u-boot/drivers/mtd/nand/fsl_upm.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

184 lines
4.3 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* FSL UPM NAND driver
*
* Copyright (C) 2007 MontaVista Software, Inc.
* Anton Vorontsov <avorontsov@ru.mvista.com>
*/
#include <config.h>
#include <common.h>
#include <asm/io.h>
#include <linux/errno.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/fsl_upm.h>
#include <nand.h>
static void fsl_upm_start_pattern(struct fsl_upm *upm, u32 pat_offset)
{
clrsetbits_be32(upm->mxmr, MxMR_MAD_MSK, MxMR_OP_RUNP | pat_offset);
(void)in_be32(upm->mxmr);
}
static void fsl_upm_end_pattern(struct fsl_upm *upm)
{
clrbits_be32(upm->mxmr, MxMR_OP_RUNP);
while (in_be32(upm->mxmr) & MxMR_OP_RUNP)
eieio();
}
static void fsl_upm_run_pattern(struct fsl_upm *upm, int width,
void __iomem *io_addr, u32 mar)
{
out_be32(upm->mar, mar);
(void)in_be32(upm->mar);
switch (width) {
case 8:
out_8(io_addr, 0x0);
break;
case 16:
out_be16(io_addr, 0x0);
break;
case 32:
out_be32(io_addr, 0x0);
break;
}
}
static void fun_wait(struct fsl_upm_nand *fun)
{
if (fun->dev_ready) {
while (!fun->dev_ready(fun->chip_nr))
debug("unexpected busy state\n");
} else {
/*
* If the R/B pin is not connected,
* a short delay is necessary.
*/
udelay(1);
}
}
#if CONFIG_SYS_NAND_MAX_CHIPS > 1
static void fun_select_chip(struct mtd_info *mtd, int chip_nr)
{
struct nand_chip *chip = mtd_to_nand(mtd);
struct fsl_upm_nand *fun = nand_get_controller_data(chip);
if (chip_nr >= 0) {
fun->chip_nr = chip_nr;
chip->IO_ADDR_R = chip->IO_ADDR_W =
fun->upm.io_addr + fun->chip_offset * chip_nr;
} else if (chip_nr == -1) {
chip->cmd_ctrl(mtd, NAND_CMD_NONE, 0 | NAND_CTRL_CHANGE);
}
}
#endif
static void fun_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
struct nand_chip *chip = mtd_to_nand(mtd);
struct fsl_upm_nand *fun = nand_get_controller_data(chip);
void __iomem *io_addr;
u32 mar;
if (!(ctrl & fun->last_ctrl)) {
fsl_upm_end_pattern(&fun->upm);
if (cmd == NAND_CMD_NONE)
return;
fun->last_ctrl = ctrl & (NAND_ALE | NAND_CLE);
}
if (ctrl & NAND_CTRL_CHANGE) {
if (ctrl & NAND_ALE)
fsl_upm_start_pattern(&fun->upm, fun->upm_addr_offset);
else if (ctrl & NAND_CLE)
fsl_upm_start_pattern(&fun->upm, fun->upm_cmd_offset);
}
mar = cmd << (32 - fun->width);
io_addr = fun->upm.io_addr;
#if CONFIG_SYS_NAND_MAX_CHIPS > 1
if (fun->chip_nr > 0) {
io_addr += fun->chip_offset * fun->chip_nr;
if (fun->upm_mar_chip_offset)
mar |= fun->upm_mar_chip_offset * fun->chip_nr;
}
#endif
fsl_upm_run_pattern(&fun->upm, fun->width, io_addr, mar);
/*
* Some boards/chips needs this. At least the MPC8360E-RDK
* needs it. Probably weird chip, because I don't see any
* need for this on MPC8555E + Samsung K9F1G08U0A. Usually
* here are 0-2 unexpected busy states per block read.
*/
if (fun->wait_flags & FSL_UPM_WAIT_RUN_PATTERN)
fun_wait(fun);
}
static u8 upm_nand_read_byte(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd_to_nand(mtd);
return in_8(chip->IO_ADDR_R);
}
static void upm_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
int i;
struct nand_chip *chip = mtd_to_nand(mtd);
struct fsl_upm_nand *fun = nand_get_controller_data(chip);
for (i = 0; i < len; i++) {
out_8(chip->IO_ADDR_W, buf[i]);
if (fun->wait_flags & FSL_UPM_WAIT_WRITE_BYTE)
fun_wait(fun);
}
if (fun->wait_flags & FSL_UPM_WAIT_WRITE_BUFFER)
fun_wait(fun);
}
static void upm_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
{
int i;
struct nand_chip *chip = mtd_to_nand(mtd);
for (i = 0; i < len; i++)
buf[i] = in_8(chip->IO_ADDR_R);
}
static int nand_dev_ready(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd_to_nand(mtd);
struct fsl_upm_nand *fun = nand_get_controller_data(chip);
return fun->dev_ready(fun->chip_nr);
}
int fsl_upm_nand_init(struct nand_chip *chip, struct fsl_upm_nand *fun)
{
if (fun->width != 8 && fun->width != 16 && fun->width != 32)
return -ENOSYS;
fun->last_ctrl = NAND_CLE;
nand_set_controller_data(chip, fun);
chip->chip_delay = fun->chip_delay;
chip->ecc.mode = NAND_ECC_SOFT;
chip->cmd_ctrl = fun_cmd_ctrl;
#if CONFIG_SYS_NAND_MAX_CHIPS > 1
chip->select_chip = fun_select_chip;
#endif
chip->read_byte = upm_nand_read_byte;
chip->read_buf = upm_nand_read_buf;
chip->write_buf = upm_nand_write_buf;
if (fun->dev_ready)
chip->dev_ready = nand_dev_ready;
return 0;
}