mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-30 06:53:09 +00:00
c05ed00afb
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
80 lines
1.9 KiB
C
80 lines
1.9 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2012
|
|
* eInfochips Ltd. <www.einfochips.com>
|
|
* Written-by: Ajay Bhargav <contact@8051projects.net>
|
|
*
|
|
* (C) Copyright 2009
|
|
* Marvell Semiconductor <www.marvell.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <usb.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/armada100.h>
|
|
#include <asm/arch/utmi-armada100.h>
|
|
#include <linux/delay.h>
|
|
|
|
static int utmi_phy_init(void)
|
|
{
|
|
struct armd1usb_phy_reg *phy_regs =
|
|
(struct armd1usb_phy_reg *)UTMI_PHY_BASE;
|
|
int timeout;
|
|
|
|
setbits_le32(&phy_regs->utmi_ctrl, INPKT_DELAY_SOF | PLL_PWR_UP);
|
|
udelay(1000);
|
|
setbits_le32(&phy_regs->utmi_ctrl, PHY_PWR_UP);
|
|
|
|
clrbits_le32(&phy_regs->utmi_pll, PLL_FBDIV_MASK | PLL_REFDIV_MASK);
|
|
setbits_le32(&phy_regs->utmi_pll, N_DIVIDER << PLL_FBDIV | M_DIVIDER);
|
|
|
|
setbits_le32(&phy_regs->utmi_tx, PHSEL_VAL << CK60_PHSEL);
|
|
|
|
/* Calibrate pll */
|
|
timeout = 10000;
|
|
while (--timeout && ((readl(&phy_regs->utmi_pll) & PLL_READY) == 0))
|
|
;
|
|
if (!timeout)
|
|
return -1;
|
|
|
|
udelay(200);
|
|
setbits_le32(&phy_regs->utmi_pll, VCOCAL_START);
|
|
udelay(400);
|
|
clrbits_le32(&phy_regs->utmi_pll, VCOCAL_START);
|
|
|
|
udelay(200);
|
|
setbits_le32(&phy_regs->utmi_tx, RCAL_START);
|
|
udelay(400);
|
|
clrbits_le32(&phy_regs->utmi_tx, RCAL_START);
|
|
|
|
timeout = 10000;
|
|
while (--timeout && ((readl(&phy_regs->utmi_pll) & PLL_READY) == 0))
|
|
;
|
|
if (!timeout)
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Initialize USB host controller's UTMI Physical interface
|
|
*/
|
|
int utmi_init(void)
|
|
{
|
|
struct armd1mpmu_registers *mpmu_regs =
|
|
(struct armd1mpmu_registers *)ARMD1_MPMU_BASE;
|
|
|
|
struct armd1apmu_registers *apmu_regs =
|
|
(struct armd1apmu_registers *)ARMD1_APMU_BASE;
|
|
|
|
/* Turn on 26Mhz ref clock for UTMI PLL */
|
|
setbits_le32(&mpmu_regs->acgr, APB2_26M_EN | AP_26M);
|
|
|
|
/* USB Clock reset */
|
|
writel(USB_SPH_AXICLK_EN, &apmu_regs->usbcrc);
|
|
writel(USB_SPH_AXICLK_EN | USB_SPH_AXI_RST, &apmu_regs->usbcrc);
|
|
|
|
/* Initialize UTMI transceiver */
|
|
return utmi_phy_init();
|
|
}
|