mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 00:21:06 +00:00
9efaca3e84
Don't store it in a u32.
Don't dereference the bus address as if it were a virtual address
(fixes 284231e49a ("ahci: Support splitting of read transactions
into multiple chunks")).
Fixes crash on boot in MPC8641HPCN_36BIT target.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Cc: Vadim Bendebury <vbendeb@chromium.org>
Acked-by: York Sun <yorksun@freescale.com>
87 lines
2.1 KiB
C
87 lines
2.1 KiB
C
#include <common.h>
|
|
#include <ahci.h>
|
|
#include <scsi.h>
|
|
#include <errno.h>
|
|
#include <asm/io.h>
|
|
#include <asm/gpio.h>
|
|
|
|
#define AHCI_PHYCS0R 0x00c0
|
|
#define AHCI_PHYCS1R 0x00c4
|
|
#define AHCI_PHYCS2R 0x00c8
|
|
#define AHCI_RWCR 0x00fc
|
|
|
|
/* This magic PHY initialisation was taken from the Allwinner releases
|
|
* and Linux driver, but is completely undocumented.
|
|
*/
|
|
static int sunxi_ahci_phy_init(u32 base)
|
|
{
|
|
u8 *reg_base = (u8 *)base;
|
|
u32 reg_val;
|
|
int timeout;
|
|
|
|
writel(0, reg_base + AHCI_RWCR);
|
|
mdelay(5);
|
|
|
|
setbits_le32(reg_base + AHCI_PHYCS1R, 0x1 << 19);
|
|
clrsetbits_le32(reg_base + AHCI_PHYCS0R,
|
|
(0x7 << 24),
|
|
(0x5 << 24) | (0x1 << 23) | (0x1 << 18));
|
|
clrsetbits_le32(reg_base + AHCI_PHYCS1R,
|
|
(0x3 << 16) | (0x1f << 8) | (0x3 << 6),
|
|
(0x2 << 16) | (0x6 << 8) | (0x2 << 6));
|
|
setbits_le32(reg_base + AHCI_PHYCS1R, (0x1 << 28) | (0x1 << 15));
|
|
clrbits_le32(reg_base + AHCI_PHYCS1R, (0x1 << 19));
|
|
clrsetbits_le32(reg_base + AHCI_PHYCS0R, (0x7 << 20), (0x3 << 20));
|
|
clrsetbits_le32(reg_base + AHCI_PHYCS2R, (0x1f << 5), (0x19 << 5));
|
|
mdelay(5);
|
|
|
|
setbits_le32(reg_base + AHCI_PHYCS0R, (0x1 << 19));
|
|
|
|
timeout = 250; /* Power up takes approx 50 us */
|
|
for (;;) {
|
|
reg_val = readl(reg_base + AHCI_PHYCS0R) & (0x7 << 28);
|
|
if (reg_val == (0x2 << 28))
|
|
break;
|
|
if (--timeout == 0) {
|
|
printf("AHCI PHY power up failed.\n");
|
|
return -EIO;
|
|
}
|
|
udelay(1);
|
|
};
|
|
|
|
setbits_le32(reg_base + AHCI_PHYCS2R, (0x1 << 24));
|
|
|
|
timeout = 100; /* Calibration takes approx 10 us */
|
|
for (;;) {
|
|
reg_val = readl(reg_base + AHCI_PHYCS2R) & (0x1 << 24);
|
|
if (reg_val == 0x0)
|
|
break;
|
|
if (--timeout == 0) {
|
|
printf("AHCI PHY calibration failed.\n");
|
|
return -EIO;
|
|
}
|
|
udelay(1);
|
|
}
|
|
|
|
mdelay(15);
|
|
|
|
writel(0x7, reg_base + AHCI_RWCR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void scsi_init(void)
|
|
{
|
|
printf("SUNXI SCSI INIT\n");
|
|
#ifdef CONFIG_SATAPWR
|
|
gpio_request(CONFIG_SATAPWR, "satapwr");
|
|
gpio_direction_output(CONFIG_SATAPWR, 1);
|
|
/* Give attached sata device time to power-up to avoid link timeouts */
|
|
mdelay(500);
|
|
#endif
|
|
|
|
if (sunxi_ahci_phy_init(SUNXI_SATA_BASE) < 0)
|
|
return;
|
|
|
|
ahci_init((void __iomem *)SUNXI_SATA_BASE);
|
|
}
|