mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
189ec2fee6
Device tree alignment with Linux kernel v5.18-rc2: - ARM: dts: stm32: Add support for the emtrion emSBC-Argon (only the pincontrol part) - ARM: dts: stm32: Drop duplicate status okay from DHCOM gpioc node - ARM: dts: stm32: add st,stm32-sdmmc2 compatible on stm32mp151 - ARM: dts: stm32: fix AV96 board SAI2 pin muxing on stm32mp15 - ARM: dts: stm32: use exti 19 as main interrupt to support RTC wakeup on stm32mp157 - ARM: dts: stm32: add DMA configuration to UART nodes on stm32mp151 - ARM: dts: stm32: keep uart4 behavior on * - ARM: dts: stm32: Correct masks for GIC PPI interrupts on stm32mp15 Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
329 lines
6.4 KiB
Text
329 lines
6.4 KiB
Text
// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
|
|
/*
|
|
* Copyright (C) 2019-2020 Marek Vasut <marex@denx.de>
|
|
*/
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/pwm/pwm.h>
|
|
|
|
/ {
|
|
aliases {
|
|
serial0 = &uart4;
|
|
serial1 = &usart3;
|
|
serial2 = &uart8;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
clk_ext_audio_codec: clock-codec {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <24000000>;
|
|
};
|
|
|
|
display_bl: display-bl {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&pwm2 3 500000 PWM_POLARITY_INVERTED>;
|
|
brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>;
|
|
default-brightness-level = <8>;
|
|
enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>;
|
|
power-supply = <®_panel_bl>;
|
|
status = "okay";
|
|
};
|
|
|
|
gpio-keys-polled {
|
|
compatible = "gpio-keys-polled";
|
|
poll-interval = <20>;
|
|
|
|
/*
|
|
* The EXTi IRQ line 3 is shared with ethernet,
|
|
* so mark this as polled GPIO key.
|
|
*/
|
|
button-0 {
|
|
label = "TA1-GPIO-A";
|
|
linux,code = <KEY_A>;
|
|
gpios = <&gpiof 3 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
/*
|
|
* The EXTi IRQ line 6 is shared with touchscreen,
|
|
* so mark this as polled GPIO key.
|
|
*/
|
|
button-1 {
|
|
label = "TA2-GPIO-B";
|
|
linux,code = <KEY_B>;
|
|
gpios = <&gpiod 6 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
/*
|
|
* The EXTi IRQ line 0 is shared with PMIC,
|
|
* so mark this as polled GPIO key.
|
|
*/
|
|
button-2 {
|
|
label = "TA3-GPIO-C";
|
|
linux,code = <KEY_C>;
|
|
gpios = <&gpiog 0 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
|
|
button-3 {
|
|
label = "TA4-GPIO-D";
|
|
linux,code = <KEY_D>;
|
|
gpios = <&gpiod 12 GPIO_ACTIVE_LOW>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
led {
|
|
compatible = "gpio-leds";
|
|
|
|
led-0 {
|
|
label = "green:led5";
|
|
gpios = <&gpioc 6 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
status = "disabled";
|
|
};
|
|
|
|
led-1 {
|
|
label = "green:led6";
|
|
gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led-2 {
|
|
label = "green:led7";
|
|
gpios = <&gpioi 2 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led-3 {
|
|
label = "green:led8";
|
|
gpios = <&gpioi 3 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
};
|
|
|
|
panel {
|
|
compatible = "edt,etm0700g0edh6";
|
|
backlight = <&display_bl>;
|
|
power-supply = <®_panel_bl>;
|
|
|
|
port {
|
|
lcd_panel_in: endpoint {
|
|
remote-endpoint = <&lcd_display_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
reg_panel_bl: regulator-panel-bl {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "panel_backlight";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <®_panel_supply>;
|
|
};
|
|
|
|
reg_panel_supply: regulator-panel-supply {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "panel_supply";
|
|
regulator-min-microvolt = <24000000>;
|
|
regulator-max-microvolt = <24000000>;
|
|
};
|
|
|
|
sound {
|
|
compatible = "audio-graph-card";
|
|
routing =
|
|
"MIC_IN", "Capture",
|
|
"Capture", "Mic Bias",
|
|
"Playback", "HP_OUT";
|
|
dais = <&sai2a_port &sai2b_port>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&cec {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&cec_pins_a>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c2 { /* Header X22 */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c2_pins_a>;
|
|
i2c-scl-rising-time-ns = <185>;
|
|
i2c-scl-falling-time-ns = <20>;
|
|
status = "okay";
|
|
/* spare dmas for other usage */
|
|
/delete-property/dmas;
|
|
/delete-property/dma-names;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c5 { /* Header X21 */
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c5_pins_a>;
|
|
i2c-scl-rising-time-ns = <185>;
|
|
i2c-scl-falling-time-ns = <20>;
|
|
status = "okay";
|
|
/* spare dmas for other usage */
|
|
/delete-property/dmas;
|
|
/delete-property/dma-names;
|
|
|
|
sgtl5000: codec@a {
|
|
compatible = "fsl,sgtl5000";
|
|
reg = <0x0a>;
|
|
#sound-dai-cells = <0>;
|
|
clocks = <&clk_ext_audio_codec>;
|
|
VDDA-supply = <&v3v3>;
|
|
VDDIO-supply = <&vdd>;
|
|
|
|
sgtl5000_port: port {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
sgtl5000_tx_endpoint: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&sai2a_endpoint>;
|
|
frame-master = <&sgtl5000_tx_endpoint>;
|
|
bitclock-master = <&sgtl5000_tx_endpoint>;
|
|
};
|
|
|
|
sgtl5000_rx_endpoint: endpoint@1 {
|
|
reg = <1>;
|
|
remote-endpoint = <&sai2b_endpoint>;
|
|
frame-master = <&sgtl5000_rx_endpoint>;
|
|
bitclock-master = <&sgtl5000_rx_endpoint>;
|
|
};
|
|
};
|
|
|
|
};
|
|
|
|
touchscreen@38 {
|
|
compatible = "edt,edt-ft5406";
|
|
reg = <0x38>;
|
|
interrupt-parent = <&gpioc>;
|
|
interrupts = <6 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
|
|
};
|
|
};
|
|
|
|
<dc {
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <<dc_pins_b>;
|
|
pinctrl-1 = <<dc_sleep_pins_b>;
|
|
status = "okay";
|
|
|
|
port {
|
|
lcd_display_out: endpoint {
|
|
remote-endpoint = <&lcd_panel_in>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&sai2 {
|
|
clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
|
|
clock-names = "pclk", "x8k", "x11k";
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&sai2a_pins_b &sai2b_pins_b>;
|
|
pinctrl-1 = <&sai2a_sleep_pins_b &sai2b_sleep_pins_b>;
|
|
status = "okay";
|
|
|
|
sai2a: audio-controller@4400b004 {
|
|
#clock-cells = <0>;
|
|
dma-names = "tx";
|
|
clocks = <&rcc SAI2_K>;
|
|
clock-names = "sai_ck";
|
|
status = "okay";
|
|
|
|
sai2a_port: port {
|
|
sai2a_endpoint: endpoint {
|
|
remote-endpoint = <&sgtl5000_tx_endpoint>;
|
|
format = "i2s";
|
|
mclk-fs = <512>;
|
|
dai-tdm-slot-num = <2>;
|
|
dai-tdm-slot-width = <16>;
|
|
};
|
|
};
|
|
};
|
|
|
|
sai2b: audio-controller@4400b024 {
|
|
dma-names = "rx";
|
|
st,sync = <&sai2a 2>;
|
|
clocks = <&rcc SAI2_K>, <&sai2a>;
|
|
clock-names = "sai_ck", "MCLK";
|
|
status = "okay";
|
|
|
|
sai2b_port: port {
|
|
sai2b_endpoint: endpoint {
|
|
remote-endpoint = <&sgtl5000_rx_endpoint>;
|
|
format = "i2s";
|
|
mclk-fs = <512>;
|
|
dai-tdm-slot-num = <2>;
|
|
dai-tdm-slot-width = <16>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&timers2 {
|
|
/* spare dmas for other usage (un-delete to enable pwm capture) */
|
|
/delete-property/dmas;
|
|
/delete-property/dma-names;
|
|
status = "okay";
|
|
pwm2: pwm {
|
|
pinctrl-0 = <&pwm2_pins_a>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
};
|
|
timer@1 {
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&usart3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&usart3_pins_a>;
|
|
/delete-property/dmas;
|
|
/delete-property/dma-names;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart8 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart8_pins_a &uart8_rtscts_pins_a>;
|
|
uart-has-rtscts;
|
|
/delete-property/dmas;
|
|
/delete-property/dma-names;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbh_ehci {
|
|
phys = <&usbphyc_port0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg_hs {
|
|
dr_mode = "otg";
|
|
pinctrl-0 = <&usbotg_hs_pins_a>;
|
|
pinctrl-names = "default";
|
|
phy-names = "usb2-phy";
|
|
phys = <&usbphyc_port1 0>;
|
|
vbus-supply = <&vbus_otg>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbphyc {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbphyc_port0 {
|
|
phy-supply = <&vdd_usb>;
|
|
};
|
|
|
|
&usbphyc_port1 {
|
|
phy-supply = <&vdd_usb>;
|
|
};
|