Andrew F. Davis b5700efbc8 arm: K3: am654: Choose MMC boot device based on boot port ... For most devices the boot mode maps directly to the boot device. For MMC this is not the case as we have two MMC boot modes and two MMC boot devices (ports). Check the boot port to determine which MMC device was our boot device. Make this change for both primary and secondary boot modes. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>		2018-10-10 13:35:08 -04:00
..
cpu	Switch to driver model for eSDHC on Layerscape SoCs including LS1021A,	2018-09-29 11:47:32 -04:00
dts	ARM: meson: Add Khadas VIM2 board DT	2018-10-10 13:32:40 -04:00
include	Switch to driver model for eSDHC on Layerscape SoCs including LS1021A,	2018-09-29 11:47:32 -04:00
lib	arm: K3: Update _start instruction	2018-09-11 08:32:55 -04:00
mach-aspeed
mach-at91	board: sama5d2_ptc_ek: add pda detect call at init time	2018-09-28 20:22:40 -04:00
mach-bcm283x
mach-bcmstb	board: arm: Add support for Broadcom BCM7260	2018-09-10 21:19:31 -04:00
mach-davinci	gpio: da8xx: Push generic defines of gpio.h out of mach-davinci	2018-10-10 13:35:03 -04:00
mach-exynos	Kconfig: Sort bool, default, select and imply options	2018-07-30 07:18:48 -04:00
mach-highbank
mach-imx	pico-imx6ul: Convert to SPL	2018-09-14 15:04:24 +02:00
mach-integrator
mach-k3	arm: K3: am654: Choose MMC boot device based on boot port	2018-10-10 13:35:08 -04:00
mach-keystone
mach-kirkwood	Convert CONFIG_MII et al to Kconfig	2018-08-17 13:03:54 -04:00
mach-meson	ARM: meson: Add Khadas VIM2 board support	2018-10-10 13:32:40 -04:00
mach-mvebu	ARM: mach-mvebu: handle fall-back to UART boot	2018-09-19 08:59:26 +02:00
mach-omap2	ARM: mach-omap2: Don't initialize I2C if DM_I2C is enabled	2018-09-11 21:39:02 -04:00
mach-orion5x
mach-owl
mach-qemu	Kconfig: Sort bool, default, select and imply options	2018-07-30 07:18:48 -04:00
mach-rmobile	ARM: rmobile: Enable PHY framework on Gen3	2018-10-03 12:56:13 +02:00
mach-rockchip	rockchip: make_fit_atf: make python3 compatible	2018-10-04 21:15:46 +02:00
mach-s5pc1xx
mach-snapdragon	db410c: serial# env using msm board serial	2018-09-30 13:00:35 -04:00
mach-socfpga	arm: socfpga: stratix10: add sgmii in phymode setup	2018-10-03 12:56:50 +02:00
mach-sti
mach-stm32	mach-stm32: Set MPU SDRAM size to 512MB for STM32F7/H7	2018-10-06 14:09:41 -04:00
mach-stm32mp
mach-sunxi	sunxi: A64: fix default DRAM_ODT_EN symbol	2018-08-13 16:47:38 +05:30
mach-tegra	ARM: tegra: reserve unmapped RAM so EFI doesn't use it	2018-09-23 21:55:29 +02:00
mach-uniphier	mtd: move NAND files into a raw/ subdirectory	2018-09-20 20:10:49 +05:30
mach-versatile
mach-zynq	Kconfig: Move config SYS_MALLOC_LEN to Kconfig for zynq	2018-08-06 08:44:35 +02:00
mach-zynqmp-r5
thumb1/include/asm/proc-armv
config.mk
Kconfig	Xilinx changes for v2018.11	2018-09-27 08:29:10 -04:00
Kconfig.debug
Makefile	arm: K3: Add initial support for TI's K3 generation of SoCs	2018-09-11 08:32:55 -04:00