u-boot/arch/arm
Michal Simek a7bcd4c32a zynqmp: mp: Add support for booting R5 from any address
Put jump trampoline to TCM at 0 and setup R5 reset address to 0.
Jump trampoline ensures that jump to the right location.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2015-11-19 10:42:45 +01:00
..
cpu zynqmp: mp: Add support for booting R5 from any address 2015-11-19 10:42:45 +01:00
dts ARM: tegra: enable PCI support of p2371-2180 2015-11-12 09:21:06 -07:00
imx-common imx: mx7: compile misc.c for mx7 2015-11-12 17:40:54 +01:00
include spl: change return values of spl_*_load_image() 2015-11-18 14:50:02 -05:00
lib arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD 2015-11-10 15:03:48 +01:00
mach-at91 Various Makefiles: Add SPDX-License-Identifier tags 2015-11-10 09:19:52 -05:00
mach-bcm283x ARM: rpi: add another revision of Raspberry Pi A+ 2015-10-19 08:12:25 +02:00
mach-davinci arm: Remove da830evm board 2015-09-28 10:48:23 -04:00
mach-exynos arm: exynos: clean up checkpatch issues 2015-11-02 10:38:22 +09:00
mach-highbank ARM: highbank: move SoC sources to mach-highbank 2015-02-21 08:23:51 -05:00
mach-integrator integrator: switch to DM serial port 2015-08-12 20:47:49 -04:00
mach-keystone ARM: k2g: add SD card and eMMC support 2015-10-22 14:22:25 -04:00
mach-kirkwood Revive OpenRD targets 2015-11-10 15:04:21 +01:00
mach-mvebu arm: mvebu: a38x: serdes specification cleanup 2015-11-17 23:41:41 +01:00
mach-orion5x arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD 2015-11-10 15:03:48 +01:00
mach-rockchip rockchip: Reconfigure the malloc based to point to system memory 2015-10-03 10:24:33 -06:00
mach-socfpga arm: socfpga: reset: correct dma, qspi, and sdmmc reset bit defines 2015-11-03 17:32:16 +01:00
mach-tegra ARM: tegra: note that p2371-2180 is Jetson TX1 2015-11-12 09:27:16 -07:00
mach-uniphier ARM: uniphier: drop UniPhier specific SMP code 2015-11-11 23:35:35 +09:00
mach-versatile arm: Remove versatileab board 2015-09-11 15:01:25 -04:00
mach-zynq ARM: zynq: Remove zc70x target 2015-11-04 14:49:53 +01:00
mvebu-common arm: mvebu: Move mvebu-common into mach-mvebu 2015-05-05 14:28:29 +02:00
thumb1/include/asm/proc-armv arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD 2015-11-10 15:03:48 +01:00
config.mk arm: Include the .got section in the binary 2015-05-14 18:49:34 -06:00
Kconfig arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD 2015-11-10 15:03:48 +01:00
Kconfig.debug arm: debug: add Kconfig entries for lowlevel debug 2014-10-26 22:23:12 +01:00
Makefile arm: Remove unused reference to nomadik 2015-09-15 15:05:22 -04:00