mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-27 15:12:21 +00:00
550650ddd0
This patch removes the PPC4xx UART driver. Instead the common NS16550 driver is used, since all PPC4xx SoC's use this peripheral device. The file 4xx_uart.c now only implements the UART clock calculation function which also sets the SoC internal UART divisors. All PPC4xx board config headers are changed to use this common NS16550 driver now. Tested on these boards: acadia, canyonlands, katmai, kilauea, sequoia, zeus Signed-off-by: Stefan Roese <sr@denx.de>
222 lines
10 KiB
C
222 lines
10 KiB
C
/*
|
|
* (C) Copyright 2010
|
|
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#ifndef _PPC460EX_GT_H_
|
|
#define _PPC460EX_GT_H_
|
|
|
|
#define CONFIG_SDRAM_PPC4xx_IBM_DDR2 /* IBM DDR(2) controller */
|
|
|
|
#define CONFIG_NAND_NDFC
|
|
|
|
/*
|
|
* Some SoC specific registers
|
|
*/
|
|
|
|
/* Memory mapped registers */
|
|
#define CONFIG_SYS_PERIPHERAL_BASE 0xef600000 /* Internal Peripherals */
|
|
|
|
#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_PERIPHERAL_BASE + 0x0300)
|
|
#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_PERIPHERAL_BASE + 0x0400)
|
|
#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_PERIPHERAL_BASE + 0x0500)
|
|
#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_PERIPHERAL_BASE + 0x0600)
|
|
|
|
#define GPIO0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x0b00)
|
|
#define GPIO1_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x0c00)
|
|
|
|
/* DCR */
|
|
#define AHB_TOP 0x00a4
|
|
#define AHB_BOT 0x00a5
|
|
|
|
/* SDR */
|
|
#define SDR0_PCI0 0x01c0
|
|
#define SDR0_AHB_CFG 0x0370
|
|
#define SDR0_USB2HOST_CFG 0x0371
|
|
#define SDR0_ETH_PLL 0x4102
|
|
#define SDR0_ETH_CFG 0x4103
|
|
#define SDR0_ETH_STS 0x4104
|
|
|
|
/*
|
|
* Register bits and masks
|
|
*/
|
|
#define SDR0_SDSTP1_PAE_MASK (0x80000000 >> 13)
|
|
#define SDR0_SDSTP1_PISE_MASK (0x80000000 >> 15)
|
|
|
|
/* CUST0 Customer Configuration Register0 */
|
|
#define SDR0_CUST0_MUX_E_N_G_MASK 0xC0000000 /* Mux_Emac_NDFC_GPIO */
|
|
#define SDR0_CUST0_MUX_EMAC_SEL 0x40000000 /* Emac Selection */
|
|
#define SDR0_CUST0_MUX_NDFC_SEL 0x80000000 /* NDFC Selection */
|
|
#define SDR0_CUST0_MUX_GPIO_SEL 0xC0000000 /* GPIO Selection */
|
|
|
|
#define SDR0_CUST0_NDFC_EN_MASK 0x20000000 /* NDFC Enable Mask */
|
|
#define SDR0_CUST0_NDFC_ENABLE 0x20000000 /* NDFC Enable */
|
|
#define SDR0_CUST0_NDFC_DISABLE 0x00000000 /* NDFC Disable */
|
|
|
|
#define SDR0_CUST0_NDFC_BW_MASK 0x10000000 /* NDFC Boot Width */
|
|
#define SDR0_CUST0_NDFC_BW_16_BIT 0x10000000 /* NDFC Boot Width = 16 Bit */
|
|
#define SDR0_CUST0_NDFC_BW_8_BIT 0x00000000 /* NDFC Boot Width = 8 Bit */
|
|
|
|
#define SDR0_CUST0_NDFC_BP_MASK 0x0F000000 /* NDFC Boot Page */
|
|
#define SDR0_CUST0_NDFC_BP_ENCODE(n) ((((u32)(n)) & 0xF) << 24)
|
|
#define SDR0_CUST0_NDFC_BP_DECODE(n) ((((u32)(n)) >> 24) & 0xF)
|
|
|
|
#define SDR0_CUST0_NDFC_BAC_MASK 0x00C00000 /* NDFC Boot Address Cycle */
|
|
#define SDR0_CUST0_NDFC_BAC_ENCODE(n) ((((u32)(n)) & 0x3) << 22)
|
|
#define SDR0_CUST0_NDFC_BAC_DECODE(n) ((((u32)(n)) >> 22) & 0x3)
|
|
|
|
#define SDR0_CUST0_NDFC_ARE_MASK 0x00200000 /* NDFC Auto Read Enable */
|
|
#define SDR0_CUST0_NDFC_ARE_ENABLE 0x00200000 /* NDFC Auto Read Enable */
|
|
#define SDR0_CUST0_NDFC_ARE_DISABLE 0x00000000 /* NDFC Auto Read Disable */
|
|
|
|
#define SDR0_CUST0_NRB_MASK 0x00100000 /* NDFC Ready / Busy */
|
|
#define SDR0_CUST0_NRB_BUSY 0x00100000 /* Busy */
|
|
#define SDR0_CUST0_NRB_READY 0x00000000 /* Ready */
|
|
|
|
#define SDR0_CUST0_NDRSC_MASK 0x0000FFF0 /* NDFC Device Reset Count Mask */
|
|
#define SDR0_CUST0_NDRSC_ENCODE(n) ((((u32)(n)) & 0xFFF) << 4)
|
|
#define SDR0_CUST0_NDRSC_DECODE(n) ((((u32)(n)) >> 4) & 0xFFF)
|
|
|
|
#define SDR0_CUST0_CHIPSELGAT_MASK 0x0000000F /* Chip Select Gating Mask */
|
|
#define SDR0_CUST0_CHIPSELGAT_DIS 0x00000000 /* Chip Select Gating Disable */
|
|
#define SDR0_CUST0_CHIPSELGAT_ENALL 0x0000000F /*All Chip Select Gating Enable*/
|
|
#define SDR0_CUST0_CHIPSELGAT_EN0 0x00000008 /* Chip Select0 Gating Enable */
|
|
#define SDR0_CUST0_CHIPSELGAT_EN1 0x00000004 /* Chip Select1 Gating Enable */
|
|
#define SDR0_CUST0_CHIPSELGAT_EN2 0x00000002 /* Chip Select2 Gating Enable */
|
|
#define SDR0_CUST0_CHIPSELGAT_EN3 0x00000001 /* Chip Select3 Gating Enable */
|
|
|
|
/* Ethernet PLL Configuration Register (SDR0_ETH_PLL) */
|
|
#define SDR0_ETH_PLL_PLLLOCK 0x80000000 /* Ethernet PLL lock indication */
|
|
|
|
/* Ethernet Configuration Register (SDR0_ETH_CFG) */
|
|
#define SDR0_ETH_CFG_SGMII3_LPBK 0x00800000 /*SGMII3 port loopback
|
|
enable */
|
|
#define SDR0_ETH_CFG_SGMII2_LPBK 0x00400000 /*SGMII2 port loopback
|
|
enable */
|
|
#define SDR0_ETH_CFG_SGMII1_LPBK 0x00200000 /*SGMII1 port loopback
|
|
enable */
|
|
#define SDR0_ETH_CFG_SGMII0_LPBK 0x00100000 /*SGMII0 port loopback
|
|
enable */
|
|
#define SDR0_ETH_CFG_SGMII_MASK 0x00070000 /*SGMII Mask */
|
|
#define SDR0_ETH_CFG_SGMII2_ENABLE 0x00040000 /*SGMII2 port enable */
|
|
#define SDR0_ETH_CFG_SGMII1_ENABLE 0x00020000 /*SGMII1 port enable */
|
|
#define SDR0_ETH_CFG_SGMII0_ENABLE 0x00010000 /*SGMII0 port enable */
|
|
#define SDR0_ETH_CFG_TAHOE1_BYPASS 0x00002000 /*TAHOE1 Bypass selector */
|
|
#define SDR0_ETH_CFG_TAHOE0_BYPASS 0x00001000 /*TAHOE0 Bypass selector */
|
|
#define SDR0_ETH_CFG_EMAC3_PHY_CLK_SEL 0x00000800 /*EMAC 3 PHY clock selector*/
|
|
#define SDR0_ETH_CFG_EMAC2_PHY_CLK_SEL 0x00000400 /*EMAC 2 PHY clock selector*/
|
|
#define SDR0_ETH_CFG_EMAC1_PHY_CLK_SEL 0x00000200 /*EMAC 1 PHY clock selector*/
|
|
#define SDR0_ETH_CFG_EMAC0_PHY_CLK_SEL 0x00000100 /*EMAC 0 PHY clock selector*/
|
|
#define SDR0_ETH_CFG_EMAC_2_1_SWAP 0x00000080 /*Swap EMAC2 with EMAC1 */
|
|
#define SDR0_ETH_CFG_EMAC_0_3_SWAP 0x00000040 /*Swap EMAC0 with EMAC3 */
|
|
#define SDR0_ETH_CFG_MDIO_SEL_MASK 0x00000030 /*MDIO source selector mask*/
|
|
#define SDR0_ETH_CFG_MDIO_SEL_EMAC0 0x00000000 /*MDIO source - EMAC0 */
|
|
#define SDR0_ETH_CFG_MDIO_SEL_EMAC1 0x00000010 /*MDIO source - EMAC1 */
|
|
#define SDR0_ETH_CFG_MDIO_SEL_EMAC2 0x00000020 /*MDIO source - EMAC2 */
|
|
#define SDR0_ETH_CFG_MDIO_SEL_EMAC3 0x00000030 /*MDIO source - EMAC3 */
|
|
#define SDR0_ETH_CFG_GMC1_BRIDGE_SEL 0x00000002 /*GMC Port 1 bridge
|
|
selector */
|
|
#define SDR0_ETH_CFG_GMC0_BRIDGE_SEL 0x00000001 /*GMC Port 0 bridge
|
|
selector */
|
|
|
|
#define SDR0_SRST0_BGO 0x80000000 /* PLB to OPB bridge */
|
|
#define SDR0_SRST0_PLB4 0x40000000 /* PLB4 arbiter */
|
|
#define SDR0_SRST0_EBC 0x20000000 /* External bus controller */
|
|
#define SDR0_SRST0_OPB 0x10000000 /* OPB arbiter */
|
|
#define SDR0_SRST0_UART0 0x08000000 /* Universal asynchronous receiver/
|
|
transmitter 0 */
|
|
#define SDR0_SRST0_UART1 0x04000000 /* Universal asynchronous receiver/
|
|
transmitter 1 */
|
|
#define SDR0_SRST0_IIC0 0x02000000 /* Inter integrated circuit 0 */
|
|
#define SDR0_SRST0_IIC1 0x01000000 /* Inter integrated circuit 1 */
|
|
#define SDR0_SRST0_GPIO0 0x00800000 /* General purpose I/O 0 */
|
|
#define SDR0_SRST0_GPT 0x00400000 /* General purpose timer */
|
|
#define SDR0_SRST0_DMC 0x00200000 /* DDR SDRAM memory controller */
|
|
#define SDR0_SRST0_PCI 0x00100000 /* PCI */
|
|
#define SDR0_SRST0_CPM0 0x00020000 /* Clock and power management */
|
|
#define SDR0_SRST0_IMU 0x00010000 /* I2O DMA */
|
|
#define SDR0_SRST0_UIC0 0x00008000 /* Universal interrupt controller 0*/
|
|
#define SDR0_SRST0_UIC1 0x00004000 /* Universal interrupt controller 1*/
|
|
#define SDR0_SRST0_SRAM 0x00002000 /* Universal interrupt controller 0*/
|
|
#define SDR0_SRST0_UIC2 0x00001000 /* Universal interrupt controller 2*/
|
|
#define SDR0_SRST0_UIC3 0x00000800 /* Universal interrupt controller 3*/
|
|
#define SDR0_SRST0_OCM 0x00000400 /* Universal interrupt controller 0*/
|
|
#define SDR0_SRST0_UART2 0x00000200 /* Universal asynchronous receiver/
|
|
transmitter 2 */
|
|
#define SDR0_SRST0_MAL 0x00000100 /* Media access layer */
|
|
#define SDR0_SRST0_GPTR 0x00000040 /* General purpose timer */
|
|
#define SDR0_SRST0_L2CACHE 0x00000004 /* L2 Cache */
|
|
#define SDR0_SRST0_UART3 0x00000002 /* Universal asynchronous receiver/
|
|
transmitter 3 */
|
|
#define SDR0_SRST0_GPIO1 0x00000001 /* General purpose I/O 1 */
|
|
|
|
#define SDR0_SRST1_RLL 0x80000000 /* SRIO RLL */
|
|
#define SDR0_SRST1_SCP 0x40000000 /* Serial communications port */
|
|
#define SDR0_SRST1_PLBARB 0x20000000 /* PLB Arbiter */
|
|
#define SDR0_SRST1_EIPPKP 0x10000000 /* EIPPPKP */
|
|
#define SDR0_SRST1_EIP94 0x08000000 /* EIP 94 */
|
|
#define SDR0_SRST1_EMAC0 0x04000000 /* Ethernet media access
|
|
controller 0 */
|
|
#define SDR0_SRST1_EMAC1 0x02000000 /* Ethernet media access
|
|
controller 1 */
|
|
#define SDR0_SRST1_EMAC2 0x01000000 /* Ethernet media access
|
|
controller 2 */
|
|
#define SDR0_SRST1_EMAC3 0x00800000 /* Ethernet media access
|
|
controller 3 */
|
|
#define SDR0_SRST1_ZMII 0x00400000 /* Ethernet ZMII/RMII/SMII */
|
|
#define SDR0_SRST1_RGMII0 0x00200000 /* Ethernet RGMII/RTBI 0 */
|
|
#define SDR0_SRST1_RGMII1 0x00100000 /* Ethernet RGMII/RTBI 1 */
|
|
#define SDR0_SRST1_DMA4 0x00080000 /* DMA to PLB4 */
|
|
#define SDR0_SRST1_DMA4CH 0x00040000 /* DMA Channel to PLB4 */
|
|
#define SDR0_SRST1_SATAPHY 0x00020000 /* Serial ATA PHY */
|
|
#define SDR0_SRST1_SRIODEV 0x00010000 /* Serial Rapid IO core, PCS, and
|
|
serdes */
|
|
#define SDR0_SRST1_SRIOPCS 0x00008000 /* Serial Rapid IO core and PCS */
|
|
#define SDR0_SRST1_NDFC 0x00004000 /* Nand flash controller */
|
|
#define SDR0_SRST1_SRIOPLB 0x00002000 /* Serial Rapid IO PLB */
|
|
#define SDR0_SRST1_ETHPLL 0x00001000 /* Ethernet PLL */
|
|
#define SDR0_SRST1_TAHOE1 0x00000800 /* Ethernet Tahoe 1 */
|
|
#define SDR0_SRST1_TAHOE0 0x00000400 /* Ethernet Tahoe 0 */
|
|
#define SDR0_SRST1_SGMII0 0x00000200 /* Ethernet SGMII 0 */
|
|
#define SDR0_SRST1_SGMII1 0x00000100 /* Ethernet SGMII 1 */
|
|
#define SDR0_SRST1_SGMII2 0x00000080 /* Ethernet SGMII 2 */
|
|
#define SDR0_SRST1_AHB 0x00000040 /* PLB4XAHB bridge */
|
|
#define SDR0_SRST1_USBOTGPHY 0x00000020 /* USB 2.0 OTG PHY */
|
|
#define SDR0_SRST1_USBOTG 0x00000010 /* USB 2.0 OTG controller */
|
|
#define SDR0_SRST1_USBHOST 0x00000008 /* USB 2.0 Host controller */
|
|
#define SDR0_SRST1_AHBDMAC 0x00000004 /* AHB DMA controller */
|
|
#define SDR0_SRST1_AHBICM 0x00000002 /* AHB inter-connect matrix */
|
|
#define SDR0_SRST1_SATA 0x00000001 /* Serial ATA controller */
|
|
|
|
#define PLLSYS0_FWD_DIV_A_MASK 0x000000f0 /* Fwd Div A */
|
|
#define PLLSYS0_FWD_DIV_B_MASK 0x0000000f /* Fwd Div B */
|
|
#define PLLSYS0_FB_DIV_MASK 0x0000ff00 /* Feedback divisor */
|
|
#define PLLSYS0_OPB_DIV_MASK 0x0c000000 /* OPB Divisor */
|
|
#define PLLSYS0_PLBEDV0_DIV_MASK 0xe0000000 /* PLB Early Clock Divisor */
|
|
#define PLLSYS0_PERCLK_DIV_MASK 0x03000000 /* Peripheral Clk Divisor */
|
|
#define PLLSYS0_SEL_MASK 0x18000000 /* 0 = PLL, 1 = PerClk */
|
|
|
|
#define CPR0_ICFG_RLI_MASK 0x80000000
|
|
|
|
#define CPR0_PLLC_RST 0x80000000
|
|
#define CPR0_PLLC_ENG 0x40000000
|
|
|
|
#define PCIL0_BRDGOPT1 (PCIL0_CFGBASE + 0x0040)
|
|
#define PCIL0_BRDGOPT2 (PCIL0_CFGBASE + 0x0044)
|
|
|
|
#endif /* _PPC460EX_GT_H_ */
|