mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
7f900eabf7
Now that everything is prepared, copy the fsl-ls1028a.dtsi from the linux kernel v5.14.12. Notable changes: - second watchdog added - the number of chip selects of the SPI controller is now correct and reflects what the hardware offers - the LPUARTs have the correct clock parent - USB controllers are enabled by default, which was already the case before this sync because all board enabled all the USB controller nodes. A linux patch to fix this is pending. - the eSDHC controller changes from big-endian to little-endian, but that property seems to be not used at all. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
1162 lines
33 KiB
Text
1162 lines
33 KiB
Text
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Device Tree Include file for NXP Layerscape-1028A family SoC.
|
|
*
|
|
* Copyright 2018-2020 NXP
|
|
*
|
|
* Harninder Rai <harninder.rai@nxp.com>
|
|
*
|
|
*/
|
|
|
|
#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/thermal/thermal.h>
|
|
|
|
/ {
|
|
compatible = "fsl,ls1028a";
|
|
interrupt-parent = <&gic>;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu0: cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a72";
|
|
reg = <0x0>;
|
|
enable-method = "psci";
|
|
clocks = <&clockgen QORIQ_CLK_CMUX 0>;
|
|
next-level-cache = <&l2>;
|
|
cpu-idle-states = <&CPU_PW20>;
|
|
#cooling-cells = <2>;
|
|
};
|
|
|
|
cpu1: cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a72";
|
|
reg = <0x1>;
|
|
enable-method = "psci";
|
|
clocks = <&clockgen QORIQ_CLK_CMUX 0>;
|
|
next-level-cache = <&l2>;
|
|
cpu-idle-states = <&CPU_PW20>;
|
|
#cooling-cells = <2>;
|
|
};
|
|
|
|
l2: l2-cache {
|
|
compatible = "cache";
|
|
};
|
|
};
|
|
|
|
idle-states {
|
|
/*
|
|
* PSCI node is not added default, U-boot will add missing
|
|
* parts if it determines to use PSCI.
|
|
*/
|
|
entry-method = "psci";
|
|
|
|
CPU_PW20: cpu-pw20 {
|
|
compatible = "arm,idle-state";
|
|
idle-state-name = "PW20";
|
|
arm,psci-suspend-param = <0x0>;
|
|
entry-latency-us = <2000>;
|
|
exit-latency-us = <2000>;
|
|
min-residency-us = <6000>;
|
|
};
|
|
};
|
|
|
|
sysclk: sysclk {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <100000000>;
|
|
clock-output-names = "sysclk";
|
|
};
|
|
|
|
osc_27m: clock-osc-27m {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <27000000>;
|
|
clock-output-names = "phy_27m";
|
|
};
|
|
|
|
dpclk: clock-controller@f1f0000 {
|
|
compatible = "fsl,ls1028a-plldig";
|
|
reg = <0x0 0xf1f0000 0x0 0xffff>;
|
|
#clock-cells = <0>;
|
|
clocks = <&osc_27m>;
|
|
};
|
|
|
|
firmware {
|
|
optee: optee {
|
|
compatible = "linaro,optee-tz";
|
|
method = "smc";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
reboot {
|
|
compatible ="syscon-reboot";
|
|
regmap = <&rst>;
|
|
offset = <0>;
|
|
mask = <0x02>;
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv8-timer";
|
|
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
|
|
IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
|
|
IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
|
|
IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
|
|
IRQ_TYPE_LEVEL_LOW)>;
|
|
};
|
|
|
|
pmu {
|
|
compatible = "arm,cortex-a72-pmu";
|
|
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
gic: interrupt-controller@6000000 {
|
|
compatible= "arm,gic-v3";
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
reg= <0x0 0x06000000 0 0x10000>, /* GIC Dist */
|
|
<0x0 0x06040000 0 0x40000>; /* GIC Redistributor */
|
|
#interrupt-cells= <3>;
|
|
interrupt-controller;
|
|
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) |
|
|
IRQ_TYPE_LEVEL_LOW)>;
|
|
its: gic-its@6020000 {
|
|
compatible = "arm,gic-v3-its";
|
|
msi-controller;
|
|
reg = <0x0 0x06020000 0 0x20000>;/* GIC Translater */
|
|
};
|
|
};
|
|
|
|
thermal-zones {
|
|
ddr-controller {
|
|
polling-delay-passive = <1000>;
|
|
polling-delay = <5000>;
|
|
thermal-sensors = <&tmu 0>;
|
|
|
|
trips {
|
|
ddr-ctrler-alert {
|
|
temperature = <85000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
|
|
ddr-ctrler-crit {
|
|
temperature = <95000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
|
|
core-cluster {
|
|
polling-delay-passive = <1000>;
|
|
polling-delay = <5000>;
|
|
thermal-sensors = <&tmu 1>;
|
|
|
|
trips {
|
|
core_cluster_alert: core-cluster-alert {
|
|
temperature = <85000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
|
|
core_cluster_crit: core-cluster-crit {
|
|
temperature = <95000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
|
|
cooling-maps {
|
|
map0 {
|
|
trip = <&core_cluster_alert>;
|
|
cooling-device =
|
|
<&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
|
<&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
soc: soc {
|
|
compatible = "simple-bus";
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
ddr: memory-controller@1080000 {
|
|
compatible = "fsl,qoriq-memory-controller";
|
|
reg = <0x0 0x1080000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
|
|
little-endian;
|
|
};
|
|
|
|
dcfg: syscon@1e00000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,ls1028a-dcfg", "syscon", "simple-mfd";
|
|
reg = <0x0 0x1e00000 0x0 0x10000>;
|
|
ranges = <0x0 0x0 0x1e00000 0x10000>;
|
|
little-endian;
|
|
|
|
fspi_clk: clock-controller@900 {
|
|
compatible = "fsl,ls1028a-flexspi-clk";
|
|
reg = <0x900 0x4>;
|
|
#clock-cells = <0>;
|
|
clocks = <&clockgen QORIQ_CLK_HWACCEL 0>;
|
|
clock-output-names = "fspi_clk";
|
|
};
|
|
};
|
|
|
|
rst: syscon@1e60000 {
|
|
compatible = "syscon";
|
|
reg = <0x0 0x1e60000 0x0 0x10000>;
|
|
little-endian;
|
|
};
|
|
|
|
scfg: syscon@1fc0000 {
|
|
compatible = "fsl,ls1028a-scfg", "syscon";
|
|
reg = <0x0 0x1fc0000 0x0 0x10000>;
|
|
big-endian;
|
|
};
|
|
|
|
clockgen: clock-controller@1300000 {
|
|
compatible = "fsl,ls1028a-clockgen";
|
|
reg = <0x0 0x1300000 0x0 0xa0000>;
|
|
#clock-cells = <2>;
|
|
clocks = <&sysclk>;
|
|
};
|
|
|
|
i2c0: i2c@2000000 {
|
|
compatible = "fsl,vf610-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x2000000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(4)>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@2010000 {
|
|
compatible = "fsl,vf610-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x2010000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(4)>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c2: i2c@2020000 {
|
|
compatible = "fsl,vf610-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x2020000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(4)>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c3: i2c@2030000 {
|
|
compatible = "fsl,vf610-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x2030000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(4)>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c4: i2c@2040000 {
|
|
compatible = "fsl,vf610-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x2040000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(4)>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c5: i2c@2050000 {
|
|
compatible = "fsl,vf610-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x2050000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(4)>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c6: i2c@2060000 {
|
|
compatible = "fsl,vf610-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x2060000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(4)>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c7: i2c@2070000 {
|
|
compatible = "fsl,vf610-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x2070000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(4)>;
|
|
status = "disabled";
|
|
};
|
|
|
|
fspi: spi@20c0000 {
|
|
compatible = "nxp,lx2160a-fspi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x20c0000 0x0 0x10000>,
|
|
<0x0 0x20000000 0x0 0x10000000>;
|
|
reg-names = "fspi_base", "fspi_mmap";
|
|
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&fspi_clk>, <&fspi_clk>;
|
|
clock-names = "fspi_en", "fspi";
|
|
status = "disabled";
|
|
};
|
|
|
|
dspi0: spi@2100000 {
|
|
compatible = "fsl,ls1028a-dspi", "fsl,ls1021a-v1.0-dspi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x2100000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-names = "dspi";
|
|
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(2)>;
|
|
dmas = <&edma0 0 62>, <&edma0 0 60>;
|
|
dma-names = "tx", "rx";
|
|
spi-num-chipselects = <4>;
|
|
little-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
dspi1: spi@2110000 {
|
|
compatible = "fsl,ls1028a-dspi", "fsl,ls1021a-v1.0-dspi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x2110000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-names = "dspi";
|
|
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(2)>;
|
|
dmas = <&edma0 0 58>, <&edma0 0 56>;
|
|
dma-names = "tx", "rx";
|
|
spi-num-chipselects = <4>;
|
|
little-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
dspi2: spi@2120000 {
|
|
compatible = "fsl,ls1028a-dspi", "fsl,ls1021a-v1.0-dspi";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x0 0x2120000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-names = "dspi";
|
|
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(2)>;
|
|
dmas = <&edma0 0 54>, <&edma0 0 2>;
|
|
dma-names = "tx", "rx";
|
|
spi-num-chipselects = <3>;
|
|
little-endian;
|
|
status = "disabled";
|
|
};
|
|
|
|
esdhc: mmc@2140000 {
|
|
compatible = "fsl,ls1028a-esdhc", "fsl,esdhc";
|
|
reg = <0x0 0x2140000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-frequency = <0>; /* fixed up by bootloader */
|
|
clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
|
|
voltage-ranges = <1800 1800 3300 3300>;
|
|
sdhci,auto-cmd12;
|
|
little-endian;
|
|
bus-width = <4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
esdhc1: mmc@2150000 {
|
|
compatible = "fsl,ls1028a-esdhc", "fsl,esdhc";
|
|
reg = <0x0 0x2150000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-frequency = <0>; /* fixed up by bootloader */
|
|
clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
|
|
voltage-ranges = <1800 1800>;
|
|
sdhci,auto-cmd12;
|
|
non-removable;
|
|
little-endian;
|
|
bus-width = <4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
can0: can@2180000 {
|
|
compatible = "fsl,lx2160ar1-flexcan";
|
|
reg = <0x0 0x2180000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(2)>,
|
|
<&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(2)>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
can1: can@2190000 {
|
|
compatible = "fsl,lx2160ar1-flexcan";
|
|
reg = <0x0 0x2190000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(2)>,
|
|
<&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(2)>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
duart0: serial@21c0500 {
|
|
compatible = "fsl,ns16550", "ns16550a";
|
|
reg = <0x00 0x21c0500 0x0 0x100>;
|
|
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(2)>;
|
|
status = "disabled";
|
|
};
|
|
|
|
duart1: serial@21c0600 {
|
|
compatible = "fsl,ns16550", "ns16550a";
|
|
reg = <0x00 0x21c0600 0x0 0x100>;
|
|
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(2)>;
|
|
status = "disabled";
|
|
};
|
|
|
|
|
|
lpuart0: serial@2260000 {
|
|
compatible = "fsl,ls1028a-lpuart";
|
|
reg = <0x0 0x2260000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(2)>;
|
|
clock-names = "ipg";
|
|
dma-names = "rx","tx";
|
|
dmas = <&edma0 1 32>,
|
|
<&edma0 1 33>;
|
|
status = "disabled";
|
|
};
|
|
|
|
lpuart1: serial@2270000 {
|
|
compatible = "fsl,ls1028a-lpuart";
|
|
reg = <0x0 0x2270000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(2)>;
|
|
clock-names = "ipg";
|
|
dma-names = "rx","tx";
|
|
dmas = <&edma0 1 30>,
|
|
<&edma0 1 31>;
|
|
status = "disabled";
|
|
};
|
|
|
|
lpuart2: serial@2280000 {
|
|
compatible = "fsl,ls1028a-lpuart";
|
|
reg = <0x0 0x2280000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(2)>;
|
|
clock-names = "ipg";
|
|
dma-names = "rx","tx";
|
|
dmas = <&edma0 1 28>,
|
|
<&edma0 1 29>;
|
|
status = "disabled";
|
|
};
|
|
|
|
lpuart3: serial@2290000 {
|
|
compatible = "fsl,ls1028a-lpuart";
|
|
reg = <0x0 0x2290000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(2)>;
|
|
clock-names = "ipg";
|
|
dma-names = "rx","tx";
|
|
dmas = <&edma0 1 26>,
|
|
<&edma0 1 27>;
|
|
status = "disabled";
|
|
};
|
|
|
|
lpuart4: serial@22a0000 {
|
|
compatible = "fsl,ls1028a-lpuart";
|
|
reg = <0x0 0x22a0000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(2)>;
|
|
clock-names = "ipg";
|
|
dma-names = "rx","tx";
|
|
dmas = <&edma0 1 24>,
|
|
<&edma0 1 25>;
|
|
status = "disabled";
|
|
};
|
|
|
|
lpuart5: serial@22b0000 {
|
|
compatible = "fsl,ls1028a-lpuart";
|
|
reg = <0x0 0x22b0000 0x0 0x1000>;
|
|
interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(2)>;
|
|
clock-names = "ipg";
|
|
dma-names = "rx","tx";
|
|
dmas = <&edma0 1 22>,
|
|
<&edma0 1 23>;
|
|
status = "disabled";
|
|
};
|
|
|
|
edma0: dma-controller@22c0000 {
|
|
#dma-cells = <2>;
|
|
compatible = "fsl,ls1028a-edma", "fsl,vf610-edma";
|
|
reg = <0x0 0x22c0000 0x0 0x10000>,
|
|
<0x0 0x22d0000 0x0 0x10000>,
|
|
<0x0 0x22e0000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "edma-tx", "edma-err";
|
|
dma-channels = <32>;
|
|
clock-names = "dmamux0", "dmamux1";
|
|
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(2)>,
|
|
<&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(2)>;
|
|
};
|
|
|
|
gpio1: gpio@2300000 {
|
|
compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio";
|
|
reg = <0x0 0x2300000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
little-endian;
|
|
};
|
|
|
|
gpio2: gpio@2310000 {
|
|
compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio";
|
|
reg = <0x0 0x2310000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
little-endian;
|
|
};
|
|
|
|
gpio3: gpio@2320000 {
|
|
compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio";
|
|
reg = <0x0 0x2320000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
little-endian;
|
|
};
|
|
|
|
usb0: usb@3100000 {
|
|
compatible = "fsl,ls1028a-dwc3", "snps,dwc3";
|
|
reg = <0x0 0x3100000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
|
|
dr_mode = "host";
|
|
snps,dis_rxdet_inp3_quirk;
|
|
snps,quirk-frame-length-adjustment = <0x20>;
|
|
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
|
|
};
|
|
|
|
usb1: usb@3110000 {
|
|
compatible = "fsl,ls1028a-dwc3", "snps,dwc3";
|
|
reg = <0x0 0x3110000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
|
|
dr_mode = "host";
|
|
snps,dis_rxdet_inp3_quirk;
|
|
snps,quirk-frame-length-adjustment = <0x20>;
|
|
snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
|
|
};
|
|
|
|
sata: sata@3200000 {
|
|
compatible = "fsl,ls1028a-ahci";
|
|
reg = <0x0 0x3200000 0x0 0x10000>,
|
|
<0x7 0x100520 0x0 0x4>;
|
|
reg-names = "ahci", "sata-ecc";
|
|
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(2)>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pcie1: pcie@3400000 {
|
|
compatible = "fsl,ls1028a-pcie";
|
|
reg = <0x00 0x03400000 0x0 0x00100000>, /* controller registers */
|
|
<0x80 0x00000000 0x0 0x00002000>; /* configuration space */
|
|
reg-names = "regs", "config";
|
|
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
|
|
<GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */
|
|
interrupt-names = "pme", "aer";
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
device_type = "pci";
|
|
dma-coherent;
|
|
num-viewport = <8>;
|
|
bus-range = <0x0 0xff>;
|
|
ranges = <0x81000000 0x0 0x00000000 0x80 0x00010000 0x0 0x00010000 /* downstream I/O */
|
|
0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
|
|
msi-parent = <&its>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0 0 0 7>;
|
|
interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0000 0 0 2 &gic 0 0 GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0000 0 0 3 &gic 0 0 GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0000 0 0 4 &gic 0 0 GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
|
|
iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
|
|
status = "disabled";
|
|
};
|
|
|
|
pcie2: pcie@3500000 {
|
|
compatible = "fsl,ls1028a-pcie";
|
|
reg = <0x00 0x03500000 0x0 0x00100000>, /* controller registers */
|
|
<0x88 0x00000000 0x0 0x00002000>; /* configuration space */
|
|
reg-names = "regs", "config";
|
|
interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "pme", "aer";
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
device_type = "pci";
|
|
dma-coherent;
|
|
num-viewport = <8>;
|
|
bus-range = <0x0 0xff>;
|
|
ranges = <0x81000000 0x0 0x00000000 0x88 0x00010000 0x0 0x00010000 /* downstream I/O */
|
|
0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
|
|
msi-parent = <&its>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0 0 0 7>;
|
|
interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0000 0 0 2 &gic 0 0 GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0000 0 0 3 &gic 0 0 GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0000 0 0 4 &gic 0 0 GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
|
|
iommu-map = <0 &smmu 0 1>; /* Fixed-up by bootloader */
|
|
status = "disabled";
|
|
};
|
|
|
|
smmu: iommu@5000000 {
|
|
compatible = "arm,mmu-500";
|
|
reg = <0 0x5000000 0 0x800000>;
|
|
#global-interrupts = <8>;
|
|
#iommu-cells = <1>;
|
|
stream-match-mask = <0x7c00>;
|
|
/* global secure fault */
|
|
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
|
|
/* combined secure interrupt */
|
|
<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
|
|
/* global non-secure fault */
|
|
<GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
|
|
/* combined non-secure interrupt */
|
|
<GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
|
|
/* performance counter interrupts 0-7 */
|
|
<GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
|
|
/* per context interrupt, 64 interrupts */
|
|
<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
crypto: crypto@8000000 {
|
|
compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
|
|
fsl,sec-era = <10>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x00 0x8000000 0x100000>;
|
|
reg = <0x00 0x8000000 0x0 0x100000>;
|
|
interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
|
|
dma-coherent;
|
|
|
|
sec_jr0: jr@10000 {
|
|
compatible = "fsl,sec-v5.0-job-ring",
|
|
"fsl,sec-v4.0-job-ring";
|
|
reg = <0x10000 0x10000>;
|
|
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
sec_jr1: jr@20000 {
|
|
compatible = "fsl,sec-v5.0-job-ring",
|
|
"fsl,sec-v4.0-job-ring";
|
|
reg = <0x20000 0x10000>;
|
|
interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
sec_jr2: jr@30000 {
|
|
compatible = "fsl,sec-v5.0-job-ring",
|
|
"fsl,sec-v4.0-job-ring";
|
|
reg = <0x30000 0x10000>;
|
|
interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
sec_jr3: jr@40000 {
|
|
compatible = "fsl,sec-v5.0-job-ring",
|
|
"fsl,sec-v4.0-job-ring";
|
|
reg = <0x40000 0x10000>;
|
|
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|
|
|
|
qdma: dma-controller@8380000 {
|
|
compatible = "fsl,ls1028a-qdma", "fsl,ls1021a-qdma";
|
|
reg = <0x0 0x8380000 0x0 0x1000>, /* Controller regs */
|
|
<0x0 0x8390000 0x0 0x10000>, /* Status regs */
|
|
<0x0 0x83a0000 0x0 0x40000>; /* Block regs */
|
|
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "qdma-error", "qdma-queue0",
|
|
"qdma-queue1", "qdma-queue2", "qdma-queue3";
|
|
dma-channels = <8>;
|
|
block-number = <1>;
|
|
block-offset = <0x10000>;
|
|
fsl,dma-queues = <2>;
|
|
status-sizes = <64>;
|
|
queue-sizes = <64 64>;
|
|
};
|
|
|
|
cluster1_core0_watchdog: watchdog@c000000 {
|
|
compatible = "arm,sp805", "arm,primecell";
|
|
reg = <0x0 0xc000000 0x0 0x1000>;
|
|
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(16)>,
|
|
<&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(16)>;
|
|
clock-names = "wdog_clk", "apb_pclk";
|
|
};
|
|
|
|
cluster1_core1_watchdog: watchdog@c010000 {
|
|
compatible = "arm,sp805", "arm,primecell";
|
|
reg = <0x0 0xc010000 0x0 0x1000>;
|
|
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(16)>,
|
|
<&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(16)>;
|
|
clock-names = "wdog_clk", "apb_pclk";
|
|
};
|
|
|
|
sai1: audio-controller@f100000 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "fsl,vf610-sai";
|
|
reg = <0x0 0xf100000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(2)>,
|
|
<&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(2)>,
|
|
<&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(2)>,
|
|
<&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(2)>;
|
|
clock-names = "bus", "mclk1", "mclk2", "mclk3";
|
|
dma-names = "tx", "rx";
|
|
dmas = <&edma0 1 4>,
|
|
<&edma0 1 3>;
|
|
fsl,sai-asynchronous;
|
|
status = "disabled";
|
|
};
|
|
|
|
sai2: audio-controller@f110000 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "fsl,vf610-sai";
|
|
reg = <0x0 0xf110000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(2)>,
|
|
<&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(2)>,
|
|
<&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(2)>,
|
|
<&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(2)>;
|
|
clock-names = "bus", "mclk1", "mclk2", "mclk3";
|
|
dma-names = "tx", "rx";
|
|
dmas = <&edma0 1 6>,
|
|
<&edma0 1 5>;
|
|
fsl,sai-asynchronous;
|
|
status = "disabled";
|
|
};
|
|
|
|
sai3: audio-controller@f120000 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "fsl,vf610-sai";
|
|
reg = <0x0 0xf120000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(2)>,
|
|
<&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(2)>,
|
|
<&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(2)>,
|
|
<&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(2)>;
|
|
clock-names = "bus", "mclk1", "mclk2", "mclk3";
|
|
dma-names = "tx", "rx";
|
|
dmas = <&edma0 1 8>,
|
|
<&edma0 1 7>;
|
|
fsl,sai-asynchronous;
|
|
status = "disabled";
|
|
};
|
|
|
|
sai4: audio-controller@f130000 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "fsl,vf610-sai";
|
|
reg = <0x0 0xf130000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(2)>,
|
|
<&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(2)>,
|
|
<&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(2)>,
|
|
<&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(2)>;
|
|
clock-names = "bus", "mclk1", "mclk2", "mclk3";
|
|
dma-names = "tx", "rx";
|
|
dmas = <&edma0 1 10>,
|
|
<&edma0 1 9>;
|
|
fsl,sai-asynchronous;
|
|
status = "disabled";
|
|
};
|
|
|
|
sai5: audio-controller@f140000 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "fsl,vf610-sai";
|
|
reg = <0x0 0xf140000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(2)>,
|
|
<&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(2)>,
|
|
<&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(2)>,
|
|
<&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(2)>;
|
|
clock-names = "bus", "mclk1", "mclk2", "mclk3";
|
|
dma-names = "tx", "rx";
|
|
dmas = <&edma0 1 12>,
|
|
<&edma0 1 11>;
|
|
fsl,sai-asynchronous;
|
|
status = "disabled";
|
|
};
|
|
|
|
sai6: audio-controller@f150000 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "fsl,vf610-sai";
|
|
reg = <0x0 0xf150000 0x0 0x10000>;
|
|
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(2)>,
|
|
<&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(2)>,
|
|
<&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(2)>,
|
|
<&clockgen QORIQ_CLK_PLATFORM_PLL
|
|
QORIQ_CLK_PLL_DIV(2)>;
|
|
clock-names = "bus", "mclk1", "mclk2", "mclk3";
|
|
dma-names = "tx", "rx";
|
|
dmas = <&edma0 1 14>,
|
|
<&edma0 1 13>;
|
|
fsl,sai-asynchronous;
|
|
status = "disabled";
|
|
};
|
|
|
|
tmu: tmu@1f80000 {
|
|
compatible = "fsl,qoriq-tmu";
|
|
reg = <0x0 0x1f80000 0x0 0x10000>;
|
|
interrupts = <0 23 0x4>;
|
|
fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>;
|
|
fsl,tmu-calibration = <0x00000000 0x00000024
|
|
0x00000001 0x0000002b
|
|
0x00000002 0x00000031
|
|
0x00000003 0x00000038
|
|
0x00000004 0x0000003f
|
|
0x00000005 0x00000045
|
|
0x00000006 0x0000004c
|
|
0x00000007 0x00000053
|
|
0x00000008 0x00000059
|
|
0x00000009 0x00000060
|
|
0x0000000a 0x00000066
|
|
0x0000000b 0x0000006d
|
|
|
|
0x00010000 0x0000001c
|
|
0x00010001 0x00000024
|
|
0x00010002 0x0000002c
|
|
0x00010003 0x00000035
|
|
0x00010004 0x0000003d
|
|
0x00010005 0x00000045
|
|
0x00010006 0x0000004d
|
|
0x00010007 0x00000055
|
|
0x00010008 0x0000005e
|
|
0x00010009 0x00000066
|
|
0x0001000a 0x0000006e
|
|
|
|
0x00020000 0x00000018
|
|
0x00020001 0x00000022
|
|
0x00020002 0x0000002d
|
|
0x00020003 0x00000038
|
|
0x00020004 0x00000043
|
|
0x00020005 0x0000004d
|
|
0x00020006 0x00000058
|
|
0x00020007 0x00000063
|
|
0x00020008 0x0000006e
|
|
|
|
0x00030000 0x00000010
|
|
0x00030001 0x0000001c
|
|
0x00030002 0x00000029
|
|
0x00030003 0x00000036
|
|
0x00030004 0x00000042
|
|
0x00030005 0x0000004f
|
|
0x00030006 0x0000005b
|
|
0x00030007 0x00000068>;
|
|
little-endian;
|
|
#thermal-sensor-cells = <1>;
|
|
};
|
|
|
|
pcie@1f0000000 { /* Integrated Endpoint Root Complex */
|
|
compatible = "pci-host-ecam-generic";
|
|
reg = <0x01 0xf0000000 0x0 0x100000>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
msi-parent = <&its>;
|
|
device_type = "pci";
|
|
bus-range = <0x0 0x0>;
|
|
dma-coherent;
|
|
msi-map = <0 &its 0x17 0xe>;
|
|
iommu-map = <0 &smmu 0x17 0xe>;
|
|
/* PF0-6 BAR0 - non-prefetchable memory */
|
|
ranges = <0x82000000 0x1 0xf8000000 0x1 0xf8000000 0x0 0x160000
|
|
/* PF0-6 BAR2 - prefetchable memory */
|
|
0xc2000000 0x1 0xf8160000 0x1 0xf8160000 0x0 0x070000
|
|
/* PF0: VF0-1 BAR0 - non-prefetchable memory */
|
|
0x82000000 0x1 0xf81d0000 0x1 0xf81d0000 0x0 0x020000
|
|
/* PF0: VF0-1 BAR2 - prefetchable memory */
|
|
0xc2000000 0x1 0xf81f0000 0x1 0xf81f0000 0x0 0x020000
|
|
/* PF1: VF0-1 BAR0 - non-prefetchable memory */
|
|
0x82000000 0x1 0xf8210000 0x1 0xf8210000 0x0 0x020000
|
|
/* PF1: VF0-1 BAR2 - prefetchable memory */
|
|
0xc2000000 0x1 0xf8230000 0x1 0xf8230000 0x0 0x020000
|
|
/* BAR4 (PF5) - non-prefetchable memory */
|
|
0x82000000 0x1 0xfc000000 0x1 0xfc000000 0x0 0x400000>;
|
|
|
|
enetc_port0: ethernet@0,0 {
|
|
compatible = "fsl,enetc";
|
|
reg = <0x000000 0 0 0 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
enetc_port1: ethernet@0,1 {
|
|
compatible = "fsl,enetc";
|
|
reg = <0x000100 0 0 0 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
enetc_port2: ethernet@0,2 {
|
|
compatible = "fsl,enetc";
|
|
reg = <0x000200 0 0 0 0>;
|
|
phy-mode = "internal";
|
|
status = "disabled";
|
|
|
|
fixed-link {
|
|
speed = <2500>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
|
|
enetc_mdio_pf3: mdio@0,3 {
|
|
compatible = "fsl,enetc-mdio";
|
|
reg = <0x000300 0 0 0 0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
ethernet@0,4 {
|
|
compatible = "fsl,enetc-ptp";
|
|
reg = <0x000400 0 0 0 0>;
|
|
clocks = <&clockgen QORIQ_CLK_HWACCEL 3>;
|
|
little-endian;
|
|
fsl,extts-fifo;
|
|
};
|
|
|
|
mscc_felix: ethernet-switch@0,5 {
|
|
reg = <0x000500 0 0 0 0>;
|
|
/* IEP INT_B */
|
|
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
|
|
status = "disabled";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
/* External ports */
|
|
mscc_felix_port0: port@0 {
|
|
reg = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mscc_felix_port1: port@1 {
|
|
reg = <1>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mscc_felix_port2: port@2 {
|
|
reg = <2>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mscc_felix_port3: port@3 {
|
|
reg = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
/* Internal ports */
|
|
mscc_felix_port4: port@4 {
|
|
reg = <4>;
|
|
phy-mode = "internal";
|
|
status = "disabled";
|
|
|
|
fixed-link {
|
|
speed = <2500>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
|
|
mscc_felix_port5: port@5 {
|
|
reg = <5>;
|
|
phy-mode = "internal";
|
|
status = "disabled";
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
enetc_port3: ethernet@0,6 {
|
|
compatible = "fsl,enetc";
|
|
reg = <0x000600 0 0 0 0>;
|
|
phy-mode = "internal";
|
|
status = "disabled";
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
|
|
rcec@1f,0 {
|
|
reg = <0x00f800 0 0 0 0>;
|
|
/* IEP INT_A */
|
|
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|
|
|
|
/* Integrated Endpoint Register Block */
|
|
ierb@1f0800000 {
|
|
compatible = "fsl,ls1028a-enetc-ierb";
|
|
reg = <0x01 0xf0800000 0x0 0x10000>;
|
|
};
|
|
|
|
rcpm: power-controller@1e34040 {
|
|
compatible = "fsl,ls1028a-rcpm", "fsl,qoriq-rcpm-2.1+";
|
|
reg = <0x0 0x1e34040 0x0 0x1c>;
|
|
#fsl,rcpm-wakeup-cells = <7>;
|
|
little-endian;
|
|
};
|
|
|
|
ftm_alarm0: timer@2800000 {
|
|
compatible = "fsl,ls1028a-ftm-alarm";
|
|
reg = <0x0 0x2800000 0x0 0x10000>;
|
|
fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>;
|
|
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|
|
|
|
malidp0: display@f080000 {
|
|
compatible = "arm,mali-dp500";
|
|
reg = <0x0 0xf080000 0x0 0x10000>;
|
|
interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
|
|
<0 223 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "DE", "SE";
|
|
clocks = <&dpclk>,
|
|
<&clockgen QORIQ_CLK_HWACCEL 2>,
|
|
<&clockgen QORIQ_CLK_HWACCEL 2>,
|
|
<&clockgen QORIQ_CLK_HWACCEL 2>;
|
|
clock-names = "pxlclk", "mclk", "aclk", "pclk";
|
|
arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
|
|
arm,malidp-arqos-value = <0xd000d000>;
|
|
|
|
port {
|
|
dp0_out: endpoint {
|
|
|
|
};
|
|
};
|
|
};
|
|
};
|