mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 02:38:56 +00:00
3f7e032f70
The J7200 SoCs have 2 dual-core Arm Cortex-R5F processor (R5FSS) subsystems/clusters. One R5F cluster is present within the MCU domain (MCU_R5FSS0), and the other one is present within the MAIN domain (MAIN_R5FSS0). Each of these can be configured at boot time to be either run in a LockStep mode or in an Asymmetric Multi Processing (AMP) fashion in Split-mode. These subsystems have 64 KB each Tightly-Coupled Memory (TCM) internal memories for each core split between two banks - ATCM and BTCM (further interleaved into two banks). The TCMs of both Cores are combined in LockStep-mode to provide a larger 128 KB of memory. Add the DT node for the MAIN domain R5F cluster/subsystem, the two R5F cores are added as child nodes to the main cluster/subsystem node. The cluster is configured to run in Split-mode by default, with the ATCMs enabled to allow the R5 cores to execute code from DDR with boot-strapping code from ATCM. The inter-processor communication between the main A72 cores and these processors is achieved through shared memory and Mailboxes. Signed-off-by: Suman Anna <s-anna@ti.com>
383 lines
11 KiB
Text
383 lines
11 KiB
Text
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Device Tree Source for J7200 SoC Family Main Domain peripherals
|
|
*
|
|
* Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
|
|
*/
|
|
|
|
&cbass_main {
|
|
msmc_ram: sram@70000000 {
|
|
compatible = "mmio-sram";
|
|
reg = <0x0 0x70000000 0x0 0x100000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x0 0x70000000 0x100000>;
|
|
|
|
atf-sram@0 {
|
|
reg = <0x0 0x20000>;
|
|
};
|
|
};
|
|
|
|
gic500: interrupt-controller@1800000 {
|
|
compatible = "arm,gic-v3";
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
#interrupt-cells = <3>;
|
|
interrupt-controller;
|
|
reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */
|
|
<0x00 0x01900000 0x00 0x100000>; /* GICR */
|
|
|
|
/* vcpumntirq: virtual CPU interface maintenance interrupt */
|
|
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
gic_its: msi-controller@1820000 {
|
|
compatible = "arm,gic-v3-its";
|
|
reg = <0x00 0x01820000 0x00 0x10000>;
|
|
socionext,synquacer-pre-its = <0x1000000 0x400000>;
|
|
msi-controller;
|
|
#msi-cells = <1>;
|
|
};
|
|
};
|
|
|
|
main_navss: navss@30000000 {
|
|
compatible = "simple-mfd";
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>;
|
|
|
|
secure_proxy_main: mailbox@32c00000 {
|
|
compatible = "ti,am654-secure-proxy";
|
|
#mbox-cells = <1>;
|
|
reg-names = "target_data", "rt", "scfg";
|
|
reg = <0x00 0x32c00000 0x00 0x100000>,
|
|
<0x00 0x32400000 0x00 0x100000>,
|
|
<0x00 0x32800000 0x00 0x100000>;
|
|
interrupt-names = "rx_011";
|
|
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
};
|
|
|
|
main_pmx0: pinmux@11c000 {
|
|
compatible = "pinctrl-single";
|
|
/* Proxy 0 addressing */
|
|
reg = <0x0 0x11c000 0x0 0x2b4>;
|
|
#pinctrl-cells = <1>;
|
|
pinctrl-single,register-width = <32>;
|
|
pinctrl-single,function-mask = <0xffffffff>;
|
|
};
|
|
|
|
main_uart0: serial@2800000 {
|
|
compatible = "ti,j721e-uart", "ti,am654-uart";
|
|
reg = <0x00 0x02800000 0x00 0x100>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-frequency = <48000000>;
|
|
current-speed = <115200>;
|
|
power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
|
|
clocks = <&k3_clks 146 2>;
|
|
clock-names = "fclk";
|
|
};
|
|
|
|
main_uart1: serial@2810000 {
|
|
compatible = "ti,j721e-uart", "ti,am654-uart";
|
|
reg = <0x00 0x02810000 0x00 0x100>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-frequency = <48000000>;
|
|
current-speed = <115200>;
|
|
power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>;
|
|
clocks = <&k3_clks 278 2>;
|
|
clock-names = "fclk";
|
|
};
|
|
|
|
main_uart2: serial@2820000 {
|
|
compatible = "ti,j721e-uart", "ti,am654-uart";
|
|
reg = <0x00 0x02820000 0x00 0x100>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-frequency = <48000000>;
|
|
current-speed = <115200>;
|
|
power-domains = <&k3_pds 279 TI_SCI_PD_EXCLUSIVE>;
|
|
clocks = <&k3_clks 279 2>;
|
|
clock-names = "fclk";
|
|
};
|
|
|
|
main_uart3: serial@2830000 {
|
|
compatible = "ti,j721e-uart", "ti,am654-uart";
|
|
reg = <0x00 0x02830000 0x00 0x100>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-frequency = <48000000>;
|
|
current-speed = <115200>;
|
|
power-domains = <&k3_pds 280 TI_SCI_PD_EXCLUSIVE>;
|
|
clocks = <&k3_clks 280 2>;
|
|
clock-names = "fclk";
|
|
};
|
|
|
|
main_uart4: serial@2840000 {
|
|
compatible = "ti,j721e-uart", "ti,am654-uart";
|
|
reg = <0x00 0x02840000 0x00 0x100>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-frequency = <48000000>;
|
|
current-speed = <115200>;
|
|
power-domains = <&k3_pds 281 TI_SCI_PD_EXCLUSIVE>;
|
|
clocks = <&k3_clks 281 2>;
|
|
clock-names = "fclk";
|
|
};
|
|
|
|
main_uart5: serial@2850000 {
|
|
compatible = "ti,j721e-uart", "ti,am654-uart";
|
|
reg = <0x00 0x02850000 0x00 0x100>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-frequency = <48000000>;
|
|
current-speed = <115200>;
|
|
power-domains = <&k3_pds 282 TI_SCI_PD_EXCLUSIVE>;
|
|
clocks = <&k3_clks 282 2>;
|
|
clock-names = "fclk";
|
|
};
|
|
|
|
main_uart6: serial@2860000 {
|
|
compatible = "ti,j721e-uart", "ti,am654-uart";
|
|
reg = <0x00 0x02860000 0x00 0x100>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-frequency = <48000000>;
|
|
current-speed = <115200>;
|
|
power-domains = <&k3_pds 283 TI_SCI_PD_EXCLUSIVE>;
|
|
clocks = <&k3_clks 283 2>;
|
|
clock-names = "fclk";
|
|
};
|
|
|
|
main_uart7: serial@2870000 {
|
|
compatible = "ti,j721e-uart", "ti,am654-uart";
|
|
reg = <0x00 0x02870000 0x00 0x100>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-frequency = <48000000>;
|
|
current-speed = <115200>;
|
|
power-domains = <&k3_pds 284 TI_SCI_PD_EXCLUSIVE>;
|
|
clocks = <&k3_clks 284 2>;
|
|
clock-names = "fclk";
|
|
};
|
|
|
|
main_uart8: serial@2880000 {
|
|
compatible = "ti,j721e-uart", "ti,am654-uart";
|
|
reg = <0x00 0x02880000 0x00 0x100>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-frequency = <48000000>;
|
|
current-speed = <115200>;
|
|
power-domains = <&k3_pds 285 TI_SCI_PD_EXCLUSIVE>;
|
|
clocks = <&k3_clks 285 2>;
|
|
clock-names = "fclk";
|
|
};
|
|
|
|
main_uart9: serial@2890000 {
|
|
compatible = "ti,j721e-uart", "ti,am654-uart";
|
|
reg = <0x00 0x02890000 0x00 0x100>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
|
|
clock-frequency = <48000000>;
|
|
current-speed = <115200>;
|
|
power-domains = <&k3_pds 286 TI_SCI_PD_EXCLUSIVE>;
|
|
clocks = <&k3_clks 286 2>;
|
|
clock-names = "fclk";
|
|
};
|
|
|
|
main_sdhci0: sdhci@4f80000 {
|
|
compatible = "ti,j721e-sdhci-8bit";
|
|
reg = <0x0 0x04f80000 0x0 0x260>, <0x0 0x4f88000 0x0 0x134>;
|
|
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
|
|
power-domains = <&k3_pds 91 TI_SCI_PD_EXCLUSIVE>;
|
|
clock-names = "clk_xin", "clk_ahb";
|
|
clocks = <&k3_clks 91 3>, <&k3_clks 91 0>;
|
|
ti,otap-del-sel-legacy = <0x0>;
|
|
ti,otap-del-sel-mmc-hs = <0x0>;
|
|
ti,otap-del-sel-ddr52 = <0x6>;
|
|
ti,otap-del-sel-hs200 = <0x8>;
|
|
ti,otap-del-sel-hs400 = <0x0>;
|
|
ti,strobe-sel = <0x77>;
|
|
ti,trm-icp = <0x8>;
|
|
bus-width = <8>;
|
|
mmc-hs200-1_8v;
|
|
mmc-ddr-1_8v;
|
|
dma-coherent;
|
|
};
|
|
|
|
main_sdhci1: sdhci@4fb0000 {
|
|
compatible = "ti,j721e-sdhci-4bit";
|
|
reg = <0x0 0x04fb0000 0x0 0x260>, <0x0 0x4fb8000 0x0 0x134>;
|
|
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
|
|
power-domains = <&k3_pds 92 TI_SCI_PD_EXCLUSIVE>;
|
|
clock-names = "clk_xin", "clk_ahb";
|
|
clocks = <&k3_clks 92 2>, <&k3_clks 92 1>;
|
|
ti,otap-del-sel-legacy = <0x0>;
|
|
ti,otap-del-sel-sd-hs = <0x0>;
|
|
ti,otap-del-sel-sdr12 = <0xf>;
|
|
ti,otap-del-sel-sdr25 = <0xf>;
|
|
ti,otap-del-sel-sdr50 = <0xc>;
|
|
ti,otap-del-sel-sdr104 = <0x5>;
|
|
ti,otap-del-sel-ddr50 = <0xc>;
|
|
dma-coherent;
|
|
};
|
|
|
|
main_i2c0: i2c@2000000 {
|
|
compatible = "ti,j721e-i2c", "ti,omap4-i2c";
|
|
reg = <0x0 0x2000000 0x0 0x100>;
|
|
interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clock-names = "fck";
|
|
clocks = <&k3_clks 187 1>;
|
|
power-domains = <&k3_pds 187 TI_SCI_PD_EXCLUSIVE>;
|
|
};
|
|
|
|
main_i2c1: i2c@2010000 {
|
|
compatible = "ti,j721e-i2c", "ti,omap4-i2c";
|
|
reg = <0x0 0x2010000 0x0 0x100>;
|
|
interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clock-names = "fck";
|
|
clocks = <&k3_clks 188 1>;
|
|
power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>;
|
|
};
|
|
|
|
main_i2c2: i2c@2020000 {
|
|
compatible = "ti,j721e-i2c", "ti,omap4-i2c";
|
|
reg = <0x0 0x2020000 0x0 0x100>;
|
|
interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clock-names = "fck";
|
|
clocks = <&k3_clks 189 1>;
|
|
power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>;
|
|
};
|
|
|
|
main_i2c3: i2c@2030000 {
|
|
compatible = "ti,j721e-i2c", "ti,omap4-i2c";
|
|
reg = <0x0 0x2030000 0x0 0x100>;
|
|
interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clock-names = "fck";
|
|
clocks = <&k3_clks 190 1>;
|
|
power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>;
|
|
};
|
|
|
|
main_i2c4: i2c@2040000 {
|
|
compatible = "ti,j721e-i2c", "ti,omap4-i2c";
|
|
reg = <0x0 0x2040000 0x0 0x100>;
|
|
interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clock-names = "fck";
|
|
clocks = <&k3_clks 191 1>;
|
|
power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>;
|
|
};
|
|
|
|
main_i2c5: i2c@2050000 {
|
|
compatible = "ti,j721e-i2c", "ti,omap4-i2c";
|
|
reg = <0x0 0x2050000 0x0 0x100>;
|
|
interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clock-names = "fck";
|
|
clocks = <&k3_clks 192 1>;
|
|
power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
|
|
};
|
|
|
|
main_i2c6: i2c@2060000 {
|
|
compatible = "ti,j721e-i2c", "ti,omap4-i2c";
|
|
reg = <0x0 0x2060000 0x0 0x100>;
|
|
interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clock-names = "fck";
|
|
clocks = <&k3_clks 193 1>;
|
|
power-domains = <&k3_pds 193 TI_SCI_PD_EXCLUSIVE>;
|
|
};
|
|
|
|
usbss0: cdns_usb@4104000 {
|
|
compatible = "ti,j721e-usb";
|
|
reg = <0x00 0x4104000 0x00 0x100>;
|
|
dma-coherent;
|
|
power-domains = <&k3_pds 288 TI_SCI_PD_EXCLUSIVE>;
|
|
clocks = <&k3_clks 288 12>, <&k3_clks 288 3>;
|
|
clock-names = "usb2_refclk", "lpm_clk";
|
|
assigned-clocks = <&k3_clks 288 12>; /* USB2_REFCLK */
|
|
assigned-clock-parents = <&k3_clks 288 13>; /* HFOSC0 */
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
usb0: usb@6000000 {
|
|
compatible = "cdns,usb3";
|
|
reg = <0x00 0x6000000 0x00 0x10000>,
|
|
<0x00 0x6010000 0x00 0x10000>,
|
|
<0x00 0x6020000 0x00 0x10000>;
|
|
reg-names = "otg", "xhci", "dev";
|
|
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
|
|
<GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, /* irq.6 */
|
|
<GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; /* otgirq.0 */
|
|
interrupt-names = "host",
|
|
"peripheral",
|
|
"otg";
|
|
maximum-speed = "super-speed";
|
|
dr_mode = "otg";
|
|
};
|
|
};
|
|
|
|
main_r5fss0: r5fss@5c00000 {
|
|
compatible = "ti,j7200-r5fss";
|
|
lockstep-mode = <0>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x5c00000 0x00 0x5c00000 0x20000>,
|
|
<0x5d00000 0x00 0x5d00000 0x20000>;
|
|
power-domains = <&k3_pds 243 TI_SCI_PD_EXCLUSIVE>;
|
|
|
|
main_r5fss0_core0: r5f@5c00000 {
|
|
compatible = "ti,j7200-r5f";
|
|
reg = <0x5c00000 0x00010000>,
|
|
<0x5c10000 0x00010000>;
|
|
reg-names = "atcm", "btcm";
|
|
ti,sci = <&dmsc>;
|
|
ti,sci-dev-id = <245>;
|
|
ti,sci-proc-ids = <0x06 0xFF>;
|
|
resets = <&k3_reset 245 1>;
|
|
firmware-name = "j7200-main-r5f0_0-fw";
|
|
atcm-enable = <1>;
|
|
btcm-enable = <1>;
|
|
loczrama = <1>;
|
|
};
|
|
|
|
main_r5fss0_core1: r5f@5d00000 {
|
|
compatible = "ti,j7200-r5f";
|
|
reg = <0x5d00000 0x00008000>,
|
|
<0x5d10000 0x00008000>;
|
|
reg-names = "atcm", "btcm";
|
|
ti,sci = <&dmsc>;
|
|
ti,sci-dev-id = <246>;
|
|
ti,sci-proc-ids = <0x07 0xFF>;
|
|
resets = <&k3_reset 246 1>;
|
|
firmware-name = "j7200-main-r5f0_1-fw";
|
|
atcm-enable = <1>;
|
|
btcm-enable = <1>;
|
|
loczrama = <1>;
|
|
};
|
|
};
|
|
};
|