mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-25 12:33:41 +00:00
576007aec9
Add support for optional soft reset (i.e. "RESOUT_N" not asserted during reset). To be compatible with the original U-Boot code, when the "addr" parameter is 0, a hard is performed; for any other values, a soft reset is done. Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
78 lines
1.8 KiB
C
78 lines
1.8 KiB
C
/*
|
|
* Copyright (C) 2011-2015 by Vladimir Zapolskiy <vz@mleia.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <netdev.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/clk.h>
|
|
#include <asm/arch/wdt.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/io.h>
|
|
|
|
static struct clk_pm_regs *clk = (struct clk_pm_regs *)CLK_PM_BASE;
|
|
static struct wdt_regs *wdt = (struct wdt_regs *)WDT_BASE;
|
|
|
|
void reset_cpu(ulong addr)
|
|
{
|
|
/* Enable watchdog clock */
|
|
setbits_le32(&clk->timclk_ctrl, CLK_TIMCLK_WATCHDOG);
|
|
|
|
/* To be compatible with the original U-Boot code:
|
|
* addr: - 0: perform hard reset.
|
|
* - !=0: perform a soft reset; i.e. "RESOUT_N" not asserted). */
|
|
if (addr == 0) {
|
|
/* Reset pulse length is 13005 peripheral clock frames */
|
|
writel(13000, &wdt->pulse);
|
|
|
|
/* Force WDOG_RESET2 and RESOUT_N signal active */
|
|
writel(WDTIM_MCTRL_RESFRC2 | WDTIM_MCTRL_RESFRC1
|
|
| WDTIM_MCTRL_M_RES2, &wdt->mctrl);
|
|
} else {
|
|
/* Force match output active */
|
|
writel(0x01, &wdt->emr);
|
|
|
|
/* Internal reset on match output (no pulse on "RESOUT_N") */
|
|
writel(WDTIM_MCTRL_M_RES1, &wdt->mctrl);
|
|
}
|
|
|
|
while (1)
|
|
/* NOP */;
|
|
}
|
|
|
|
#if defined(CONFIG_ARCH_CPU_INIT)
|
|
int arch_cpu_init(void)
|
|
{
|
|
/*
|
|
* It might be necessary to flush data cache, if U-boot is loaded
|
|
* from kickstart bootloader, e.g. from S1L loader
|
|
*/
|
|
flush_dcache_all();
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
#error "You have to select CONFIG_ARCH_CPU_INIT"
|
|
#endif
|
|
|
|
#if defined(CONFIG_DISPLAY_CPUINFO)
|
|
int print_cpuinfo(void)
|
|
{
|
|
printf("CPU: NXP LPC32XX\n");
|
|
printf("CPU clock: %uMHz\n", get_hclk_pll_rate() / 1000000);
|
|
printf("AHB bus clock: %uMHz\n", get_hclk_clk_rate() / 1000000);
|
|
printf("Peripheral clock: %uMHz\n", get_periph_clk_rate() / 1000000);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_LPC32XX_ETH
|
|
int cpu_eth_init(bd_t *bis)
|
|
{
|
|
lpc32xx_eth_initialize(bis);
|
|
return 0;
|
|
}
|
|
#endif
|