void deactivate_cs(struct npcm_fiu_regs *regs, int cs)
|
|
{
|
|
writel(FIELD_PREP(UMA_CTS_DEV_NUM_MASK, cs) | UMA_CTS_SW_CS, ®s->uma_cts);
|
|
}
|
|
|
|
static int fiu_uma_read(struct udevice *bus, u8 *buf, u32 size)
|
|
{
|
|
struct npcm_fiu_priv *priv = dev_get_priv(bus);
|
|
struct npcm_fiu_regs *regs = priv->regs;
|
|
u32 data_reg[4];
|
|
u32 val;
|
|
int ret;
|
|
|
|
/* Set data size */
|
|
writel(FIELD_PREP(UMA_CFG_RDATSIZ_MASK, size), ®s->uma_cfg);
|
|
|
|
/* Initiate the read */
|
|
writel(readl(®s->uma_cts) | UMA_CTS_EXEC_DONE, ®s->uma_cts);
|
|
|
|
/* Wait for completion */
|
|
ret = readl_poll_timeout(®s->uma_cts, val,
|
|
!(val & UMA_CTS_EXEC_DONE), XFER_TIMEOUT);
|
|
if (ret) {
|
|
printf("npcm_fiu: read timeout\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Copy data from data registers */
|
|
if (size)
|
|
data_reg[0] = readl(®s->uma_dr0);
|
|
if (size > DW_SIZE)
|
|
data_reg[1] = readl(®s->uma_dr1);
|
|
if (size > DW_SIZE * 2)
|
|
data_reg[2] = readl(®s->uma_dr2);
|
|
if (size > DW_SIZE * 3)
|
|
data_reg[3] = readl(®s->uma_dr3);
|
|
memcpy(buf, data_reg, size);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fiu_uma_write(struct udevice *bus, const u8 *buf, u32 size)
|
|
{
|
|
struct npcm_fiu_priv *priv = dev_get_priv(bus);
|
|
struct npcm_fiu_regs *regs = priv->regs;
|
|
u32 data_reg[4];
|
|
u32 val;
|
|
int ret;
|
|
|
|
/* Set data size */
|
|
writel(FIELD_PREP(UMA_CFG_WDATSIZ_MASK, size), ®s->uma_cfg);
|
|
|
|
/* Write data to data registers */
|
|
memcpy(data_reg, buf, size);
|
|
if (size)
|
|
writel(data_reg[0], ®s->uma_dw0);
|
|
if (size > DW_SIZE)
|
|
writel(data_reg[1], ®s->uma_dw1);
|
|
if (size > DW_SIZE * 2)
|
|
writel(data_reg[2], ®s->uma_dw2);
|
|
if (size > DW_SIZE * 3)
|
|
writel(data_reg[3], ®s->uma_dw3);
|
|
|
|
/* Initiate the transaction */
|
|
writel(readl(®s->uma_cts) | UMA_CTS_EXEC_DONE, ®s->uma_cts);
|
|
|
|
/* Wait for completion */
|
|
ret = readl_poll_timeout(®s->uma_cts, val,
|
|
!(val & UMA_CTS_EXEC_DONE), XFER_TIMEOUT);
|
|
if (ret)
|
|
printf("npcm_fiu: write timeout\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int npcm_fiu_spi_xfer(struct udevice *dev, unsigned int bitlen,
|
|
const void *dout, void *din, unsigned long flags)
|
|
{
|
|
struct udevice *bus = dev->parent;
|
|
struct npcm_fiu_priv *priv = dev_get_priv(bus);
|
|
struct npcm_fiu_regs *regs = priv->regs;
|
|
struct dm_spi_slave_plat *slave_plat =
|
|
dev_get_parent_plat(dev);
|
|
const u8 *tx = dout;
|
|
u8 *rx = din;
|
|
int bytes = bitlen / 8;
|
|
int ret = 0;
|
|
int len;
|
|
|
|
if (flags & SPI_XFER_BEGIN)
|
|
activate_cs(regs, slave_plat->cs);
|
|
|
|
while (bytes) {
|
|
len = (bytes > CHUNK_SIZE) ? CHUNK_SIZE : bytes;
|
|
if (tx) {
|
|
ret = fiu_uma_write(bus, tx, len);
|
|
if (ret)
|
|
break;
|
|
tx += len;
|
|
} else {
|
|
ret = fiu_uma_read(bus, rx, len);
|
|
if (ret)
|
|
break;
|
|
rx += len;
|
|
}
|
|
bytes -= len;
|
|
}
|
|
|
|
if (flags & SPI_XFER_END)
|
|
deactivate_cs(regs, slave_plat->cs);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int npcm_fiu_uma_operation(struct npcm_fiu_priv *priv, const struct spi_mem_op *op,
|
|
u32 addr, const u8 *tx, u8 *rx, u32 nbytes, bool started)
|
|
{
|
|
struct npcm_fiu_regs *regs = priv->regs;
|
|
u32 uma_cfg = 0, val;
|
|
u32 data_reg[4];
|
|
int ret;
|
|
|
|
debug("fiu_uma: opcode 0x%x, dir %d, addr 0x%x, %d bytes\n",
|
|
op->cmd.opcode, op->data.dir, addr, nbytes);
|
|
debug(" buswidth cmd:%d, addr:%d, dummy:%d, data:%d\n",
|
|
op->cmd.buswidth, op->addr.buswidth, op->dummy.buswidth,
|
|
op->data.buswidth);
|
|
debug(" size cmd:%d, addr:%d, dummy:%d, data:%d\n",
|
|
1, op->addr.nbytes, op->dummy.nbytes, op->data.nbytes);
|
|
debug(" tx %p, rx %p\n", tx, rx);
|
|
|
|
if (!started) {
|
|
/* Send cmd/addr in the begin of an transaction */
|
|
writel(op->cmd.opcode, ®s->uma_cmd);
|
|
|
|
uma_cfg |= FIELD_PREP(UMA_CFG_CMBPCK_MASK, ilog2(op->cmd.buswidth)) |
|
|
(1 << UMA_CFG_CMDSIZ_SHIFT);
|
|
/* Configure addr bytes */
|
|
if (op->addr.nbytes) {
|
|
uma_cfg |= FIELD_PREP(UMA_CFG_ADBPCK_MASK, ilog2(op->addr.buswidth)) |
|
|
FIELD_PREP(UMA_CFG_ADDSIZ_MASK, op->addr.nbytes);
|
|
writel(addr, ®s->uma_addr);
|
|
}
|
|
/* Configure dummy bytes */
|
|
if (op->dummy.nbytes)
|
|
uma_cfg |= FIELD_PREP(UMA_CFG_DBPCK_MASK, ilog2(op->dummy.buswidth)) |
|
|
FIELD_PREP(UMA_CFG_DBSIZ_MASK, op->dummy.nbytes);
|
|
}
|
|
/* Set data bus width and data size */
|
|
if (op->data.dir == SPI_MEM_DATA_IN && nbytes)
|
|
uma_cfg |= FIELD_PREP(UMA_CFG_RDBPCK_MASK, ilog2(op->data.buswidth)) |
|
|
FIELD_PREP(UMA_CFG_RDATSIZ_MASK, nbytes);
|
|
else if (op->data.dir == SPI_MEM_DATA_OUT && nbytes)
|
|
uma_cfg |= FIELD_PREP(UMA_CFG_WDBPCK_MASK, ilog2(op->data.buswidth)) |
|
|
FIELD_PREP(UMA_CFG_WDATSIZ_MASK, nbytes);
|
|
writel(uma_cfg, ®s->uma_cfg);
|
|
|
|
if (op->data.dir == SPI_MEM_DATA_OUT && nbytes) {
|
|
memcpy(data_reg, tx, nbytes);
|
|
|
|
if (nbytes)
|
|
writel(data_reg[0], ®s->uma_dw0);
|
|
if (nbytes > DW_SIZE)
|
|
writel(data_reg[1], ®s->uma_dw1);
|
|
if (nbytes > DW_SIZE * 2)
|
|
writel(data_reg[2], ®s->uma_dw2);
|
|
if (nbytes > DW_SIZE * 3)
|
|
writel(data_reg[3], ®s->uma_dw3);
|
|
}
|
|
/* Initiate the transaction */
|
|
writel(readl(®s->uma_cts) | UMA_CTS_EXEC_DONE, ®s->uma_cts);
|
|
|
|
/* Wait for completion */
|
|
ret = readl_poll_timeout(®s->uma_cts, val,
|
|
!(val & UMA_CTS_EXEC_DONE), XFER_TIMEOUT);
|
|
if (ret) {
|
|
printf("npcm_fiu: UMA op timeout\n");
|
|
return ret;
|
|
}
|
|
|
|
if (op->data.dir == SPI_MEM_DATA_IN && nbytes) {
|
|
if (nbytes)
|
|
data_reg[0] = readl(®s->uma_dr0);
|
|
if (nbytes > DW_SIZE)
|
|
data_reg[1] = readl(®s->uma_dr1);
|
|
if (nbytes > DW_SIZE * 2)
|
|
data_reg[2] = readl(®s->uma_dr2);
|
|
if (nbytes > DW_SIZE * 3)
|
|
data_reg[3] = readl(®s->uma_dr3);
|
|
|
|
memcpy(rx, data_reg, nbytes);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int npcm_fiu_exec_op(struct spi_slave *slave,
|
|
const struct spi_mem_op *op)
|
|
{
|
|
struct udevice *bus = slave->dev->parent;
|
|
struct npcm_fiu_priv *priv = dev_get_priv(bus);
|
|
struct npcm_fiu_regs *regs = priv->regs;
|
|
struct dm_spi_slave_plat *slave_plat = dev_get_parent_plat(slave->dev);
|
|
u32 bytes, len, addr;
|
|
const u8 *tx;
|
|
u8 *rx;
|
|
bool started = false;
|
|
int ret;
|
|
|
|
bytes = op->data.nbytes;
|
|
addr = (u32)op->addr.val;
|
|
if (!bytes) {
|
|
activate_cs(regs, slave_plat->cs);
|
|
ret = npcm_fiu_uma_operation(priv, op, addr, NULL, NULL, 0, false);
|
|
deactivate_cs(regs, slave_plat->cs);
|
|
return ret;
|
|
}
|
|
|
|
tx = op->data.buf.out;
|
|
rx = op->data.buf.in;
|
|
/*
|
|
* Use SW-control CS for write to extend the transaction and
|
|
* keep the Write Enable state.
|
|
* Use HW-control CS for read to avoid clock and timing issues.
|
|
*/
|
|
if (op->data.dir == SPI_MEM_DATA_OUT)
|
|
activate_cs(regs, slave_plat->cs);
|
|
else
|
|
writel(FIELD_PREP(UMA_CTS_DEV_NUM_MASK, slave_plat->cs) | UMA_CTS_SW_CS,
|
|
®s->uma_cts);
|
|
while (bytes) {
|
|
len = (bytes > CHUNK_SIZE) ? CHUNK_SIZE : bytes;
|
|
ret = npcm_fiu_uma_operation(priv, op, addr, tx, rx, len, started);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* CS is kept low for uma write, extend the transaction */
|
|
if (op->data.dir == SPI_MEM_DATA_OUT)
|
|
started = true;
|
|
|
|
bytes -= len;
|
|
addr += len;
|
|
if (tx)
|
|
tx += len;
|
|
if (rx)
|
|
rx += len;
|
|
}
|
|
if (op->data.dir == SPI_MEM_DATA_OUT)
|
|
deactivate_cs(regs, slave_plat->cs);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int npcm_fiu_spi_probe(struct udevice *bus)
|
|
{
|
|
struct npcm_fiu_priv *priv = dev_get_priv(bus);
|
|
int ret;
|
|
|
|
priv->regs = (struct npcm_fiu_regs *)dev_read_addr_ptr(bus);
|
|
|
|
ret = clk_get_by_index(bus, 0, &priv->clk);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct spi_controller_mem_ops npcm_fiu_mem_ops = {
|
|
.exec_op = npcm_fiu_exec_op,
|
|
};
|
|
|
|
static const struct dm_spi_ops npcm_fiu_spi_ops = {
|
|
.xfer = npcm_fiu_spi_xfer,
|
|
.set_speed = npcm_fiu_spi_set_speed,
|
|
.set_mode = npcm_fiu_spi_set_mode,
|
|
.mem_ops = &npcm_fiu_mem_ops,
|
|
};
|
|
|
|
static const struct udevice_id npcm_fiu_spi_ids[] = {
|
|
{ .compatible = "nuvoton,npcm845-fiu" },
|
|
{ .compatible = "nuvoton,npcm750-fiu" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(npcm_fiu_spi) = {
|
|
.name = "npcm_fiu_spi",
|
|
.id = UCLASS_SPI,
|
|
.of_match = npcm_fiu_spi_ids,
|
|
.ops = &npcm_fiu_spi_ops,
|
|
.priv_auto = sizeof(struct npcm_fiu_priv),
|
|
.probe = npcm_fiu_spi_probe,
|
|
};
|