u-boot/configs/socfpga_agilex_defconfig
Tom Rini 75fc79e530 Convert CONFIG_SYS_MMC_MAX_BLK_COUNT to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_MMC_MAX_BLK_COUNT

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
2022-11-10 10:08:55 -05:00

87 lines
2.2 KiB
Text

CONFIG_ARM=y
CONFIG_COUNTER_FREQUENCY=400000000
CONFIG_ARCH_SOCFPGA=y
CONFIG_TEXT_BASE=0x1000
CONFIG_SYS_MALLOC_LEN=0x500000
CONFIG_NR_DRAM_BANKS=2
CONFIG_ENV_SIZE=0x1000
CONFIG_ENV_OFFSET=0x200
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="socfpga_agilex_socdk"
CONFIG_SPL_TEXT_BASE=0xFFE00000
CONFIG_SYS_PROMPT="SOCFPGA_AGILEX # "
CONFIG_TARGET_SOCFPGA_AGILEX_SOCDK=y
CONFIG_IDENT_STRING="socfpga_agilex"
CONFIG_SPL_FS_FAT=y
# CONFIG_PSCI_RESET is not set
CONFIG_SYS_LOAD_ADDR=0x02000000
CONFIG_SYS_MEMTEST_START=0x00000000
CONFIG_SYS_MEMTEST_END=0x3fe00000
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x101000
CONFIG_REMAKE_ELF=y
CONFIG_BOOTDELAY=5
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="earlycon"
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="run fatscript; run mmcload; run linux_qspi_enable; run mmcboot"
CONFIG_SPL_MAX_SIZE=0x40000
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
CONFIG_SPL_BSS_START_ADDR=0x3ff00000
CONFIG_SPL_BSS_MAX_SIZE=0x100000
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_STACK=0xffe3f000
CONFIG_SYS_SPL_MALLOC=y
CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x3fa00000
CONFIG_SYS_SPL_MALLOC_SIZE=0x500000
CONFIG_SPL_CACHE=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_SYS_SPI_U_BOOT_OFFS=0x3c00000
CONFIG_SPL_TARGET="spl/u-boot-spl-dtb.hex"
CONFIG_HUSH_PARSER=y
CONFIG_SYS_MAXARGS=64
CONFIG_SYS_PBSIZE=2082
CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_USE_BOOTFILE=y
CONFIG_BOOTFILE="Image"
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_SPL_ALTERA_SDRAM=y
CONFIG_DWAPB_GPIO=y
CONFIG_DM_I2C=y
CONFIG_SYS_I2C_DW=y
CONFIG_SYS_MMC_MAX_BLK_COUNT=256
CONFIG_MMC_DW=y
CONFIG_SF_DEFAULT_MODE=0x2003
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_PHY_MICREL=y
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_MII=y
CONFIG_DM_RESET=y
CONFIG_SPI=y
CONFIG_CADENCE_QSPI=y
CONFIG_DESIGNWARE_SPI=y
CONFIG_USB=y
CONFIG_USB_DWC2=y
CONFIG_USB_STORAGE=y
CONFIG_DESIGNWARE_WATCHDOG=y
CONFIG_WDT=y
# CONFIG_SPL_USE_TINY_PRINTF is not set
CONFIG_PANIC_HANG=y