Stephan Gerhold 845d9cf61c usb: musb-new: Add glue driver for ST-Ericsson Ux500 ... The ST-Ericsson DB8500 SoC contains a MUSB OTG controller which supports both host and gadget mode. For some reason there is nothing special about it - add a simple glue driver for Ux500 that literally just sets up MUSB together with a generic PHY. There are no SoC-specific registers etc needed to make USB work. The new Ux500 glue driver is only tested to work with DM_USB and DM_USB_GADGET. Both host and gadget mode work fine on the u8500 "stemmy" board that is already present in U-Boot. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Stephan Gerhold <stephan@gerhold.net>		2021-07-14 16:48:16 -04:00
..
cdns3	usb: cdns3: cdns3-ti: Fix clk_get_by_name() to get the correct name	2021-06-08 22:01:20 +02:00
common	common: Drop asm/global_data.h from common header	2021-02-02 15:33:42 -05:00
dwc3	usb: dwc3-generic: Disable host driver definition if gadget only	2021-05-16 19:01:45 +02:00
emul	dm: define LOG_CATEGORY for all uclass	2021-07-06 10:38:03 -06:00
eth	Prepare v2021.01-rc5	2021-01-05 16:20:26 -05:00
gadget	dm: define LOG_CATEGORY for all uclass	2021-07-06 10:38:03 -06:00
host	arm: Remove spear600 boards and the rest of SPEAr support	2021-07-07 22:22:42 -04:00
mtu3	usb: mtu3: flush cache for next GPD	2021-03-10 11:48:09 +01:00
musb	usb: musb: Ensure that we set musb dynamic FIFO buffer for every endpoint	2021-03-03 04:12:46 +01:00
musb-new	usb: musb-new: Add glue driver for ST-Ericsson Ux500	2021-07-14 16:48:16 -04:00
phy	common: Drop asm/global_data.h from common header	2021-02-02 15:33:42 -05:00
ulpi	common: Drop linux/delay.h from common header	2020-05-18 21:19:23 -04:00
Kconfig	usb: USB keyboard requires DM_KEYBOARD	2021-03-03 04:12:46 +01:00