mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-23 11:33:32 +00:00
2569b51e32
This reverts commitdfbe492ede
. Analog bus control register should be programmed in SPL only. This commit3414712ba8
("arm64: zynqmp: Writing correct value to ANALOG_BUS") is programming the same. So revert this commit. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Link: https://lore.kernel.org/r/215bc936e36f88d2e7c4422ec68cad6d40cb8f68.1645624892.git.michal.simek@xilinx.com
933 lines
19 KiB
C
933 lines
19 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2014 - 2015 Xilinx, Inc.
|
|
* Michal Simek <michal.simek@xilinx.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <cpu_func.h>
|
|
#include <debug_uart.h>
|
|
#include <dfu.h>
|
|
#include <env.h>
|
|
#include <env_internal.h>
|
|
#include <init.h>
|
|
#include <image.h>
|
|
#include <lmb.h>
|
|
#include <log.h>
|
|
#include <net.h>
|
|
#include <sata.h>
|
|
#include <ahci.h>
|
|
#include <scsi.h>
|
|
#include <malloc.h>
|
|
#include <memalign.h>
|
|
#include <wdt.h>
|
|
#include <asm/arch/clk.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/arch/psu_init_gpl.h>
|
|
#include <asm/cache.h>
|
|
#include <asm/global_data.h>
|
|
#include <asm/io.h>
|
|
#include <asm/ptrace.h>
|
|
#include <dm/device.h>
|
|
#include <dm/uclass.h>
|
|
#include <usb.h>
|
|
#include <dwc3-uboot.h>
|
|
#include <zynqmppl.h>
|
|
#include <zynqmp_firmware.h>
|
|
#include <g_dnl.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/sizes.h>
|
|
#include "../common/board.h"
|
|
|
|
#include "pm_cfg_obj.h"
|
|
|
|
#define ZYNQMP_VERSION_SIZE 7
|
|
#define EFUSE_VCU_DIS_MASK 0x100
|
|
#define EFUSE_VCU_DIS_SHIFT 8
|
|
#define EFUSE_GPU_DIS_MASK 0x20
|
|
#define EFUSE_GPU_DIS_SHIFT 5
|
|
#define IDCODE2_PL_INIT_MASK 0x200
|
|
#define IDCODE2_PL_INIT_SHIFT 9
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#if CONFIG_IS_ENABLED(FPGA) && defined(CONFIG_FPGA_ZYNQMPPL)
|
|
static xilinx_desc zynqmppl = XILINX_ZYNQMP_DESC;
|
|
|
|
enum {
|
|
ZYNQMP_VARIANT_EG = BIT(0U),
|
|
ZYNQMP_VARIANT_EV = BIT(1U),
|
|
ZYNQMP_VARIANT_CG = BIT(2U),
|
|
ZYNQMP_VARIANT_DR = BIT(3U),
|
|
};
|
|
|
|
static const struct {
|
|
u32 id;
|
|
u8 device;
|
|
u8 variants;
|
|
} zynqmp_devices[] = {
|
|
{
|
|
.id = 0x04711093,
|
|
.device = 2,
|
|
.variants = ZYNQMP_VARIANT_EG | ZYNQMP_VARIANT_CG,
|
|
},
|
|
{
|
|
.id = 0x04710093,
|
|
.device = 3,
|
|
.variants = ZYNQMP_VARIANT_EG | ZYNQMP_VARIANT_CG,
|
|
},
|
|
{
|
|
.id = 0x04721093,
|
|
.device = 4,
|
|
.variants = ZYNQMP_VARIANT_EG | ZYNQMP_VARIANT_CG |
|
|
ZYNQMP_VARIANT_EV,
|
|
},
|
|
{
|
|
.id = 0x04720093,
|
|
.device = 5,
|
|
.variants = ZYNQMP_VARIANT_EG | ZYNQMP_VARIANT_CG |
|
|
ZYNQMP_VARIANT_EV,
|
|
},
|
|
{
|
|
.id = 0x04739093,
|
|
.device = 6,
|
|
.variants = ZYNQMP_VARIANT_EG | ZYNQMP_VARIANT_CG,
|
|
},
|
|
{
|
|
.id = 0x04730093,
|
|
.device = 7,
|
|
.variants = ZYNQMP_VARIANT_EG | ZYNQMP_VARIANT_CG |
|
|
ZYNQMP_VARIANT_EV,
|
|
},
|
|
{
|
|
.id = 0x04738093,
|
|
.device = 9,
|
|
.variants = ZYNQMP_VARIANT_EG | ZYNQMP_VARIANT_CG,
|
|
},
|
|
{
|
|
.id = 0x04740093,
|
|
.device = 11,
|
|
.variants = ZYNQMP_VARIANT_EG,
|
|
},
|
|
{
|
|
.id = 0x04750093,
|
|
.device = 15,
|
|
.variants = ZYNQMP_VARIANT_EG,
|
|
},
|
|
{
|
|
.id = 0x04759093,
|
|
.device = 17,
|
|
.variants = ZYNQMP_VARIANT_EG,
|
|
},
|
|
{
|
|
.id = 0x04758093,
|
|
.device = 19,
|
|
.variants = ZYNQMP_VARIANT_EG,
|
|
},
|
|
{
|
|
.id = 0x047E1093,
|
|
.device = 21,
|
|
.variants = ZYNQMP_VARIANT_DR,
|
|
},
|
|
{
|
|
.id = 0x047E3093,
|
|
.device = 23,
|
|
.variants = ZYNQMP_VARIANT_DR,
|
|
},
|
|
{
|
|
.id = 0x047E5093,
|
|
.device = 25,
|
|
.variants = ZYNQMP_VARIANT_DR,
|
|
},
|
|
{
|
|
.id = 0x047E4093,
|
|
.device = 27,
|
|
.variants = ZYNQMP_VARIANT_DR,
|
|
},
|
|
{
|
|
.id = 0x047E0093,
|
|
.device = 28,
|
|
.variants = ZYNQMP_VARIANT_DR,
|
|
},
|
|
{
|
|
.id = 0x047E2093,
|
|
.device = 29,
|
|
.variants = ZYNQMP_VARIANT_DR,
|
|
},
|
|
{
|
|
.id = 0x047E6093,
|
|
.device = 39,
|
|
.variants = ZYNQMP_VARIANT_DR,
|
|
},
|
|
{
|
|
.id = 0x047FD093,
|
|
.device = 43,
|
|
.variants = ZYNQMP_VARIANT_DR,
|
|
},
|
|
{
|
|
.id = 0x047F8093,
|
|
.device = 46,
|
|
.variants = ZYNQMP_VARIANT_DR,
|
|
},
|
|
{
|
|
.id = 0x047FF093,
|
|
.device = 47,
|
|
.variants = ZYNQMP_VARIANT_DR,
|
|
},
|
|
{
|
|
.id = 0x047FB093,
|
|
.device = 48,
|
|
.variants = ZYNQMP_VARIANT_DR,
|
|
},
|
|
{
|
|
.id = 0x047FE093,
|
|
.device = 49,
|
|
.variants = ZYNQMP_VARIANT_DR,
|
|
},
|
|
{
|
|
.id = 0x046d0093,
|
|
.device = 67,
|
|
.variants = ZYNQMP_VARIANT_DR,
|
|
},
|
|
};
|
|
|
|
static const struct {
|
|
u32 id;
|
|
char *name;
|
|
} zynqmp_svd_devices[] = {
|
|
{
|
|
.id = 0x04714093,
|
|
.name = "xck24"
|
|
},
|
|
{
|
|
.id = 0x04724093,
|
|
.name = "xck26",
|
|
},
|
|
};
|
|
|
|
static char *zynqmp_detect_svd_name(u32 idcode)
|
|
{
|
|
u32 i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(zynqmp_svd_devices); i++) {
|
|
if (zynqmp_svd_devices[i].id == (idcode & 0x0FFFFFFF))
|
|
return zynqmp_svd_devices[i].name;
|
|
}
|
|
|
|
return "unknown";
|
|
}
|
|
|
|
static char *zynqmp_get_silicon_idcode_name(void)
|
|
{
|
|
u32 i;
|
|
u32 idcode, idcode2;
|
|
char name[ZYNQMP_VERSION_SIZE];
|
|
u32 ret_payload[PAYLOAD_ARG_CNT];
|
|
int ret;
|
|
|
|
ret = xilinx_pm_request(PM_GET_CHIPID, 0, 0, 0, 0, ret_payload);
|
|
if (ret) {
|
|
debug("%s: Getting chipid failed\n", __func__);
|
|
return "unknown";
|
|
}
|
|
|
|
/*
|
|
* Firmware returns:
|
|
* payload[0][31:0] = status of the operation
|
|
* payload[1]] = IDCODE
|
|
* payload[2][19:0] = Version
|
|
* payload[2][28:20] = EXTENDED_IDCODE
|
|
* payload[2][29] = PL_INIT
|
|
*/
|
|
|
|
idcode = ret_payload[1];
|
|
idcode2 = ret_payload[2] >> ZYNQMP_CSU_VERSION_EMPTY_SHIFT;
|
|
debug("%s, IDCODE: 0x%0x, IDCODE2: 0x%0x\r\n", __func__, idcode,
|
|
idcode2);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(zynqmp_devices); i++) {
|
|
if (zynqmp_devices[i].id == (idcode & 0x0FFFFFFF))
|
|
break;
|
|
}
|
|
|
|
if (i >= ARRAY_SIZE(zynqmp_devices))
|
|
return zynqmp_detect_svd_name(idcode);
|
|
|
|
/* Add device prefix to the name */
|
|
ret = snprintf(name, ZYNQMP_VERSION_SIZE, "zu%d",
|
|
zynqmp_devices[i].device);
|
|
if (ret < 0)
|
|
return "unknown";
|
|
|
|
if (zynqmp_devices[i].variants & ZYNQMP_VARIANT_EV) {
|
|
/* Devices with EV variant might be EG/CG/EV family */
|
|
if (idcode2 & IDCODE2_PL_INIT_MASK) {
|
|
u32 family = ((idcode2 & EFUSE_VCU_DIS_MASK) >>
|
|
EFUSE_VCU_DIS_SHIFT) << 1 |
|
|
((idcode2 & EFUSE_GPU_DIS_MASK) >>
|
|
EFUSE_GPU_DIS_SHIFT);
|
|
|
|
/*
|
|
* Get family name based on extended idcode values as
|
|
* determined on UG1087, EXTENDED_IDCODE register
|
|
* description
|
|
*/
|
|
switch (family) {
|
|
case 0x00:
|
|
strncat(name, "ev", 2);
|
|
break;
|
|
case 0x10:
|
|
strncat(name, "eg", 2);
|
|
break;
|
|
case 0x11:
|
|
strncat(name, "cg", 2);
|
|
break;
|
|
default:
|
|
/* Do not append family name*/
|
|
break;
|
|
}
|
|
} else {
|
|
/*
|
|
* When PL powered down the VCU Disable efuse cannot be
|
|
* read. So, ignore the bit and just findout if it is CG
|
|
* or EG/EV variant.
|
|
*/
|
|
strncat(name, (idcode2 & EFUSE_GPU_DIS_MASK) ? "cg" :
|
|
"e", 2);
|
|
}
|
|
} else if (zynqmp_devices[i].variants & ZYNQMP_VARIANT_CG) {
|
|
/* Devices with CG variant might be EG or CG family */
|
|
strncat(name, (idcode2 & EFUSE_GPU_DIS_MASK) ? "cg" : "eg", 2);
|
|
} else if (zynqmp_devices[i].variants & ZYNQMP_VARIANT_EG) {
|
|
strncat(name, "eg", 2);
|
|
} else if (zynqmp_devices[i].variants & ZYNQMP_VARIANT_DR) {
|
|
strncat(name, "dr", 2);
|
|
} else {
|
|
debug("Variant not identified\n");
|
|
}
|
|
|
|
return strdup(name);
|
|
}
|
|
#endif
|
|
|
|
int __maybe_unused psu_uboot_init(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = psu_init();
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* PS_SYSMON_ANALOG_BUS register determines mapping between SysMon
|
|
* supply sense channel to SysMon supply registers inside the IP.
|
|
* This register must be programmed to complete SysMon IP
|
|
* configuration. The default register configuration after
|
|
* power-up is incorrect. Hence, fix this by writing the
|
|
* correct value - 0x3210.
|
|
*/
|
|
writel(ZYNQMP_PS_SYSMON_ANALOG_BUS_VAL,
|
|
ZYNQMP_AMS_PS_SYSMON_ANALOG_BUS);
|
|
|
|
/* Delay is required for clocks to be propagated */
|
|
udelay(1000000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if !defined(CONFIG_SPL_BUILD)
|
|
# if defined(CONFIG_DEBUG_UART_BOARD_INIT)
|
|
void board_debug_uart_init(void)
|
|
{
|
|
# if defined(CONFIG_ZYNQMP_PSU_INIT_ENABLED)
|
|
psu_uboot_init();
|
|
# endif
|
|
}
|
|
# endif
|
|
|
|
# if defined(CONFIG_BOARD_EARLY_INIT_F)
|
|
int board_early_init_f(void)
|
|
{
|
|
int ret = 0;
|
|
# if defined(CONFIG_ZYNQMP_PSU_INIT_ENABLED) && !defined(CONFIG_DEBUG_UART_BOARD_INIT)
|
|
ret = psu_uboot_init();
|
|
# endif
|
|
return ret;
|
|
}
|
|
# endif
|
|
#endif
|
|
|
|
static int multi_boot(void)
|
|
{
|
|
u32 multiboot = 0;
|
|
int ret;
|
|
|
|
ret = zynqmp_mmio_read((ulong)&csu_base->multi_boot, &multiboot);
|
|
if (ret)
|
|
return -EINVAL;
|
|
|
|
return multiboot;
|
|
}
|
|
|
|
#if defined(CONFIG_SPL_BUILD)
|
|
static void restore_jtag(void)
|
|
{
|
|
if (current_el() != 3)
|
|
return;
|
|
|
|
writel(CSU_JTAG_SEC_GATE_DISABLE, &csu_base->jtag_sec);
|
|
writel(CSU_JTAG_DAP_ENABLE_DEBUG, &csu_base->jtag_dap_cfg);
|
|
writel(CSU_JTAG_CHAIN_WR_SETUP, &csu_base->jtag_chain_status_wr);
|
|
writel(CRLAPB_DBG_LPD_CTRL_SETUP_CLK, &crlapb_base->dbg_lpd_ctrl);
|
|
writel(CRLAPB_RST_LPD_DBG_RESET, &crlapb_base->rst_lpd_dbg);
|
|
writel(CSU_PCAP_PROG_RELEASE_PL, &csu_base->pcap_prog);
|
|
}
|
|
#endif
|
|
|
|
static void print_secure_boot(void)
|
|
{
|
|
u32 status = 0;
|
|
|
|
if (zynqmp_mmio_read((ulong)&csu_base->status, &status))
|
|
return;
|
|
|
|
printf("Secure Boot:\t%sauthenticated, %sencrypted\n",
|
|
status & ZYNQMP_CSU_STATUS_AUTHENTICATED ? "" : "not ",
|
|
status & ZYNQMP_CSU_STATUS_ENCRYPTED ? "" : "not ");
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
#if defined(CONFIG_ZYNQMP_FIRMWARE)
|
|
struct udevice *dev;
|
|
|
|
uclass_get_device_by_name(UCLASS_FIRMWARE, "zynqmp-power", &dev);
|
|
if (!dev)
|
|
panic("PMU Firmware device not found - Enable it");
|
|
#endif
|
|
|
|
#if defined(CONFIG_SPL_BUILD)
|
|
/* Check *at build time* if the filename is an non-empty string */
|
|
if (sizeof(CONFIG_ZYNQMP_SPL_PM_CFG_OBJ_FILE) > 1)
|
|
zynqmp_pmufw_load_config_object(zynqmp_pm_cfg_obj,
|
|
zynqmp_pm_cfg_obj_size);
|
|
printf("Silicon version:\t%d\n", zynqmp_get_silicon_version());
|
|
|
|
/* the CSU disables the JTAG interface when secure boot is enabled */
|
|
if (CONFIG_IS_ENABLED(ZYNQMP_RESTORE_JTAG))
|
|
restore_jtag();
|
|
#else
|
|
if (CONFIG_IS_ENABLED(DM_I2C) && CONFIG_IS_ENABLED(I2C_EEPROM))
|
|
xilinx_read_eeprom();
|
|
#endif
|
|
|
|
printf("EL Level:\tEL%d\n", current_el());
|
|
|
|
#if CONFIG_IS_ENABLED(FPGA) && defined(CONFIG_FPGA_ZYNQMPPL)
|
|
zynqmppl.name = zynqmp_get_silicon_idcode_name();
|
|
printf("Chip ID:\t%s\n", zynqmppl.name);
|
|
fpga_init();
|
|
fpga_add(fpga_xilinx, &zynqmppl);
|
|
#endif
|
|
|
|
/* display secure boot information */
|
|
print_secure_boot();
|
|
if (current_el() == 3)
|
|
printf("Multiboot:\t%d\n", multi_boot());
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_early_init_r(void)
|
|
{
|
|
u32 val;
|
|
|
|
if (current_el() != 3)
|
|
return 0;
|
|
|
|
val = readl(&crlapb_base->timestamp_ref_ctrl);
|
|
val &= ZYNQMP_CRL_APB_TIMESTAMP_REF_CTRL_CLKACT;
|
|
|
|
if (!val) {
|
|
val = readl(&crlapb_base->timestamp_ref_ctrl);
|
|
val |= ZYNQMP_CRL_APB_TIMESTAMP_REF_CTRL_CLKACT;
|
|
writel(val, &crlapb_base->timestamp_ref_ctrl);
|
|
|
|
/* Program freq register in System counter */
|
|
writel(zynqmp_get_system_timer_freq(),
|
|
&iou_scntr_secure->base_frequency_id_register);
|
|
/* And enable system counter */
|
|
writel(ZYNQMP_IOU_SCNTR_COUNTER_CONTROL_REGISTER_EN,
|
|
&iou_scntr_secure->counter_control_register);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
unsigned long do_go_exec(ulong (*entry)(int, char * const []), int argc,
|
|
char *const argv[])
|
|
{
|
|
int ret = 0;
|
|
|
|
if (current_el() > 1) {
|
|
smp_kick_all_cpus();
|
|
dcache_disable();
|
|
armv8_switch_to_el1(0x0, 0, 0, 0, (unsigned long)entry,
|
|
ES_TO_AARCH64);
|
|
} else {
|
|
printf("FAIL: current EL is not above EL1\n");
|
|
ret = EINVAL;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
#if !defined(CONFIG_SYS_SDRAM_BASE) && !defined(CONFIG_SYS_SDRAM_SIZE)
|
|
int dram_init_banksize(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = fdtdec_setup_memory_banksize();
|
|
if (ret)
|
|
return ret;
|
|
|
|
mem_map_fill();
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dram_init(void)
|
|
{
|
|
if (fdtdec_setup_mem_size_base() != 0)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
ulong board_get_usable_ram_top(ulong total_size)
|
|
{
|
|
phys_size_t size;
|
|
phys_addr_t reg;
|
|
struct lmb lmb;
|
|
|
|
if (!IS_ALIGNED((ulong)gd->fdt_blob, 0x8))
|
|
panic("Not 64bit aligned DT location: %p\n", gd->fdt_blob);
|
|
|
|
/* found enough not-reserved memory to relocated U-Boot */
|
|
lmb_init(&lmb);
|
|
lmb_add(&lmb, gd->ram_base, gd->ram_size);
|
|
boot_fdt_add_mem_rsv_regions(&lmb, (void *)gd->fdt_blob);
|
|
size = ALIGN(CONFIG_SYS_MALLOC_LEN + total_size, MMU_SECTION_SIZE);
|
|
reg = lmb_alloc(&lmb, size, MMU_SECTION_SIZE);
|
|
|
|
if (!reg)
|
|
reg = gd->ram_top - size;
|
|
|
|
return reg + size;
|
|
}
|
|
#else
|
|
int dram_init_banksize(void)
|
|
{
|
|
gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
|
|
gd->bd->bi_dram[0].size = get_effective_memsize();
|
|
|
|
mem_map_fill();
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dram_init(void)
|
|
{
|
|
gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
|
|
CONFIG_SYS_SDRAM_SIZE);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#if !CONFIG_IS_ENABLED(SYSRESET)
|
|
void reset_cpu(void)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
static u8 __maybe_unused zynqmp_get_bootmode(void)
|
|
{
|
|
u8 bootmode;
|
|
u32 reg = 0;
|
|
int ret;
|
|
|
|
ret = zynqmp_mmio_read((ulong)&crlapb_base->boot_mode, ®);
|
|
if (ret)
|
|
return -EINVAL;
|
|
|
|
debug("HW boot mode: %x\n", reg & BOOT_MODES_MASK);
|
|
debug("ALT boot mode: %x\n", reg >> BOOT_MODE_ALT_SHIFT);
|
|
|
|
if (reg >> BOOT_MODE_ALT_SHIFT)
|
|
reg >>= BOOT_MODE_ALT_SHIFT;
|
|
|
|
bootmode = reg & BOOT_MODES_MASK;
|
|
|
|
return bootmode;
|
|
}
|
|
|
|
#if defined(CONFIG_BOARD_LATE_INIT)
|
|
static const struct {
|
|
u32 bit;
|
|
const char *name;
|
|
} reset_reasons[] = {
|
|
{ RESET_REASON_DEBUG_SYS, "DEBUG" },
|
|
{ RESET_REASON_SOFT, "SOFT" },
|
|
{ RESET_REASON_SRST, "SRST" },
|
|
{ RESET_REASON_PSONLY, "PS-ONLY" },
|
|
{ RESET_REASON_PMU, "PMU" },
|
|
{ RESET_REASON_INTERNAL, "INTERNAL" },
|
|
{ RESET_REASON_EXTERNAL, "EXTERNAL" },
|
|
{}
|
|
};
|
|
|
|
static int reset_reason(void)
|
|
{
|
|
u32 reg;
|
|
int i, ret;
|
|
const char *reason = NULL;
|
|
|
|
ret = zynqmp_mmio_read((ulong)&crlapb_base->reset_reason, ®);
|
|
if (ret)
|
|
return -EINVAL;
|
|
|
|
puts("Reset reason:\t");
|
|
|
|
for (i = 0; i < ARRAY_SIZE(reset_reasons); i++) {
|
|
if (reg & reset_reasons[i].bit) {
|
|
reason = reset_reasons[i].name;
|
|
printf("%s ", reset_reasons[i].name);
|
|
break;
|
|
}
|
|
}
|
|
|
|
puts("\n");
|
|
|
|
env_set("reset_reason", reason);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int set_fdtfile(void)
|
|
{
|
|
char *compatible, *fdtfile;
|
|
const char *suffix = ".dtb";
|
|
const char *vendor = "xilinx/";
|
|
int fdt_compat_len;
|
|
|
|
if (env_get("fdtfile"))
|
|
return 0;
|
|
|
|
compatible = (char *)fdt_getprop(gd->fdt_blob, 0, "compatible",
|
|
&fdt_compat_len);
|
|
if (compatible && fdt_compat_len) {
|
|
char *name;
|
|
|
|
debug("Compatible: %s\n", compatible);
|
|
|
|
name = strchr(compatible, ',');
|
|
if (!name)
|
|
return -EINVAL;
|
|
|
|
name++;
|
|
|
|
fdtfile = calloc(1, strlen(vendor) + strlen(name) +
|
|
strlen(suffix) + 1);
|
|
if (!fdtfile)
|
|
return -ENOMEM;
|
|
|
|
sprintf(fdtfile, "%s%s%s", vendor, name, suffix);
|
|
|
|
env_set("fdtfile", fdtfile);
|
|
free(fdtfile);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_late_init(void)
|
|
{
|
|
u8 bootmode;
|
|
struct udevice *dev;
|
|
int bootseq = -1;
|
|
int bootseq_len = 0;
|
|
int env_targets_len = 0;
|
|
const char *mode;
|
|
char *new_targets;
|
|
char *env_targets;
|
|
int ret, multiboot;
|
|
|
|
#if defined(CONFIG_USB_ETHER) && !defined(CONFIG_USB_GADGET_DOWNLOAD)
|
|
usb_ether_init();
|
|
#endif
|
|
|
|
if (!(gd->flags & GD_FLG_ENV_DEFAULT)) {
|
|
debug("Saved variables - Skipping\n");
|
|
return 0;
|
|
}
|
|
|
|
if (!CONFIG_IS_ENABLED(ENV_VARS_UBOOT_RUNTIME_CONFIG))
|
|
return 0;
|
|
|
|
ret = set_fdtfile();
|
|
if (ret)
|
|
return ret;
|
|
|
|
multiboot = multi_boot();
|
|
if (multiboot >= 0)
|
|
env_set_hex("multiboot", multiboot);
|
|
|
|
bootmode = zynqmp_get_bootmode();
|
|
|
|
puts("Bootmode: ");
|
|
switch (bootmode) {
|
|
case USB_MODE:
|
|
puts("USB_MODE\n");
|
|
mode = "usb_dfu0 usb_dfu1";
|
|
env_set("modeboot", "usb_dfu_spl");
|
|
break;
|
|
case JTAG_MODE:
|
|
puts("JTAG_MODE\n");
|
|
mode = "jtag pxe dhcp";
|
|
env_set("modeboot", "jtagboot");
|
|
break;
|
|
case QSPI_MODE_24BIT:
|
|
case QSPI_MODE_32BIT:
|
|
mode = "qspi0";
|
|
puts("QSPI_MODE\n");
|
|
env_set("modeboot", "qspiboot");
|
|
break;
|
|
case EMMC_MODE:
|
|
puts("EMMC_MODE\n");
|
|
if (uclass_get_device_by_name(UCLASS_MMC,
|
|
"mmc@ff160000", &dev) &&
|
|
uclass_get_device_by_name(UCLASS_MMC,
|
|
"sdhci@ff160000", &dev)) {
|
|
puts("Boot from EMMC but without SD0 enabled!\n");
|
|
return -1;
|
|
}
|
|
debug("mmc0 device found at %p, seq %d\n", dev, dev_seq(dev));
|
|
|
|
mode = "mmc";
|
|
bootseq = dev_seq(dev);
|
|
env_set("modeboot", "emmcboot");
|
|
break;
|
|
case SD_MODE:
|
|
puts("SD_MODE\n");
|
|
if (uclass_get_device_by_name(UCLASS_MMC,
|
|
"mmc@ff160000", &dev) &&
|
|
uclass_get_device_by_name(UCLASS_MMC,
|
|
"sdhci@ff160000", &dev)) {
|
|
puts("Boot from SD0 but without SD0 enabled!\n");
|
|
return -1;
|
|
}
|
|
debug("mmc0 device found at %p, seq %d\n", dev, dev_seq(dev));
|
|
|
|
mode = "mmc";
|
|
bootseq = dev_seq(dev);
|
|
env_set("modeboot", "sdboot");
|
|
break;
|
|
case SD1_LSHFT_MODE:
|
|
puts("LVL_SHFT_");
|
|
fallthrough;
|
|
case SD_MODE1:
|
|
puts("SD_MODE1\n");
|
|
if (uclass_get_device_by_name(UCLASS_MMC,
|
|
"mmc@ff170000", &dev) &&
|
|
uclass_get_device_by_name(UCLASS_MMC,
|
|
"sdhci@ff170000", &dev)) {
|
|
puts("Boot from SD1 but without SD1 enabled!\n");
|
|
return -1;
|
|
}
|
|
debug("mmc1 device found at %p, seq %d\n", dev, dev_seq(dev));
|
|
|
|
mode = "mmc";
|
|
bootseq = dev_seq(dev);
|
|
env_set("modeboot", "sdboot");
|
|
break;
|
|
case NAND_MODE:
|
|
puts("NAND_MODE\n");
|
|
mode = "nand0";
|
|
env_set("modeboot", "nandboot");
|
|
break;
|
|
default:
|
|
mode = "";
|
|
printf("Invalid Boot Mode:0x%x\n", bootmode);
|
|
break;
|
|
}
|
|
|
|
if (bootseq >= 0) {
|
|
bootseq_len = snprintf(NULL, 0, "%i", bootseq);
|
|
debug("Bootseq len: %x\n", bootseq_len);
|
|
env_set_hex("bootseq", bootseq);
|
|
}
|
|
|
|
/*
|
|
* One terminating char + one byte for space between mode
|
|
* and default boot_targets
|
|
*/
|
|
env_targets = env_get("boot_targets");
|
|
if (env_targets)
|
|
env_targets_len = strlen(env_targets);
|
|
|
|
new_targets = calloc(1, strlen(mode) + env_targets_len + 2 +
|
|
bootseq_len);
|
|
if (!new_targets)
|
|
return -ENOMEM;
|
|
|
|
if (bootseq >= 0)
|
|
sprintf(new_targets, "%s%x %s", mode, bootseq,
|
|
env_targets ? env_targets : "");
|
|
else
|
|
sprintf(new_targets, "%s %s", mode,
|
|
env_targets ? env_targets : "");
|
|
|
|
env_set("boot_targets", new_targets);
|
|
free(new_targets);
|
|
|
|
reset_reason();
|
|
|
|
return board_late_init_xilinx();
|
|
}
|
|
#endif
|
|
|
|
int checkboard(void)
|
|
{
|
|
puts("Board: Xilinx ZynqMP\n");
|
|
return 0;
|
|
}
|
|
|
|
int mmc_get_env_dev(void)
|
|
{
|
|
struct udevice *dev;
|
|
int bootseq = 0;
|
|
|
|
switch (zynqmp_get_bootmode()) {
|
|
case EMMC_MODE:
|
|
case SD_MODE:
|
|
if (uclass_get_device_by_name(UCLASS_MMC,
|
|
"mmc@ff160000", &dev) &&
|
|
uclass_get_device_by_name(UCLASS_MMC,
|
|
"sdhci@ff160000", &dev)) {
|
|
return -1;
|
|
}
|
|
bootseq = dev_seq(dev);
|
|
break;
|
|
case SD1_LSHFT_MODE:
|
|
case SD_MODE1:
|
|
if (uclass_get_device_by_name(UCLASS_MMC,
|
|
"mmc@ff170000", &dev) &&
|
|
uclass_get_device_by_name(UCLASS_MMC,
|
|
"sdhci@ff170000", &dev)) {
|
|
return -1;
|
|
}
|
|
bootseq = dev_seq(dev);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
debug("bootseq %d\n", bootseq);
|
|
|
|
return bootseq;
|
|
}
|
|
|
|
enum env_location env_get_location(enum env_operation op, int prio)
|
|
{
|
|
u32 bootmode = zynqmp_get_bootmode();
|
|
|
|
if (prio)
|
|
return ENVL_UNKNOWN;
|
|
|
|
switch (bootmode) {
|
|
case EMMC_MODE:
|
|
case SD_MODE:
|
|
case SD1_LSHFT_MODE:
|
|
case SD_MODE1:
|
|
if (IS_ENABLED(CONFIG_ENV_IS_IN_FAT))
|
|
return ENVL_FAT;
|
|
if (IS_ENABLED(CONFIG_ENV_IS_IN_EXT4))
|
|
return ENVL_EXT4;
|
|
return ENVL_NOWHERE;
|
|
case NAND_MODE:
|
|
if (IS_ENABLED(CONFIG_ENV_IS_IN_NAND))
|
|
return ENVL_NAND;
|
|
if (IS_ENABLED(CONFIG_ENV_IS_IN_UBI))
|
|
return ENVL_UBI;
|
|
return ENVL_NOWHERE;
|
|
case QSPI_MODE_24BIT:
|
|
case QSPI_MODE_32BIT:
|
|
if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH))
|
|
return ENVL_SPI_FLASH;
|
|
return ENVL_NOWHERE;
|
|
case JTAG_MODE:
|
|
default:
|
|
return ENVL_NOWHERE;
|
|
}
|
|
}
|
|
|
|
#if defined(CONFIG_SET_DFU_ALT_INFO)
|
|
|
|
#define DFU_ALT_BUF_LEN SZ_1K
|
|
|
|
void set_dfu_alt_info(char *interface, char *devstr)
|
|
{
|
|
u8 multiboot;
|
|
int bootseq = 0;
|
|
|
|
ALLOC_CACHE_ALIGN_BUFFER(char, buf, DFU_ALT_BUF_LEN);
|
|
|
|
if (env_get("dfu_alt_info"))
|
|
return;
|
|
|
|
memset(buf, 0, sizeof(buf));
|
|
|
|
multiboot = multi_boot();
|
|
if (multiboot < 0)
|
|
multiboot = 0;
|
|
|
|
multiboot = env_get_hex("multiboot", multiboot);
|
|
debug("Multiboot: %d\n", multiboot);
|
|
|
|
switch (zynqmp_get_bootmode()) {
|
|
case EMMC_MODE:
|
|
case SD_MODE:
|
|
case SD1_LSHFT_MODE:
|
|
case SD_MODE1:
|
|
bootseq = mmc_get_env_dev();
|
|
if (!multiboot)
|
|
snprintf(buf, DFU_ALT_BUF_LEN,
|
|
"mmc %d:1=boot.bin fat %d 1;"
|
|
"%s fat %d 1",
|
|
bootseq, bootseq,
|
|
CONFIG_SPL_FS_LOAD_PAYLOAD_NAME, bootseq);
|
|
else
|
|
snprintf(buf, DFU_ALT_BUF_LEN,
|
|
"mmc %d:1=boot%04d.bin fat %d 1;"
|
|
"%s fat %d 1",
|
|
bootseq, multiboot, bootseq,
|
|
CONFIG_SPL_FS_LOAD_PAYLOAD_NAME, bootseq);
|
|
break;
|
|
case QSPI_MODE_24BIT:
|
|
case QSPI_MODE_32BIT:
|
|
snprintf(buf, DFU_ALT_BUF_LEN,
|
|
"sf 0:0=boot.bin raw %x 0x1500000;"
|
|
"%s raw 0x%x 0x500000",
|
|
multiboot * SZ_32K, CONFIG_SPL_FS_LOAD_PAYLOAD_NAME,
|
|
CONFIG_SYS_SPI_U_BOOT_OFFS);
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
|
|
env_set("dfu_alt_info", buf);
|
|
puts("DFU alt info setting: done\n");
|
|
}
|
|
#endif
|