mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 17:58:23 +00:00
6802d7951c
The Meerkat96 board, based on the NXP i.MX7D SoC, is a member of 96Boards community and complies with all Consumer Edition board specifications. https://www.novtech.com/products/meerkat96.html https://www.96boards.org/product/imx7-96/ The initial supported/tested devices include: - Debug serial - SD - USB Host (with Ethernet) With these support, it's good enough for loading Linux Kernel from SD or Ethernet over USB. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Peng Fan <peng.fan@nxp.com> Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> |
||
|---|---|---|
| .. | ||
| imximage.cfg | ||
| Kconfig | ||
| MAINTAINERS | ||
| Makefile | ||
| meerkat96.c | ||
| README | ||
* Build U-Boot for Meerkat96 board $ make mrproper $ make meerkat96_defconfig $ make It will generate the U-Boot binary called u-boot-dtb.imx * Install U-Boot to MicroSD card Plug MicroSD card to a Linux machine (with card reader), find the device name and replace sd[x] with the name in the following command. $ sudo dd if=u-boot-dtb.imx of=/dev/sd[x] bs=512 seek=2 It will install U-Boot to MicroSD card at 1KiB offset. Insert the card to Meerkat96 MicroSD slot, power up the board, and U-Boot should boot from the card.