u-boot/drivers/mtd/nand/fsl_upm.c

185 lines
4.3 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* FSL UPM NAND driver
*
* Copyright (C) 2007 MontaVista Software, Inc.
* Anton Vorontsov <avorontsov@ru.mvista.com>
*/
#include <config.h>
#include <common.h>
#include <asm/io.h>
#include <linux/errno.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/fsl_upm.h>
#include <nand.h>
static void fsl_upm_start_pattern(struct fsl_upm *upm, u32 pat_offset)
{
clrsetbits_be32(upm->mxmr, MxMR_MAD_MSK, MxMR_OP_RUNP | pat_offset);
(void)in_be32(upm->mxmr);
}
static void fsl_upm_end_pattern(struct fsl_upm *upm)
{
clrbits_be32(upm->mxmr, MxMR_OP_RUNP);
while (in_be32(upm->mxmr) & MxMR_OP_RUNP)
eieio();
}
static void fsl_upm_run_pattern(struct fsl_upm *upm, int width,
void __iomem *io_addr, u32 mar)
{
out_be32(upm->mar, mar);
(void)in_be32(upm->mar);
switch (width) {
case 8:
out_8(io_addr, 0x0);
break;
case 16:
out_be16(io_addr, 0x0);
break;
case 32:
out_be32(io_addr, 0x0);
break;
}
}
static void fun_wait(struct fsl_upm_nand *fun)
{
if (fun->dev_ready) {
while (!fun->dev_ready(fun->chip_nr))
debug("unexpected busy state\n");
} else {
/*
* If the R/B pin is not connected,
* a short delay is necessary.
*/
udelay(1);
}
}
#if CONFIG_SYS_NAND_MAX_CHIPS > 1
static void fun_select_chip(struct mtd_info *mtd, int chip_nr)
{
struct nand_chip *chip = mtd_to_nand(mtd);
struct fsl_upm_nand *fun = nand_get_controller_data(chip);
if (chip_nr >= 0) {
fun->chip_nr = chip_nr;
chip->IO_ADDR_R = chip->IO_ADDR_W =
fun->upm.io_addr + fun->chip_offset * chip_nr;
} else if (chip_nr == -1) {
chip->cmd_ctrl(mtd, NAND_CMD_NONE, 0 | NAND_CTRL_CHANGE);
}
}
#endif
static void fun_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
struct nand_chip *chip = mtd_to_nand(mtd);
struct fsl_upm_nand *fun = nand_get_controller_data(chip);
void __iomem *io_addr;
u32 mar;
if (!(ctrl & fun->last_ctrl)) {
fsl_upm_end_pattern(&fun->upm);
if (cmd == NAND_CMD_NONE)
return;
fun->last_ctrl = ctrl & (NAND_ALE | NAND_CLE);
}
if (ctrl & NAND_CTRL_CHANGE) {
if (ctrl & NAND_ALE)
fsl_upm_start_pattern(&fun->upm, fun->upm_addr_offset);
else if (ctrl & NAND_CLE)
fsl_upm_start_pattern(&fun->upm, fun->upm_cmd_offset);
}
mar = cmd << (32 - fun->width);
io_addr = fun->upm.io_addr;
#if CONFIG_SYS_NAND_MAX_CHIPS > 1
if (fun->chip_nr > 0) {
io_addr += fun->chip_offset * fun->chip_nr;
if (fun->upm_mar_chip_offset)
mar |= fun->upm_mar_chip_offset * fun->chip_nr;
}
#endif
fsl_upm_run_pattern(&fun->upm, fun->width, io_addr, mar);
/*
* Some boards/chips needs this. At least the MPC8360E-RDK
* needs it. Probably weird chip, because I don't see any
* need for this on MPC8555E + Samsung K9F1G08U0A. Usually
* here are 0-2 unexpected busy states per block read.
*/
if (fun->wait_flags & FSL_UPM_WAIT_RUN_PATTERN)
fun_wait(fun);
}
static u8 upm_nand_read_byte(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd_to_nand(mtd);
return in_8(chip->IO_ADDR_R);
}
static void upm_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
int i;
struct nand_chip *chip = mtd_to_nand(mtd);
struct fsl_upm_nand *fun = nand_get_controller_data(chip);
for (i = 0; i < len; i++) {
out_8(chip->IO_ADDR_W, buf[i]);
if (fun->wait_flags & FSL_UPM_WAIT_WRITE_BYTE)
fun_wait(fun);
}
if (fun->wait_flags & FSL_UPM_WAIT_WRITE_BUFFER)
fun_wait(fun);
}
static void upm_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
{
int i;
struct nand_chip *chip = mtd_to_nand(mtd);
for (i = 0; i < len; i++)
buf[i] = in_8(chip->IO_ADDR_R);
}
static int nand_dev_ready(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd_to_nand(mtd);
struct fsl_upm_nand *fun = nand_get_controller_data(chip);
return fun->dev_ready(fun->chip_nr);
}
int fsl_upm_nand_init(struct nand_chip *chip, struct fsl_upm_nand *fun)
{
if (fun->width != 8 && fun->width != 16 && fun->width != 32)
return -ENOSYS;
fun->last_ctrl = NAND_CLE;
nand_set_controller_data(chip, fun);
chip->chip_delay = fun->chip_delay;
chip->ecc.mode = NAND_ECC_SOFT;
chip->cmd_ctrl = fun_cmd_ctrl;
#if CONFIG_SYS_NAND_MAX_CHIPS > 1
chip->select_chip = fun_select_chip;
#endif
chip->read_byte = upm_nand_read_byte;
chip->read_buf = upm_nand_read_buf;
chip->write_buf = upm_nand_write_buf;
if (fun->dev_ready)
chip->dev_ready = nand_dev_ready;
return 0;
}