Nishanth Menon a818097a33 ARM: OMAP5: Enable ABB configuration for MM voltage domain ... Since we setup the voltage and frequency for the MM domain, we *must* setup the ABB configuration needed for the domain as well. If we do not do this, kernel configuring just the frequency using the default boot loader configured voltage can fail on many corner lot units. Reported-by: Richard Woodruff <r-woodruff2@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com>		2016-04-25 15:10:40 -04:00
..
abb.c	DRA7: add ABB setup for MPU voltage domain	2014-01-24 11:41:17 -05:00
boot.c	omap5: Definitions for SYS_BOOT-based fallback boot device selection	2015-07-27 15:02:09 -04:00
config.mk	kbuild: use shorten logs for mkimage rules	2014-02-25 11:01:29 -05:00
dra7xx_iodelay.c	ARM: OMAP5/DRA7: Expose do_set_iodelay	2016-03-27 09:12:15 -04:00
emif.c	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
hw_data.c	ARM: OMAP5: Enable ABB configuration for MM voltage domain	2016-04-25 15:10:40 -04:00
hwinit.c	ARM: DRA72x: Add support for detection of SR2.0	2016-03-27 09:12:12 -04:00
Kconfig	ARM: DRA7: Enable EEPROM support	2016-03-14 19:18:50 -04:00
Makefile	omap5: Definitions for SYS_BOOT-based fallback boot device selection	2015-07-27 15:02:09 -04:00
prcm-regs.c	ARM: OMAP5: Enable ABB configuration for MM voltage domain	2016-04-25 15:10:40 -04:00
sdram.c	ARM: DRA72: sdram: Update sdram ext phy configuration for SR2.0	2016-03-27 09:12:14 -04:00