Nishanth Menon a818097a33 ARM: OMAP5: Enable ABB configuration for MM voltage domain ... Since we setup the voltage and frequency for the MM domain, we *must* setup the ABB configuration needed for the domain as well. If we do not do this, kernel configuring just the frequency using the default boot loader configured voltage can fail on many corner lot units. Reported-by: Richard Woodruff <r-woodruff2@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com>		2016-04-25 15:10:40 -04:00
..
abb.c	replace DIV_ROUND with DIV_ROUND_CLOSEST	2014-11-20 11:28:25 -05:00
boot-common.c	omap3: Use raw SPL by default for mmc1	2016-03-08 15:01:46 -05:00
clocks-common.c	ARM: OMAP5: Enable ABB configuration for MM voltage domain	2016-04-25 15:10:40 -04:00
emif-common.c	arm: omap-common: Guard some parts of the code with CONFIG_OMAP44XX/OMAP54XX	2016-03-16 15:03:48 -04:00
hwinit-common.c	omap-common: Remove deprecated arch_cpu_init code	2016-03-15 15:12:46 -04:00
lowlevel_init.S	omap-common: Common boot code OMAP3 support and cleanup	2015-07-27 15:02:03 -04:00
Makefile	arm: omap-common: do not build timer when CONFIG_TIMER defined	2016-01-20 19:06:21 -07:00
mem-common.c	ARM: omap: clean redundant PISMO_xx macros used in OMAP3	2014-07-25 16:26:12 -04:00
omap-cache.c	am33xx/omap: Allow cache enable for all Sitara/OMAP	2014-06-11 16:25:39 -04:00
pipe3-phy.c	ARM: OMAP5: Add Pipe3 PHY driver	2013-12-04 08:12:08 -05:00
pipe3-phy.h	ARM: OMAP5: Add Pipe3 PHY driver	2013-12-04 08:12:08 -05:00
reset.c	Add GPL-2.0+ SPDX-License-Identifier to source files	2013-07-24 09:44:38 -04:00
sata.c	ahci: mmio_base is a virtual address	2015-04-18 16:54:29 -04:00
timer.c	omap-common/hwinit-common.c: timer_init() doesn't need to touch gd	2015-01-05 15:13:45 -05:00
u-boot-spl.lds	spl: arm: Make sure to include all of the u_boot_list entries	2016-03-16 15:27:55 -04:00
utils.c	armv7: Add missing newline after OMAP die ID	2016-01-20 10:19:38 -05:00
vc.c	ARM: OMAP4+: pmic: Make generic bus init and write functions	2013-06-10 08:43:09 -04:00