Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-25 22:20:45 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arm/mach-keystone/ddr3.c
Harald Seiler 35b65dd8ef reset: Remove addr parameter from reset_cpu() 
Historically, the reset_cpu() function had an `addr` parameter which was
meant to pass in an address of the reset vector location, where the CPU
should reset to.  This feature is no longer used anywhere in U-Boot as
all reset_cpu() implementations now ignore the passed value.  Generic
code has been added which always calls reset_cpu() with `0` which means
this feature can no longer be used easily anyway.

Over time, many implementations seem to have "misunderstood" the
existence of this parameter as a way to customize/parameterize the reset
(e.g.  COLD vs WARM resets).  As this is not properly supported, the
code will almost always not do what it is intended to (because all
call-sites just call reset_cpu() with 0).

To avoid confusion and to clean up the codebase from unused left-overs
of the past, remove the `addr` parameter entirely.  Code which intends
to support different kinds of resets should be rewritten as a sysreset
driver instead.

This transformation was done with the following coccinelle patch:

    @@
    expression argvalue;
    @@
    - reset_cpu(argvalue)
    + reset_cpu()

    @@
    identifier argname;
    type argtype;
    @@
    - reset_cpu(argtype argname)
    + reset_cpu(void)
    { ... }

Signed-off-by: Harald Seiler <hws@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
2021-03-02 14:03:02 -05:00

451 lines
12 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* Keystone2: DDR3 initialization
*
* (C) Copyright 2012-2014
* Texas Instruments Incorporated, <www.ti.com>
*/
#include <cpu_func.h>
#include <env.h>
#include <asm/io.h>
#include <common.h>
#include <asm/arch/msmc.h>
#include <asm/arch/ddr3.h>
#include <asm/arch/psc_defs.h>
#include <linux/delay.h>
#include <asm/ti-common/ti-edma3.h>
#define DDR3_EDMA_BLK_SIZE_SHIFT 10
#define DDR3_EDMA_BLK_SIZE (1 << DDR3_EDMA_BLK_SIZE_SHIFT)
#define DDR3_EDMA_BCNT 0x8000
#define DDR3_EDMA_CCNT 1
#define DDR3_EDMA_XF_SIZE (DDR3_EDMA_BLK_SIZE * DDR3_EDMA_BCNT)
#define DDR3_EDMA_SLOT_NUM 1
void ddr3_init_ddrphy(u32 base, struct ddr3_phy_config *phy_cfg)
{
unsigned int tmp;
while ((__raw_readl(base + KS2_DDRPHY_PGSR0_OFFSET)
& 0x00000001) != 0x00000001)
;
__raw_writel(phy_cfg->pllcr, base + KS2_DDRPHY_PLLCR_OFFSET);
tmp = __raw_readl(base + KS2_DDRPHY_PGCR1_OFFSET);
tmp &= ~(phy_cfg->pgcr1_mask);
tmp |= phy_cfg->pgcr1_val;
__raw_writel(tmp, base + KS2_DDRPHY_PGCR1_OFFSET);
__raw_writel(phy_cfg->ptr0, base + KS2_DDRPHY_PTR0_OFFSET);
__raw_writel(phy_cfg->ptr1, base + KS2_DDRPHY_PTR1_OFFSET);
__raw_writel(phy_cfg->ptr3, base + KS2_DDRPHY_PTR3_OFFSET);
__raw_writel(phy_cfg->ptr4, base + KS2_DDRPHY_PTR4_OFFSET);
tmp = __raw_readl(base + KS2_DDRPHY_DCR_OFFSET);
tmp &= ~(phy_cfg->dcr_mask);
tmp |= phy_cfg->dcr_val;
__raw_writel(tmp, base + KS2_DDRPHY_DCR_OFFSET);
__raw_writel(phy_cfg->dtpr0, base + KS2_DDRPHY_DTPR0_OFFSET);
__raw_writel(phy_cfg->dtpr1, base + KS2_DDRPHY_DTPR1_OFFSET);
__raw_writel(phy_cfg->dtpr2, base + KS2_DDRPHY_DTPR2_OFFSET);
__raw_writel(phy_cfg->mr0, base + KS2_DDRPHY_MR0_OFFSET);
__raw_writel(phy_cfg->mr1, base + KS2_DDRPHY_MR1_OFFSET);
__raw_writel(phy_cfg->mr2, base + KS2_DDRPHY_MR2_OFFSET);
__raw_writel(phy_cfg->dtcr, base + KS2_DDRPHY_DTCR_OFFSET);
__raw_writel(phy_cfg->pgcr2, base + KS2_DDRPHY_PGCR2_OFFSET);
__raw_writel(phy_cfg->zq0cr1, base + KS2_DDRPHY_ZQ0CR1_OFFSET);
__raw_writel(phy_cfg->zq1cr1, base + KS2_DDRPHY_ZQ1CR1_OFFSET);
__raw_writel(phy_cfg->zq2cr1, base + KS2_DDRPHY_ZQ2CR1_OFFSET);
__raw_writel(phy_cfg->pir_v1, base + KS2_DDRPHY_PIR_OFFSET);
while ((__raw_readl(base + KS2_DDRPHY_PGSR0_OFFSET) & 0x1) != 0x1)
;
if (cpu_is_k2g()) {
clrsetbits_le32(base + KS2_DDRPHY_DATX8_2_OFFSET,
phy_cfg->datx8_2_mask,
phy_cfg->datx8_2_val);
clrsetbits_le32(base + KS2_DDRPHY_DATX8_3_OFFSET,
phy_cfg->datx8_3_mask,
phy_cfg->datx8_3_val);
clrsetbits_le32(base + KS2_DDRPHY_DATX8_4_OFFSET,
phy_cfg->datx8_4_mask,
phy_cfg->datx8_4_val);
clrsetbits_le32(base + KS2_DDRPHY_DATX8_5_OFFSET,
phy_cfg->datx8_5_mask,
phy_cfg->datx8_5_val);
clrsetbits_le32(base + KS2_DDRPHY_DATX8_6_OFFSET,
phy_cfg->datx8_6_mask,
phy_cfg->datx8_6_val);
clrsetbits_le32(base + KS2_DDRPHY_DATX8_7_OFFSET,
phy_cfg->datx8_7_mask,
phy_cfg->datx8_7_val);
clrsetbits_le32(base + KS2_DDRPHY_DATX8_8_OFFSET,
phy_cfg->datx8_8_mask,
phy_cfg->datx8_8_val);
}
__raw_writel(phy_cfg->pir_v2, base + KS2_DDRPHY_PIR_OFFSET);
while ((__raw_readl(base + KS2_DDRPHY_PGSR0_OFFSET) & 0x1) != 0x1)
;
}
void ddr3_init_ddremif(u32 base, struct ddr3_emif_config *emif_cfg)
{
__raw_writel(emif_cfg->sdcfg, base + KS2_DDR3_SDCFG_OFFSET);
__raw_writel(emif_cfg->sdtim1, base + KS2_DDR3_SDTIM1_OFFSET);
__raw_writel(emif_cfg->sdtim2, base + KS2_DDR3_SDTIM2_OFFSET);
__raw_writel(emif_cfg->sdtim3, base + KS2_DDR3_SDTIM3_OFFSET);
__raw_writel(emif_cfg->sdtim4, base + KS2_DDR3_SDTIM4_OFFSET);
__raw_writel(emif_cfg->zqcfg, base + KS2_DDR3_ZQCFG_OFFSET);
__raw_writel(emif_cfg->sdrfc, base + KS2_DDR3_SDRFC_OFFSET);
}
int ddr3_ecc_support_rmw(u32 base)
{
u32 value = __raw_readl(base + KS2_DDR3_MIDR_OFFSET);
/* Check the DDR3 controller ID reg if the controllers
supports ECC RMW or not */
if (value == 0x40461C02)
return 1;
return 0;
}
static void ddr3_ecc_config(u32 base, u32 value)
{
u32 data;
__raw_writel(value, base + KS2_DDR3_ECC_CTRL_OFFSET);
udelay(100000); /* delay required to synchronize across clock domains */
if (value & KS2_DDR3_ECC_EN) {
/* Clear the 1-bit error count */
data = __raw_readl(base + KS2_DDR3_ONE_BIT_ECC_ERR_CNT_OFFSET);
__raw_writel(data, base + KS2_DDR3_ONE_BIT_ECC_ERR_CNT_OFFSET);
/* enable the ECC interrupt */
__raw_writel(KS2_DDR3_1B_ECC_ERR_SYS | KS2_DDR3_2B_ECC_ERR_SYS |
KS2_DDR3_WR_ECC_ERR_SYS,
base + KS2_DDR3_ECC_INT_ENABLE_SET_SYS_OFFSET);
/* Clear the ECC error interrupt status */
__raw_writel(KS2_DDR3_1B_ECC_ERR_SYS | KS2_DDR3_2B_ECC_ERR_SYS |
KS2_DDR3_WR_ECC_ERR_SYS,
base + KS2_DDR3_ECC_INT_STATUS_OFFSET);
}
}
static void ddr3_reset_data(u32 base, u32 ddr3_size)
{
u32 mpax[2];
u32 seg_num;
u32 seg, blks, dst, edma_blks;
struct edma3_slot_config slot;
struct edma3_channel_config edma_channel;
u32 edma_src[DDR3_EDMA_BLK_SIZE/4] __aligned(16) = {0, };
/* Setup an edma to copy the 1k block to the entire DDR */
puts("\nClear entire DDR3 memory to enable ECC\n");
/* save the SES MPAX regs */
if (cpu_is_k2g())
msmc_get_ses_mpax(K2G_MSMC_SEGMENT_ARM, 0, mpax);
else
msmc_get_ses_mpax(K2HKLE_MSMC_SEGMENT_ARM, 0, mpax);
/* setup edma slot 1 configuration */
slot.opt = EDMA3_SLOPT_TRANS_COMP_INT_ENB |
EDMA3_SLOPT_COMP_CODE(0) |
EDMA3_SLOPT_STATIC | EDMA3_SLOPT_AB_SYNC;
slot.bcnt = DDR3_EDMA_BCNT;
slot.acnt = DDR3_EDMA_BLK_SIZE;
slot.ccnt = DDR3_EDMA_CCNT;
slot.src_bidx = 0;
slot.dst_bidx = DDR3_EDMA_BLK_SIZE;
slot.src_cidx = 0;
slot.dst_cidx = 0;
slot.link = EDMA3_PARSET_NULL_LINK;
slot.bcntrld = 0;
edma3_slot_configure(KS2_EDMA0_BASE, DDR3_EDMA_SLOT_NUM, &slot);
/* configure quik edma channel */
edma_channel.slot = DDR3_EDMA_SLOT_NUM;
edma_channel.chnum = 0;
edma_channel.complete_code = 0;
/* event trigger after dst update */
edma_channel.trigger_slot_word = EDMA3_TWORD(dst);
qedma3_start(KS2_EDMA0_BASE, &edma_channel);
/* DDR3 size in segments (4KB seg size) */
seg_num = ddr3_size << (30 - KS2_MSMC_SEG_SIZE_SHIFT);
for (seg = 0; seg < seg_num; seg += KS2_MSMC_MAP_SEG_NUM) {
/* map 2GB 36-bit DDR address to 32-bit DDR address in EMIF
access slave interface so that edma driver can access */
if (cpu_is_k2g()) {
msmc_map_ses_segment(K2G_MSMC_SEGMENT_ARM, 0,
base >> KS2_MSMC_SEG_SIZE_SHIFT,
KS2_MSMC_DST_SEG_BASE + seg,
MPAX_SEG_2G);
} else {
msmc_map_ses_segment(K2HKLE_MSMC_SEGMENT_ARM, 0,
base >> KS2_MSMC_SEG_SIZE_SHIFT,
KS2_MSMC_DST_SEG_BASE + seg,
MPAX_SEG_2G);
}
if ((seg_num - seg) > KS2_MSMC_MAP_SEG_NUM)
edma_blks = KS2_MSMC_MAP_SEG_NUM <<
(KS2_MSMC_SEG_SIZE_SHIFT
- DDR3_EDMA_BLK_SIZE_SHIFT);
else
edma_blks = (seg_num - seg) << (KS2_MSMC_SEG_SIZE_SHIFT
- DDR3_EDMA_BLK_SIZE_SHIFT);
/* Use edma driver to scrub 2GB DDR memory */
for (dst = base, blks = 0; blks < edma_blks;
blks += DDR3_EDMA_BCNT, dst += DDR3_EDMA_XF_SIZE) {
edma3_set_src_addr(KS2_EDMA0_BASE,
edma_channel.slot, (u32)edma_src);
edma3_set_dest_addr(KS2_EDMA0_BASE,
edma_channel.slot, (u32)dst);
while (edma3_check_for_transfer(KS2_EDMA0_BASE,
&edma_channel))
udelay(10);
}
}
qedma3_stop(KS2_EDMA0_BASE, &edma_channel);
/* restore the SES MPAX regs */
if (cpu_is_k2g())
msmc_set_ses_mpax(K2G_MSMC_SEGMENT_ARM, 0, mpax);
else
msmc_set_ses_mpax(K2HKLE_MSMC_SEGMENT_ARM, 0, mpax);
}
static void ddr3_ecc_init_range(u32 base)
{
u32 ecc_val = KS2_DDR3_ECC_EN;
u32 rmw = ddr3_ecc_support_rmw(base);
if (rmw)
ecc_val |= KS2_DDR3_ECC_RMW_EN;
__raw_writel(0, base + KS2_DDR3_ECC_ADDR_RANGE1_OFFSET);
ddr3_ecc_config(base, ecc_val);
}
void ddr3_enable_ecc(u32 base, int test)
{
u32 ecc_val = KS2_DDR3_ECC_ENABLE;
u32 rmw = ddr3_ecc_support_rmw(base);
if (test)
ecc_val |= KS2_DDR3_ECC_ADDR_RNG_1_EN;
if (!rmw) {
if (!test)
/* by default, disable ecc when rmw = 0 and no
ecc test */
ecc_val = 0;
} else {
ecc_val |= KS2_DDR3_ECC_RMW_EN;
}
ddr3_ecc_config(base, ecc_val);
}
void ddr3_disable_ecc(u32 base)
{
ddr3_ecc_config(base, 0);
}
#if defined(CONFIG_SOC_K2HK) || defined(CONFIG_SOC_K2L)
static void cic_init(u32 base)
{
/* Disable CIC global interrupts */
__raw_writel(0, base + KS2_CIC_GLOBAL_ENABLE);
/* Set to normal mode, no nesting, no priority hold */
__raw_writel(0, base + KS2_CIC_CTRL);
__raw_writel(0, base + KS2_CIC_HOST_CTRL);
/* Enable CIC global interrupts */
__raw_writel(1, base + KS2_CIC_GLOBAL_ENABLE);
}
static void cic_map_cic_to_gic(u32 base, u32 chan_num, u32 irq_num)
{
/* Map the system interrupt to a CIC channel */
__raw_writeb(chan_num, base + KS2_CIC_CHAN_MAP(0) + irq_num);
/* Enable CIC system interrupt */
__raw_writel(irq_num, base + KS2_CIC_SYS_ENABLE_IDX_SET);
/* Enable CIC Host interrupt */
__raw_writel(chan_num, base + KS2_CIC_HOST_ENABLE_IDX_SET);
}
static void ddr3_map_ecc_cic2_irq(u32 base)
{
cic_init(base);
cic_map_cic_to_gic(base, KS2_CIC2_DDR3_ECC_CHAN_NUM,
KS2_CIC2_DDR3_ECC_IRQ_NUM);
}
#endif
void ddr3_init_ecc(u32 base, u32 ddr3_size)
{
if (!ddr3_ecc_support_rmw(base)) {
ddr3_disable_ecc(base);
return;
}
ddr3_ecc_init_range(base);
ddr3_reset_data(CONFIG_SYS_SDRAM_BASE, ddr3_size);
/* mapping DDR3 ECC system interrupt from CIC2 to GIC */
#if defined(CONFIG_SOC_K2HK) || defined(CONFIG_SOC_K2L)
ddr3_map_ecc_cic2_irq(KS2_CIC2_BASE);
#endif
ddr3_enable_ecc(base, 0);
}
void ddr3_check_ecc_int(u32 base)
{
char *env;
int ecc_test = 0;
u32 value = __raw_readl(base + KS2_DDR3_ECC_INT_STATUS_OFFSET);
env = env_get("ecc_test");
if (env)
ecc_test = simple_strtol(env, NULL, 0);
if (value & KS2_DDR3_WR_ECC_ERR_SYS)
puts("DDR3 ECC write error interrupted\n");
if (value & KS2_DDR3_2B_ECC_ERR_SYS) {
puts("DDR3 ECC 2-bit error interrupted\n");
if (!ecc_test) {
puts("Reseting the device ...\n");
reset_cpu();
}
}
value = __raw_readl(base + KS2_DDR3_ONE_BIT_ECC_ERR_CNT_OFFSET);
if (value) {
printf("1-bit ECC err count: 0x%x\n", value);
value = __raw_readl(base +
KS2_DDR3_ONE_BIT_ECC_ERR_ADDR_LOG_OFFSET);
printf("1-bit ECC err address log: 0x%x\n", value);
}
}
void ddr3_reset_ddrphy(void)
{
u32 tmp;
/* Assert DDR3A PHY reset */
tmp = readl(KS2_DDR3APLLCTL1);
tmp |= KS2_DDR3_PLLCTRL_PHY_RESET;
writel(tmp, KS2_DDR3APLLCTL1);
/* wait 10us to catch the reset */
udelay(10);
/* Release DDR3A PHY reset */
tmp = readl(KS2_DDR3APLLCTL1);
tmp &= ~KS2_DDR3_PLLCTRL_PHY_RESET;
__raw_writel(tmp, KS2_DDR3APLLCTL1);
}
#ifdef CONFIG_SOC_K2HK
/**
* ddr3_reset_workaround - reset workaround in case if leveling error
* detected for PG 1.0 and 1.1 k2hk SoCs
*/
void ddr3_err_reset_workaround(void)
{
unsigned int tmp;
unsigned int tmp_a;
unsigned int tmp_b;
/*
* Check for PGSR0 error bits of DDR3 PHY.
* Check for WLERR, QSGERR, WLAERR,
* RDERR, WDERR, REERR, WEERR error to see if they are set or not
*/
tmp_a = __raw_readl(KS2_DDR3A_DDRPHYC + KS2_DDRPHY_PGSR0_OFFSET);
tmp_b = __raw_readl(KS2_DDR3B_DDRPHYC + KS2_DDRPHY_PGSR0_OFFSET);
if (((tmp_a & 0x0FE00000) != 0) || ((tmp_b & 0x0FE00000) != 0)) {
printf("DDR Leveling Error Detected!\n");
printf("DDR3A PGSR0 = 0x%x\n", tmp_a);
printf("DDR3B PGSR0 = 0x%x\n", tmp_b);
/*
* Write Keys to KICK registers to enable writes to registers
* in boot config space
*/
__raw_writel(KS2_KICK0_MAGIC, KS2_KICK0);
__raw_writel(KS2_KICK1_MAGIC, KS2_KICK1);
/*
* Move DDR3A Module out of reset isolation by setting
* MDCTL23[12] = 0
*/
tmp_a = __raw_readl(KS2_PSC_BASE +
PSC_REG_MDCTL(KS2_LPSC_EMIF4F_DDR3A));
tmp_a = PSC_REG_MDCTL_SET_RESET_ISO(tmp_a, 0);
__raw_writel(tmp_a, KS2_PSC_BASE +
PSC_REG_MDCTL(KS2_LPSC_EMIF4F_DDR3A));
/*
* Move DDR3B Module out of reset isolation by setting
* MDCTL24[12] = 0
*/
tmp_b = __raw_readl(KS2_PSC_BASE +
PSC_REG_MDCTL(KS2_LPSC_EMIF4F_DDR3B));
tmp_b = PSC_REG_MDCTL_SET_RESET_ISO(tmp_b, 0);
__raw_writel(tmp_b, KS2_PSC_BASE +
PSC_REG_MDCTL(KS2_LPSC_EMIF4F_DDR3B));
/*
* Write 0x5A69 Key to RSTCTRL[15:0] to unlock writes
* to RSTCTRL and RSTCFG
*/
tmp = __raw_readl(KS2_RSTCTRL);
tmp &= KS2_RSTCTRL_MASK;
tmp |= KS2_RSTCTRL_KEY;
__raw_writel(tmp, KS2_RSTCTRL);
/*
* Set PLL Controller to drive hard reset on SW trigger by
* setting RSTCFG[13] = 0
*/
tmp = __raw_readl(KS2_RSTCTRL_RSCFG);
tmp &= ~KS2_RSTYPE_PLL_SOFT;
__raw_writel(tmp, KS2_RSTCTRL_RSCFG);
reset_cpu();
}
}
#endif
Reference in a new issue View git blame Copy permalink