u-boot/board/freescale/ls1012afrdm
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00
..
eth.c SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
Kconfig board: freescale: ls1012afrdm: enable network support on ls1012afrdm 2018-03-22 15:05:29 -05:00
ls1012afrdm.c SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
MAINTAINERS armv8: ls1012a: Add support of ls1012afrdm board 2016-06-03 14:12:51 -07:00
Makefile board: freescale: ls1012afrdm: enable network support on ls1012afrdm 2018-03-22 15:05:29 -05:00
README armv8: ls1012a: Add support of ls1012afrdm board 2016-06-03 14:12:51 -07:00

Overview
--------
QorIQ LS1012A FREEDOM (LS1012AFRDM) is a high-performance development
platform, with a complete debugging environment. The LS1012AFRDM board
supports the QorIQ LS1012A processor and is optimized to support the
high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports.

LS1012A SoC Overview
--------------------
Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS2080A
SoC overview.

 LS1012AFRDM board Overview
 -----------------------
 - SERDES Connections, 2 lanes supportingspeeds upto 1 Gbit/s
     - 2 SGMII 1G PHYs
 - DDR Controller
     - 4 Gb DDR3L SDRAM memory, running at data rates up to 1 GT/s
	operating at 1.35 V
 - QSPI
     - Onboard 512 Mbit QSPI flash memory running at speed up
      to 108/54 MHz
 - One high-speed USB 2.0/3.0 port, one USB 2.0 port
     - USB 2.0/3.0 port is configured as On-The-Go (OTG) with a
       Micro-AB connector.
     - USB 2.0 port is a debug port (CMSIS DAP) and is configured
       as a Micro-AB device.
 - I2C controller
     - One I2C bus with connectivity to Arduino headers
 - UART
     - UART (Console): UART1 (Without flow control) for console
 - ARM JTAG support
     - ARM Cortex® 10-pin JTAG connector for LS1012A
     - CMSIS DAP through K20 microcontroller
 - SAI Audio interface
     - One SAI port, SAI 2 with full duplex support
 - Clocks
     - 25 MHz crystal for LS1012A
     - 8 MHz Crystal for K20
     - 24 MHz for SC16IS740IPW SPI to Dual UART bridge
 - Power Supplies
     - 5 V input supply from USB
     - 0.9 V, 1.35 V, and 1.8 V for VDD/Core, DDR, I/O, and
       other board interfaces

Booting Options
---------------
QSPI Flash 1

QSPI flash map
--------------
Images		| Size	|QSPI Flash Address
------------------------------------------
RCW + PBI	| 1MB	| 0x4000_0000
U-boot 		| 1MB	| 0x4010_0000
U-boot Env 	| 1MB	| 0x4020_0000
PPA FIT image	| 2MB	| 0x4050_0000
Linux ITB	| ~53MB | 0x40A0_0000