mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 00:47:26 +00:00
18948632a9
Initialize the second i2c controller. Signed-off-by: Michael Burr <michael.burr@logicpd.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
307 lines
8.7 KiB
C
307 lines
8.7 KiB
C
/*
|
|
* Driver for the Zynq-7000 PS I2C controller
|
|
* IP from Cadence (ID T-CS-PE-0007-100, Version R1p10f2)
|
|
*
|
|
* Author: Joe Hershberger <joe.hershberger@ni.com>
|
|
* Copyright (c) 2012 Joe Hershberger.
|
|
*
|
|
* Copyright (c) 2012-2013 Xilinx, Michal Simek
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <i2c.h>
|
|
#include <asm/errno.h>
|
|
#include <asm/arch/hardware.h>
|
|
|
|
/* i2c register set */
|
|
struct zynq_i2c_registers {
|
|
u32 control;
|
|
u32 status;
|
|
u32 address;
|
|
u32 data;
|
|
u32 interrupt_status;
|
|
u32 transfer_size;
|
|
u32 slave_mon_pause;
|
|
u32 time_out;
|
|
u32 interrupt_mask;
|
|
u32 interrupt_enable;
|
|
u32 interrupt_disable;
|
|
};
|
|
|
|
/* Control register fields */
|
|
#define ZYNQ_I2C_CONTROL_RW 0x00000001
|
|
#define ZYNQ_I2C_CONTROL_MS 0x00000002
|
|
#define ZYNQ_I2C_CONTROL_NEA 0x00000004
|
|
#define ZYNQ_I2C_CONTROL_ACKEN 0x00000008
|
|
#define ZYNQ_I2C_CONTROL_HOLD 0x00000010
|
|
#define ZYNQ_I2C_CONTROL_SLVMON 0x00000020
|
|
#define ZYNQ_I2C_CONTROL_CLR_FIFO 0x00000040
|
|
#define ZYNQ_I2C_CONTROL_DIV_B_SHIFT 8
|
|
#define ZYNQ_I2C_CONTROL_DIV_B_MASK 0x00003F00
|
|
#define ZYNQ_I2C_CONTROL_DIV_A_SHIFT 14
|
|
#define ZYNQ_I2C_CONTROL_DIV_A_MASK 0x0000C000
|
|
|
|
/* Status register values */
|
|
#define ZYNQ_I2C_STATUS_RXDV 0x00000020
|
|
#define ZYNQ_I2C_STATUS_TXDV 0x00000040
|
|
#define ZYNQ_I2C_STATUS_RXOVF 0x00000080
|
|
#define ZYNQ_I2C_STATUS_BA 0x00000100
|
|
|
|
/* Interrupt register fields */
|
|
#define ZYNQ_I2C_INTERRUPT_COMP 0x00000001
|
|
#define ZYNQ_I2C_INTERRUPT_DATA 0x00000002
|
|
#define ZYNQ_I2C_INTERRUPT_NACK 0x00000004
|
|
#define ZYNQ_I2C_INTERRUPT_TO 0x00000008
|
|
#define ZYNQ_I2C_INTERRUPT_SLVRDY 0x00000010
|
|
#define ZYNQ_I2C_INTERRUPT_RXOVF 0x00000020
|
|
#define ZYNQ_I2C_INTERRUPT_TXOVF 0x00000040
|
|
#define ZYNQ_I2C_INTERRUPT_RXUNF 0x00000080
|
|
#define ZYNQ_I2C_INTERRUPT_ARBLOST 0x00000200
|
|
|
|
#define ZYNQ_I2C_FIFO_DEPTH 16
|
|
#define ZYNQ_I2C_TRANSFERT_SIZE_MAX 255 /* Controller transfer limit */
|
|
|
|
static struct zynq_i2c_registers *i2c_select(struct i2c_adapter *adap)
|
|
{
|
|
return adap->hwadapnr ?
|
|
/* Zynq PS I2C1 */
|
|
(struct zynq_i2c_registers *)ZYNQ_I2C_BASEADDR1 :
|
|
/* Zynq PS I2C0 */
|
|
(struct zynq_i2c_registers *)ZYNQ_I2C_BASEADDR0;
|
|
}
|
|
|
|
/* I2C init called by cmd_i2c when doing 'i2c reset'. */
|
|
static void zynq_i2c_init(struct i2c_adapter *adap, int requested_speed,
|
|
int slaveadd)
|
|
{
|
|
struct zynq_i2c_registers *zynq_i2c = i2c_select(adap);
|
|
|
|
/* 111MHz / ( (3 * 17) * 22 ) = ~100KHz */
|
|
writel((16 << ZYNQ_I2C_CONTROL_DIV_B_SHIFT) |
|
|
(2 << ZYNQ_I2C_CONTROL_DIV_A_SHIFT), &zynq_i2c->control);
|
|
|
|
/* Enable master mode, ack, and 7-bit addressing */
|
|
setbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_MS |
|
|
ZYNQ_I2C_CONTROL_ACKEN | ZYNQ_I2C_CONTROL_NEA);
|
|
}
|
|
|
|
#ifdef DEBUG
|
|
static void zynq_i2c_debug_status(struct zynq_i2c_registers *zynq_i2c)
|
|
{
|
|
int int_status;
|
|
int status;
|
|
int_status = readl(&zynq_i2c->interrupt_status);
|
|
|
|
status = readl(&zynq_i2c->status);
|
|
if (int_status || status) {
|
|
debug("Status: ");
|
|
if (int_status & ZYNQ_I2C_INTERRUPT_COMP)
|
|
debug("COMP ");
|
|
if (int_status & ZYNQ_I2C_INTERRUPT_DATA)
|
|
debug("DATA ");
|
|
if (int_status & ZYNQ_I2C_INTERRUPT_NACK)
|
|
debug("NACK ");
|
|
if (int_status & ZYNQ_I2C_INTERRUPT_TO)
|
|
debug("TO ");
|
|
if (int_status & ZYNQ_I2C_INTERRUPT_SLVRDY)
|
|
debug("SLVRDY ");
|
|
if (int_status & ZYNQ_I2C_INTERRUPT_RXOVF)
|
|
debug("RXOVF ");
|
|
if (int_status & ZYNQ_I2C_INTERRUPT_TXOVF)
|
|
debug("TXOVF ");
|
|
if (int_status & ZYNQ_I2C_INTERRUPT_RXUNF)
|
|
debug("RXUNF ");
|
|
if (int_status & ZYNQ_I2C_INTERRUPT_ARBLOST)
|
|
debug("ARBLOST ");
|
|
if (status & ZYNQ_I2C_STATUS_RXDV)
|
|
debug("RXDV ");
|
|
if (status & ZYNQ_I2C_STATUS_TXDV)
|
|
debug("TXDV ");
|
|
if (status & ZYNQ_I2C_STATUS_RXOVF)
|
|
debug("RXOVF ");
|
|
if (status & ZYNQ_I2C_STATUS_BA)
|
|
debug("BA ");
|
|
debug("TS%d ", readl(&zynq_i2c->transfer_size));
|
|
debug("\n");
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/* Wait for an interrupt */
|
|
static u32 zynq_i2c_wait(struct zynq_i2c_registers *zynq_i2c, u32 mask)
|
|
{
|
|
int timeout, int_status;
|
|
|
|
for (timeout = 0; timeout < 100; timeout++) {
|
|
udelay(100);
|
|
int_status = readl(&zynq_i2c->interrupt_status);
|
|
if (int_status & mask)
|
|
break;
|
|
}
|
|
#ifdef DEBUG
|
|
zynq_i2c_debug_status(zynq_i2c));
|
|
#endif
|
|
/* Clear interrupt status flags */
|
|
writel(int_status & mask, &zynq_i2c->interrupt_status);
|
|
|
|
return int_status & mask;
|
|
}
|
|
|
|
/*
|
|
* I2C probe called by cmd_i2c when doing 'i2c probe'.
|
|
* Begin read, nak data byte, end.
|
|
*/
|
|
static int zynq_i2c_probe(struct i2c_adapter *adap, u8 dev)
|
|
{
|
|
struct zynq_i2c_registers *zynq_i2c = i2c_select(adap);
|
|
|
|
/* Attempt to read a byte */
|
|
setbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_CLR_FIFO |
|
|
ZYNQ_I2C_CONTROL_RW);
|
|
clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_HOLD);
|
|
writel(0xFF, &zynq_i2c->interrupt_status);
|
|
writel(dev, &zynq_i2c->address);
|
|
writel(1, &zynq_i2c->transfer_size);
|
|
|
|
return (zynq_i2c_wait(zynq_i2c, ZYNQ_I2C_INTERRUPT_COMP |
|
|
ZYNQ_I2C_INTERRUPT_NACK) &
|
|
ZYNQ_I2C_INTERRUPT_COMP) ? 0 : -ETIMEDOUT;
|
|
}
|
|
|
|
/*
|
|
* I2C read called by cmd_i2c when doing 'i2c read' and by cmd_eeprom.c
|
|
* Begin write, send address byte(s), begin read, receive data bytes, end.
|
|
*/
|
|
static int zynq_i2c_read(struct i2c_adapter *adap, u8 dev, uint addr,
|
|
int alen, u8 *data, int length)
|
|
{
|
|
u32 status;
|
|
u32 i = 0;
|
|
u8 *cur_data = data;
|
|
struct zynq_i2c_registers *zynq_i2c = i2c_select(adap);
|
|
|
|
/* Check the hardware can handle the requested bytes */
|
|
if ((length < 0) || (length > ZYNQ_I2C_TRANSFERT_SIZE_MAX))
|
|
return -EINVAL;
|
|
|
|
/* Write the register address */
|
|
setbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_CLR_FIFO |
|
|
ZYNQ_I2C_CONTROL_HOLD);
|
|
/*
|
|
* Temporarily disable restart (by clearing hold)
|
|
* It doesn't seem to work.
|
|
*/
|
|
clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_HOLD);
|
|
writel(0xFF, &zynq_i2c->interrupt_status);
|
|
if (alen) {
|
|
clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_RW);
|
|
writel(dev, &zynq_i2c->address);
|
|
while (alen--)
|
|
writel(addr >> (8 * alen), &zynq_i2c->data);
|
|
|
|
/* Wait for the address to be sent */
|
|
if (!zynq_i2c_wait(zynq_i2c, ZYNQ_I2C_INTERRUPT_COMP)) {
|
|
/* Release the bus */
|
|
clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_HOLD);
|
|
return -ETIMEDOUT;
|
|
}
|
|
debug("Device acked address\n");
|
|
}
|
|
|
|
setbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_CLR_FIFO |
|
|
ZYNQ_I2C_CONTROL_RW);
|
|
/* Start reading data */
|
|
writel(dev, &zynq_i2c->address);
|
|
writel(length, &zynq_i2c->transfer_size);
|
|
|
|
/* Wait for data */
|
|
do {
|
|
status = zynq_i2c_wait(zynq_i2c, ZYNQ_I2C_INTERRUPT_COMP |
|
|
ZYNQ_I2C_INTERRUPT_DATA);
|
|
if (!status) {
|
|
/* Release the bus */
|
|
clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_HOLD);
|
|
return -ETIMEDOUT;
|
|
}
|
|
debug("Read %d bytes\n",
|
|
length - readl(&zynq_i2c->transfer_size));
|
|
for (; i < length - readl(&zynq_i2c->transfer_size); i++)
|
|
*(cur_data++) = readl(&zynq_i2c->data);
|
|
} while (readl(&zynq_i2c->transfer_size) != 0);
|
|
/* All done... release the bus */
|
|
clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_HOLD);
|
|
|
|
#ifdef DEBUG
|
|
zynq_i2c_debug_status();
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* I2C write called by cmd_i2c when doing 'i2c write' and by cmd_eeprom.c
|
|
* Begin write, send address byte(s), send data bytes, end.
|
|
*/
|
|
static int zynq_i2c_write(struct i2c_adapter *adap, u8 dev, uint addr,
|
|
int alen, u8 *data, int length)
|
|
{
|
|
u8 *cur_data = data;
|
|
struct zynq_i2c_registers *zynq_i2c = i2c_select(adap);
|
|
|
|
/* Write the register address */
|
|
setbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_CLR_FIFO |
|
|
ZYNQ_I2C_CONTROL_HOLD);
|
|
clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_RW);
|
|
writel(0xFF, &zynq_i2c->interrupt_status);
|
|
writel(dev, &zynq_i2c->address);
|
|
if (alen) {
|
|
while (alen--)
|
|
writel(addr >> (8 * alen), &zynq_i2c->data);
|
|
/* Start the tranfer */
|
|
if (!zynq_i2c_wait(zynq_i2c, ZYNQ_I2C_INTERRUPT_COMP)) {
|
|
/* Release the bus */
|
|
clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_HOLD);
|
|
return -ETIMEDOUT;
|
|
}
|
|
debug("Device acked address\n");
|
|
}
|
|
|
|
while (length--) {
|
|
writel(*(cur_data++), &zynq_i2c->data);
|
|
if (readl(&zynq_i2c->transfer_size) == ZYNQ_I2C_FIFO_DEPTH) {
|
|
if (!zynq_i2c_wait(zynq_i2c, ZYNQ_I2C_INTERRUPT_COMP)) {
|
|
/* Release the bus */
|
|
clrbits_le32(&zynq_i2c->control,
|
|
ZYNQ_I2C_CONTROL_HOLD);
|
|
return -ETIMEDOUT;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* All done... release the bus */
|
|
clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_HOLD);
|
|
/* Wait for the address and data to be sent */
|
|
if (!zynq_i2c_wait(zynq_i2c, ZYNQ_I2C_INTERRUPT_COMP))
|
|
return -ETIMEDOUT;
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int zynq_i2c_set_bus_speed(struct i2c_adapter *adap,
|
|
unsigned int speed)
|
|
{
|
|
if (speed != 1000000)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
U_BOOT_I2C_ADAP_COMPLETE(zynq_0, zynq_i2c_init, zynq_i2c_probe, zynq_i2c_read,
|
|
zynq_i2c_write, zynq_i2c_set_bus_speed,
|
|
CONFIG_SYS_I2C_ZYNQ_SPEED, CONFIG_SYS_I2C_ZYNQ_SLAVE,
|
|
0)
|
|
U_BOOT_I2C_ADAP_COMPLETE(zynq_1, zynq_i2c_init, zynq_i2c_probe, zynq_i2c_read,
|
|
zynq_i2c_write, zynq_i2c_set_bus_speed,
|
|
CONFIG_SYS_I2C_ZYNQ_SPEED, CONFIG_SYS_I2C_ZYNQ_SLAVE,
|
|
1)
|