Stefan Eichenberger 44103cf331 colibri_imx6: fix RALAT and WALAT values ... Running a memtest in U-Boot and Linux shows that some Colibri iMX6 produce bitflips at temperatures above 60°C. This happens because the RALAT and WALAT values on the Colibri iMX6 are too low. The problems were introduced by commit 09dbac8174 ("mx6: ddr: Restore ralat/walat in write level calibration") before the calibration process overwrote the values and set them to the maximum value. With this commit, we make sure that the RALAT and WALAT values are set to the maximum values again. This has been proven to work for years. Fixes: 09dbac8174 ("mx6: ddr: Restore ralat/walat in write level calibration") Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>		2023-07-13 11:29:40 +02:00
..
colibri_imx6.c	colibri_imx6: fix RALAT and WALAT values	2023-07-13 11:29:40 +02:00
do_fuse.c	command: Remove the cmd_tbl_t typedef	2020-05-18 18:36:55 -04:00
Kconfig	arm: imx: initial support for colibri imx6	2016-12-16 10:03:43 +01:00
MAINTAINERS	colibri_imx6: synchronise device tree with linux	2022-07-25 16:12:00 +02:00
Makefile	arm: imx: initial support for colibri imx6	2016-12-16 10:03:43 +01:00
pf0100.c	common: Drop linux/delay.h from common header	2020-05-18 21:19:23 -04:00
pf0100.h	board: colibri_imx6: check for and report ecc errors in fuses	2019-04-13 20:30:09 +02:00
pf0100_otp.inc	colibri_imx6: change pmic fusing according to hw 1.1 requirements	2019-04-13 20:30:09 +02:00