mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 17:58:23 +00:00
07d538d281
Add a clock driver for the MPC83xx architecture. Signed-off-by: Mario Six <mario.six@gdsys.cc>
379 lines
11 KiB
C
379 lines
11 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* (C) Copyright 2018
|
|
* Mario Six, Guntermann & Drunck GmbH, mario.six@gdsys.cc
|
|
*/
|
|
|
|
/**
|
|
* enum ratio - Description of a core clock ratio
|
|
* @RAT_UNK: Unknown ratio
|
|
* @RAT_BYP: Bypass
|
|
* @RAT_1_TO_8: Ratio 1:8
|
|
* @RAT_1_TO_4: Ratio 1:4
|
|
* @RAT_1_TO_2: Ratio 1:2
|
|
* @RAT_1_TO_1: Ratio 1:1
|
|
* @RAT_1_5_TO_1: Ratio 1.5:1
|
|
* @RAT_2_TO_1: Ratio 2:1
|
|
* @RAT_2_5_TO_1: Ratio 2.5:1
|
|
* @RAT_3_TO_1: Ratio 3:1
|
|
*/
|
|
enum ratio {
|
|
RAT_UNK,
|
|
RAT_BYP,
|
|
RAT_1_TO_8,
|
|
RAT_1_TO_4,
|
|
RAT_1_TO_2,
|
|
RAT_1_TO_1,
|
|
RAT_1_5_TO_1,
|
|
RAT_2_TO_1,
|
|
RAT_2_5_TO_1,
|
|
RAT_3_TO_1
|
|
};
|
|
|
|
/**
|
|
* struct corecnf - Description for a core clock configuration
|
|
* @core_csb_ratio: Core clock frequency to CSB clock frequency ratio
|
|
* @vco_divider: VCO divider (Core VCO frequency = Core frequency * VCO divider)
|
|
*/
|
|
struct corecnf {
|
|
int core_csb_ratio;
|
|
int vco_divider;
|
|
};
|
|
|
|
/*
|
|
* Table with all valid Core CSB frequency ratio / VCO divider combinations as
|
|
* indexed by the COREPLL field of the SPMR
|
|
*/
|
|
static const struct corecnf corecnf_tab[] = {
|
|
{RAT_BYP, RAT_BYP}, /* 0x00 */
|
|
{RAT_BYP, RAT_BYP}, /* 0x01 */
|
|
{RAT_BYP, RAT_BYP}, /* 0x02 */
|
|
{RAT_BYP, RAT_BYP}, /* 0x03 */
|
|
{RAT_BYP, RAT_BYP}, /* 0x04 */
|
|
{RAT_BYP, RAT_BYP}, /* 0x05 */
|
|
{RAT_BYP, RAT_BYP}, /* 0x06 */
|
|
{RAT_BYP, RAT_BYP}, /* 0x07 */
|
|
{RAT_1_TO_1, RAT_1_TO_2}, /* 0x08 */
|
|
{RAT_1_TO_1, RAT_1_TO_4}, /* 0x09 */
|
|
{RAT_1_TO_1, RAT_1_TO_8}, /* 0x0A */
|
|
{RAT_1_TO_1, RAT_1_TO_8}, /* 0x0B */
|
|
{RAT_1_5_TO_1, RAT_1_TO_2}, /* 0x0C */
|
|
{RAT_1_5_TO_1, RAT_1_TO_4}, /* 0x0D */
|
|
{RAT_1_5_TO_1, RAT_1_TO_8}, /* 0x0E */
|
|
{RAT_1_5_TO_1, RAT_1_TO_8}, /* 0x0F */
|
|
{RAT_2_TO_1, RAT_1_TO_2}, /* 0x10 */
|
|
{RAT_2_TO_1, RAT_1_TO_4}, /* 0x11 */
|
|
{RAT_2_TO_1, RAT_1_TO_8}, /* 0x12 */
|
|
{RAT_2_TO_1, RAT_1_TO_8}, /* 0x13 */
|
|
{RAT_2_5_TO_1, RAT_1_TO_2}, /* 0x14 */
|
|
{RAT_2_5_TO_1, RAT_1_TO_4}, /* 0x15 */
|
|
{RAT_2_5_TO_1, RAT_1_TO_8}, /* 0x16 */
|
|
{RAT_2_5_TO_1, RAT_1_TO_8}, /* 0x17 */
|
|
{RAT_3_TO_1, RAT_1_TO_2}, /* 0x18 */
|
|
{RAT_3_TO_1, RAT_1_TO_4}, /* 0x19 */
|
|
{RAT_3_TO_1, RAT_1_TO_8}, /* 0x1A */
|
|
{RAT_3_TO_1, RAT_1_TO_8}, /* 0x1B */
|
|
};
|
|
|
|
/**
|
|
* enum reg_type - Register to read a field from
|
|
* @REG_SCCR: Use the SCCR register
|
|
* @REG_SPMR: Use the SPMR register
|
|
*/
|
|
enum reg_type {
|
|
REG_SCCR,
|
|
REG_SPMR,
|
|
};
|
|
|
|
/**
|
|
* enum mode_type - Description of how to read a specific frequency value
|
|
* @TYPE_INVALID: Unknown type, will provoke error
|
|
* @TYPE_SCCR_STANDARD: Read a field from the SCCR register, and use it
|
|
* as a divider for the CSB clock to compute the
|
|
* frequency
|
|
* @TYPE_SCCR_ONOFF: The field describes a bit flag that can turn the
|
|
* clock on or off
|
|
* @TYPE_SPMR_DIRECT_MULTIPLY: Read a field from the SPMR register, and use it
|
|
* as a multiplier for the CSB clock to compute the
|
|
* frequency
|
|
* @TYPE_SPECIAL: The frequency is calculated in a non-standard way
|
|
*/
|
|
enum mode_type {
|
|
TYPE_INVALID = 0,
|
|
TYPE_SCCR_STANDARD,
|
|
TYPE_SCCR_ONOFF,
|
|
TYPE_SPMR_DIRECT_MULTIPLY,
|
|
TYPE_SPECIAL,
|
|
};
|
|
|
|
/* Map of each clock index to its human-readable name */
|
|
static const char * const names[] = {
|
|
[MPC83XX_CLK_CORE] = "Core",
|
|
[MPC83XX_CLK_CSB] = "Coherent System Bus",
|
|
[MPC83XX_CLK_QE] = "QE",
|
|
[MPC83XX_CLK_BRG] = "BRG",
|
|
[MPC83XX_CLK_LBIU] = "Local Bus Controller",
|
|
[MPC83XX_CLK_LCLK] = "Local Bus",
|
|
[MPC83XX_CLK_MEM] = "DDR",
|
|
[MPC83XX_CLK_MEM_SEC] = "DDR Secondary",
|
|
[MPC83XX_CLK_ENC] = "SEC",
|
|
[MPC83XX_CLK_I2C1] = "I2C1",
|
|
[MPC83XX_CLK_I2C2] = "I2C2",
|
|
[MPC83XX_CLK_TDM] = "TDM",
|
|
[MPC83XX_CLK_SDHC] = "SDHC",
|
|
[MPC83XX_CLK_TSEC1] = "TSEC1",
|
|
[MPC83XX_CLK_TSEC2] = "TSEC2",
|
|
[MPC83XX_CLK_USBDR] = "USB DR",
|
|
[MPC83XX_CLK_USBMPH] = "USB MPH",
|
|
[MPC83XX_CLK_PCIEXP1] = "PCIEXP1",
|
|
[MPC83XX_CLK_PCIEXP2] = "PCIEXP2",
|
|
[MPC83XX_CLK_SATA] = "SATA",
|
|
[MPC83XX_CLK_DMAC] = "DMAC",
|
|
[MPC83XX_CLK_PCI] = "PCI",
|
|
};
|
|
|
|
/**
|
|
* struct clk_mode - Structure for clock mode descriiptions
|
|
* @low: The low bit of the data field to read for this mode (may not apply to
|
|
* some modes)
|
|
* @high: The high bit of the data field to read for this mode (may not apply to
|
|
* some modes)
|
|
* @type: The type of the mode description (one of enum mode_type)
|
|
*/
|
|
struct clk_mode {
|
|
u8 low;
|
|
u8 high;
|
|
int type;
|
|
};
|
|
|
|
/**
|
|
* set_mode() - Build a clock mode description from data
|
|
* @mode: The clock mode description to be filled out
|
|
* @low: The low bit of the data field to read for this mode (may not apply to
|
|
* some modes)
|
|
* @high: The high bit of the data field to read for this mode (may not apply to
|
|
* some modes)
|
|
* @type: The type of the mode description (one of enum mode_type)
|
|
*
|
|
* Clock mode descriptions are a succinct description of how to read a specific
|
|
* clock's rate from the hardware; usually by reading a specific field of a
|
|
* register, such a s the SCCR register, but some types use different methods
|
|
* for obtaining the clock rate.
|
|
*/
|
|
static void set_mode(struct clk_mode *mode, u8 low, u8 high, int type)
|
|
{
|
|
mode->low = low;
|
|
mode->high = high;
|
|
mode->type = type;
|
|
}
|
|
|
|
/**
|
|
* retrieve_mode() - Get the clock mode description for a specific clock
|
|
* @clk: The identifier of the clock for which the clock description should
|
|
* be retrieved
|
|
* @soc_type: The type of MPC83xx SoC for which the clock description should be
|
|
* retrieved
|
|
* @mode: Pointer to a clk_mode structure to be filled with data for the
|
|
* clock
|
|
*
|
|
* Since some clock rate are stored in different places on different MPC83xx
|
|
* SoCs, the SoC type has to be supplied along with the clock's identifier.
|
|
*
|
|
* Return: 0 if OK, -ve on error
|
|
*/
|
|
static int retrieve_mode(int clk, int soc_type, struct clk_mode *mode)
|
|
{
|
|
switch (clk) {
|
|
case MPC83XX_CLK_CORE:
|
|
case MPC83XX_CLK_CSB:
|
|
case MPC83XX_CLK_QE:
|
|
case MPC83XX_CLK_BRG:
|
|
case MPC83XX_CLK_LCLK:
|
|
case MPC83XX_CLK_I2C2:
|
|
set_mode(mode, 0, 0, TYPE_SPECIAL);
|
|
break;
|
|
case MPC83XX_CLK_MEM:
|
|
set_mode(mode, 1, 1, TYPE_SPMR_DIRECT_MULTIPLY);
|
|
break;
|
|
case MPC83XX_CLK_LBIU:
|
|
case MPC83XX_CLK_MEM_SEC:
|
|
set_mode(mode, 0, 0, TYPE_SPMR_DIRECT_MULTIPLY);
|
|
break;
|
|
case MPC83XX_CLK_TSEC1:
|
|
set_mode(mode, 0, 1, TYPE_SCCR_STANDARD);
|
|
break;
|
|
case MPC83XX_CLK_TSEC2:
|
|
if (soc_type == SOC_MPC8313) /* I2C and TSEC2 are the same register */
|
|
set_mode(mode, 2, 3, TYPE_SCCR_STANDARD);
|
|
else /* FIXME(mario.six@gdsys.cc): This has separate enable/disable bit! */
|
|
set_mode(mode, 0, 1, TYPE_SCCR_STANDARD);
|
|
break;
|
|
case MPC83XX_CLK_SDHC:
|
|
set_mode(mode, 4, 5, TYPE_SCCR_STANDARD);
|
|
break;
|
|
case MPC83XX_CLK_ENC:
|
|
set_mode(mode, 6, 7, TYPE_SCCR_STANDARD);
|
|
break;
|
|
case MPC83XX_CLK_I2C1:
|
|
if (soc_type == SOC_MPC8349)
|
|
set_mode(mode, 2, 3, TYPE_SCCR_STANDARD);
|
|
else /* I2C and ENC are the same register */
|
|
set_mode(mode, 6, 7, TYPE_SCCR_STANDARD);
|
|
break;
|
|
case MPC83XX_CLK_PCIEXP1:
|
|
set_mode(mode, 10, 11, TYPE_SCCR_STANDARD);
|
|
break;
|
|
case MPC83XX_CLK_PCIEXP2:
|
|
set_mode(mode, 12, 13, TYPE_SCCR_STANDARD);
|
|
break;
|
|
case MPC83XX_CLK_USBDR:
|
|
if (soc_type == SOC_MPC8313 || soc_type == SOC_MPC8349)
|
|
set_mode(mode, 10, 11, TYPE_SCCR_STANDARD);
|
|
else
|
|
set_mode(mode, 8, 9, TYPE_SCCR_STANDARD);
|
|
break;
|
|
case MPC83XX_CLK_USBMPH:
|
|
set_mode(mode, 8, 9, TYPE_SCCR_STANDARD);
|
|
break;
|
|
case MPC83XX_CLK_PCI:
|
|
set_mode(mode, 15, 15, TYPE_SCCR_ONOFF);
|
|
break;
|
|
case MPC83XX_CLK_DMAC:
|
|
set_mode(mode, 26, 27, TYPE_SCCR_STANDARD);
|
|
break;
|
|
case MPC83XX_CLK_SATA:
|
|
/* FIXME(mario.six@gdsys.cc): All SATA controllers must have the same clock ratio */
|
|
if (soc_type == SOC_MPC8379) {
|
|
set_mode(mode, 24, 25, TYPE_SCCR_STANDARD);
|
|
set_mode(mode, 26, 27, TYPE_SCCR_STANDARD);
|
|
set_mode(mode, 28, 29, TYPE_SCCR_STANDARD);
|
|
set_mode(mode, 30, 31, TYPE_SCCR_STANDARD);
|
|
} else {
|
|
set_mode(mode, 18, 19, TYPE_SCCR_STANDARD);
|
|
set_mode(mode, 20, 21, TYPE_SCCR_STANDARD);
|
|
}
|
|
break;
|
|
case MPC83XX_CLK_TDM:
|
|
set_mode(mode, 26, 27, TYPE_SCCR_STANDARD);
|
|
break;
|
|
default:
|
|
debug("%s: Unknown clock type %d on soc type %d\n",
|
|
__func__, clk, soc_type);
|
|
set_mode(mode, 0, 0, TYPE_INVALID);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* get_spmr() - Read the SPMR (System PLL Mode Register)
|
|
* @im: Pointer to the MPC83xx main register map in question
|
|
*
|
|
* Return: The SPMR value as a 32-bit number.
|
|
*/
|
|
static inline u32 get_spmr(immap_t *im)
|
|
{
|
|
u32 res = in_be32(&im->clk.spmr);
|
|
|
|
return res;
|
|
}
|
|
|
|
/**
|
|
* get_sccr() - Read the SCCR (System Clock Control Register)
|
|
* @im: Pointer to the MPC83xx main register map in question
|
|
*
|
|
* Return: The SCCR value as a 32-bit number.
|
|
*/
|
|
static inline u32 get_sccr(immap_t *im)
|
|
{
|
|
u32 res = in_be32(&im->clk.sccr);
|
|
|
|
return res;
|
|
}
|
|
|
|
/**
|
|
* get_lcrr() - Read the LCRR (Clock Ratio Register)
|
|
* @im: Pointer to the MPC83xx main register map in question
|
|
*
|
|
* Return: The LCRR value as a 32-bit number.
|
|
*/
|
|
static inline u32 get_lcrr(immap_t *im)
|
|
{
|
|
u32 res = in_be32(&im->im_lbc.lcrr);
|
|
|
|
return res;
|
|
}
|
|
|
|
/**
|
|
* get_pci_sync_in() - Read the PCI synchronization clock speed
|
|
* @im: Pointer to the MPC83xx main register map in question
|
|
*
|
|
* Return: The PCI synchronization clock speed value as a 32-bit number.
|
|
*/
|
|
static inline u32 get_pci_sync_in(immap_t *im)
|
|
{
|
|
u8 clkin_div;
|
|
|
|
clkin_div = (get_spmr(im) & SPMR_CKID) >> SPMR_CKID_SHIFT;
|
|
return CONFIG_SYS_CLK_FREQ / (1 + clkin_div);
|
|
}
|
|
|
|
/**
|
|
* get_csb_clk() - Read the CSB (Coheren System Bus) clock speed
|
|
* @im: Pointer to the MPC83xx main register map in question
|
|
*
|
|
* Return: The CSB clock speed value as a 32-bit number.
|
|
*/
|
|
static inline u32 get_csb_clk(immap_t *im)
|
|
{
|
|
u8 spmf;
|
|
|
|
spmf = (get_spmr(im) & SPMR_SPMF) >> SPMR_SPMF_SHIFT;
|
|
return CONFIG_SYS_CLK_FREQ * spmf;
|
|
}
|
|
|
|
/**
|
|
* spmr_field() - Read a specific SPMR field
|
|
* @im: Pointer to the MPC83xx main register map in question
|
|
* @mask: A bitmask that describes the bitfield to be read
|
|
*
|
|
* Return: The value of the bit field as a 32-bit number.
|
|
*/
|
|
static inline uint spmr_field(immap_t *im, u32 mask)
|
|
{
|
|
/* Extract shift from bitmask */
|
|
uint shift = mask ? ffs(mask) - 1 : 0;
|
|
|
|
return (get_spmr(im) & mask) >> shift;
|
|
}
|
|
|
|
/**
|
|
* sccr_field() - Read a specific SCCR field
|
|
* @im: Pointer to the MPC83xx main register map in question
|
|
* @mask: A bitmask that describes the bitfield to be read
|
|
*
|
|
* Return: The value of the bit field as a 32-bit number.
|
|
*/
|
|
static inline uint sccr_field(immap_t *im, u32 mask)
|
|
{
|
|
/* Extract shift from bitmask */
|
|
uint shift = mask ? ffs(mask) - 1 : 0;
|
|
|
|
return (get_sccr(im) & mask) >> shift;
|
|
}
|
|
|
|
/**
|
|
* lcrr_field() - Read a specific LCRR field
|
|
* @im: Pointer to the MPC83xx main register map in question
|
|
* @mask: A bitmask that describes the bitfield to be read
|
|
*
|
|
* Return: The value of the bit field as a 32-bit number.
|
|
*/
|
|
static inline uint lcrr_field(immap_t *im, u32 mask)
|
|
{
|
|
/* Extract shift from bitmask */
|
|
uint shift = mask ? ffs(mask) - 1 : 0;
|
|
|
|
return (get_lcrr(im) & mask) >> shift;
|
|
}
|