u-boot/board/freescale/common
Timur Tabi 82c9dfdc20 powerpc/fsl: add 'pixis_reset dump' command
Add the 'pixis_reset dump' command, which displays the contents of the PIXIS
registers.  This command is only available if DEBUG is defined.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-04-28 22:09:23 -05:00
..
cadmus.c rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
cadmus.h Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale. 2007-12-11 22:34:20 -06:00
cds_pci_ft.c FSL: Clean up board/freescale/common/Makefile 2008-03-26 11:43:04 -05:00
cds_via.c FSL: Clean up board/freescale/common/Makefile 2008-03-26 11:43:04 -05:00
eeprom.h Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale. 2007-12-11 22:34:20 -06:00
ics307_clk.c Move ICS CLK chip frequency calculation code into a common board library 2010-07-16 10:55:08 -05:00
ics307_clk.h Move ICS CLK chip frequency calculation code into a common board library 2010-07-16 10:55:08 -05:00
Makefile powerpc: Add P3041DS/P5020DS board support (uses corenet_ds code) 2011-04-27 22:29:04 -05:00
ngpixis.c powerpc/fsl: add 'pixis_reset dump' command 2011-04-28 22:09:23 -05:00
ngpixis.h powerpc: Add P3041DS/P5020DS board support (uses corenet_ds code) 2011-04-27 22:29:04 -05:00
pixis.c Make sure that argv[] argument pointers are not modified. 2010-07-04 23:55:42 +02:00
pixis.h ppc/85xx: Add a structure defn for PIXIS registers 2010-07-16 10:55:08 -05:00
pq-mds-pib.c ppc/85xx: Add PIB/ATM support for MPC8569mds 2010-01-25 22:13:26 -06:00
pq-mds-pib.h mpc83xx: Split PIB init code from pci.c and add Qoc3 ATM card support 2007-08-16 23:12:11 -05:00
sdhc_boot.c powerpc/85xx: Enable eSDHC boot support on P2020 DS 2011-04-04 22:26:32 -05:00
sgmii_riser.c fsl: Remove unnecessary debug printfs 2009-03-09 17:46:10 -05:00
sgmii_riser.h Fixup SGMII PHY ids in the device tree 2009-02-16 18:05:54 -06:00
sys_eeprom.c fsl: obsolete NXID v0 EEPROMs, automatically upgrade them to NXID v1 2011-04-04 09:24:42 -05:00
via.h Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale. 2007-12-11 22:34:20 -06:00