mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-19 11:18:28 +00:00
702e6014f1
Also drop a few files referring to no longer / not yet supported boards. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Prafulla Wadaskar <prafulla@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Kim Phillips <kim.phillips@freescale.com> Cc: Andy Fleming <afleming@gmail.com> Cc: Jason Jin <jason.jin@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com> Acked-by: Stefano Babic <sbabic@denx.de> Acked-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
59 lines
1.8 KiB
Text
59 lines
1.8 KiB
Text
Matrix Vision MergerBox
|
|
-----------------------
|
|
|
|
1. Board Description
|
|
|
|
The MergerBox is a 120x160mm single board computing platform
|
|
for 3D Full-HD digital video processing.
|
|
|
|
Power Supply is 10-32VDC.
|
|
|
|
2 System Components
|
|
|
|
2.1 CPU
|
|
Freescale MPC8377 CPU running at 800MHz core and 333MHz csb.
|
|
256 MByte DDR-II memory @ 333MHz data rate.
|
|
64 MByte Nor Flash on local bus.
|
|
1 GByte Nand Flash on FCM.
|
|
1 Vitesse VSC8601 RGMII ethernet Phys.
|
|
1 USB host controller over ULPI I/F with 4-Port hub.
|
|
2 serial ports. Console running on ttyS0 @ 115200 8N1.
|
|
1 mPCIe expansion slot (PCIe x1 + USB) used for Wifi/Bt.
|
|
2 PCIe x1 busses on local mPCIe and cutom expansion connector.
|
|
2 SATA host ports.
|
|
System configuration (HRCW) is taken from I2C EEPROM.
|
|
|
|
2.2 Graphics
|
|
SM107 emebedded video controller driving a 5" 800x480 TFT panel.
|
|
Connected over 32-Bit/66MHz PCI utilizing 4 MByte embedded memory.
|
|
|
|
2.3 FPGA
|
|
Altera Cyclone-IV EP4C115 with several PCI DMA engines.
|
|
Connects to 7x Gennum 3G-SDI transceivers as video interconnect
|
|
as well as a HDMI v1.4 compliant output for 3D monitoring.
|
|
Utilizes two more DDR-II controllers providing 256MB memory.
|
|
|
|
2.4 I2C
|
|
Bus1:
|
|
AD7418 @ 0x50 for voltage/temp. monitoring.
|
|
SX8650 @ 0x90 touch controller for HMI.
|
|
EEPROM @ 0xA0 for system setup (HRCW etc.) + vendor specifics.
|
|
Bus2:
|
|
mPCIe SMBus
|
|
SiI9022A @ 0x72/0xC0 HDMI transmitter.
|
|
TCA6416A @ 0x40 + 0x42 16-Bit I/O expander.
|
|
LMH1983 @ 0xCA video PLL.
|
|
DS1338C @ 0xD0 real-time clock with embedded crystal.
|
|
9FG104 @ 0xDC 4x 100MHz LVDS SerDes reference clock.
|
|
|
|
3 Flash layout.
|
|
|
|
reset vector is 0x00000100, i.e. low boot.
|
|
|
|
00000000 u-boot binary.
|
|
00100000 FPGA raw bit file.
|
|
00300000 FIT image holding kernel, dtb and rescue squashfs.
|
|
03d00000 u-boot environment.
|
|
03e00000 splash image
|
|
|
|
mtd partitions are propagated to linux kernel via device tree blob.
|