u-boot/arch/arm/cpu/armv7
Peng Fan a2c74aaf51 imx: mx6ul select SYS_L2CACHE_OFF
i.MX6UL features an Cortex-A7 core, it does not have PL310 as other i.MX6
chips. To Cortex-A7 core, If D-Cache is enabled, L2 Cache is enabled.
There is on specific switch for on/off L2 Cache, so default select
SYS_L2CACHE_OFF.

Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
2015-08-02 11:05:08 +02:00
..
am33xx am33xx: Re-enable SW levelling for DDR2 2015-06-15 10:57:26 -04:00
bcm281xx bcm281xx: add support for "USB OTG clock" 2014-12-29 16:31:23 -05:00
bcmcygnus arm: bcmcygnus: Add bcmcygnus u-architecture 2014-08-30 07:46:40 -04:00
bcmnsp arm: bcmnsp: Add bcmnsp u-architecture 2014-08-30 07:46:40 -04:00
exynos Move default y configs out of arch/board Kconfig 2015-06-25 22:17:55 -04:00
iproc-common arm: iproc: Initial commit of iproc architecture code 2014-08-30 07:46:40 -04:00
kona-common bcm281xx: add support for "USB OTG clock" 2014-12-29 16:31:23 -05:00
ls102xa ARM: Clean up CONFIG_ARMV7_NONSEC/VIRT/PSCI conditions 2015-05-13 09:24:13 -07:00
mx5 arch: Make board selection choices optional 2015-05-12 18:10:02 -04:00
mx6 imx: mx6ul select SYS_L2CACHE_OFF 2015-08-02 11:05:08 +02:00
omap-common ARM: DRA7: emif: Fix DDR init sequence during warm reset 2015-06-15 10:57:27 -04:00
omap3 arch: Make board selection choices optional 2015-05-12 18:10:02 -04:00
omap4 arch: Make board selection choices optional 2015-05-12 18:10:02 -04:00
omap5 ARM: DRA7: Change configuration to prevent DDR reset control from EMIF 2015-06-19 16:46:48 -04:00
rmobile arm: rmobile: alt: Update to QoS revision 0.31 and 0.321 2015-06-01 08:56:34 +09:00
s5p-common armv7: convert makefiles to Kbuild style 2013-10-31 12:53:39 -04:00
s5pc1xx dts: Disable device tree for SPL on all boards 2015-06-10 19:26:55 -06:00
stv0991 stv0991: configure clock & pad muxing for qspi 2015-07-03 13:50:53 +05:30
sunxi sunxi: Add support for UART0 in PB pin group on A33 2015-07-05 11:32:11 +02:00
u8500 armv7: convert makefiles to Kbuild style 2013-10-31 12:53:39 -04:00
vf610 arm: vf610: Add clock support for DSPI 2015-06-08 08:41:55 +02:00
arch_timer.c arm: add support for arch timer 2014-04-17 17:24:38 -04:00
cache_v7.c ARM: cpu: Add ARMv7 barrier operations support 2015-04-16 13:53:26 +02:00
config.mk ARM: move -march=* and -mtune= options to arch/arm/Makefile 2015-03-27 16:55:22 +01:00
cp15.c ARM: Introduce erratum workaround for 454179 2015-03-13 09:28:48 -04:00
cpu.c arm: Allow cleanup_before_linux() without disabling caches 2015-06-10 19:26:54 -06:00
Kconfig tegra: Boot in non-secure mode by default 2015-05-13 09:24:16 -07:00
lowlevel_init.S arm: Reduce the scope of lowlevel_init() 2015-03-04 14:55:04 -05:00
Makefile ARM: Clean up CONFIG_ARMV7_NONSEC/VIRT/PSCI conditions 2015-05-13 09:24:13 -07:00
nonsec_virt.S ARM: HYP/non-sec: Fix the ARCH Timer frequency setting. 2014-12-11 09:41:45 -08:00
psci.S ARM: Put target PC for PSCI CPU_ON on per-CPU stack 2015-05-13 09:24:14 -07:00
start.S armv7: better comment in start.S 2015-07-07 08:04:03 +02:00
syslib.c ARM: OMAP: hide custom bit manipulation function sr32() 2014-04-17 14:39:54 -04:00
virt-dt.c virt-dt: Allow reservation of secure region when in a RAM carveout 2015-05-13 09:24:14 -07:00
virt-v7.c tegra124: Reserve secure RAM using MC_SECURITY_CFG{0, 1}_0 2015-05-13 09:24:15 -07:00