Sean Anderson 93c3d32970 ls1046ardb: Add support for JTAG boot ... This adds support for booting entirely from JTAG while using a hard-coded RCW. With these steps, it is not necessary to program a "good" RCW using CodeWarrior. The method here can be performed with any JTAG adapter supported by OpenOCD, including the on-board CMSIS-DAP (albeit very slowly). These steps require LS1046A support in OpenOCD, which was added in [1]. [1] 5b70c1f679/ Signed-off-by: Sean Anderson <sean.anderson@seco.com> [trini: Add reference to doc/board/nxp/ls1046ardb.rst]		2022-04-01 16:56:44 -04:00
..
arm11	common: Drop net.h from common header	2020-05-18 17:33:31 -04:00
arm720t	Convert CONFIG_SKIP_LOWLEVEL_INIT et al to Kconfig	2021-08-31 17:47:49 -04:00
arm920t	Finish conversion of CONFIG_SYS_CLK_FREQ to Kconfig	2021-12-27 16:20:18 -05:00
arm926ejs	sunxi: f1c100s: Fix FEL registers restore	2022-03-03 01:24:06 +00:00
arm946es	Convert CONFIG_SKIP_LOWLEVEL_INIT et al to Kconfig	2021-08-31 17:47:49 -04:00
arm1136	arm: Remove flea3 board	2021-10-01 12:08:19 -04:00
arm1176	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
armv7	video: fsl: colibri_vf: Drop FSL DCU driver	2022-03-28 20:18:07 +02:00
armv7m	common: spl: move armv7m-specific code to spl_perform_fixups()	2022-01-18 08:31:02 -05:00
armv8	ls1046ardb: Add support for JTAG boot	2022-04-01 16:56:44 -04:00
pxa	Convert CONFIG_SKIP_LOWLEVEL_INIT et al to Kconfig	2021-08-31 17:47:49 -04:00
sa1100	Convert CONFIG_SKIP_LOWLEVEL_INIT et al to Kconfig	2021-08-31 17:47:49 -04:00
Makefile	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
u-boot-spl.lds	spl: fix linker size check off-by-one errors	2019-05-05 08:48:50 -04:00
u-boot.lds	ARM: Specify aligned address for secure section instead of using attributes	2018-09-07 09:11:42 -04:00