u-boot/board/gdsys/common/Makefile
Dirk Eibach d494cdb97e mpc83xx: Add gazerbeam board
The gdsys gazerbeam board is based on a Freescale MPC8308 SOC.
It boots from NOR-Flash, kernel and rootfs are stored on
SD-Card.

On board peripherals include:
- 2x 10/100 Mbit/s Ethernet (optional)

Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc>
Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21 08:03:38 +02:00

18 lines
654 B
Makefile

# SPDX-License-Identifier: GPL-2.0+
#
# (C) Copyright 2007
# Stefan Roese, DENX Software Engineering, sr@denx.de.
obj-$(CONFIG_SYS_FPGA_COMMON) += fpga.o
obj-$(CONFIG_CMD_IOLOOP) += cmd_ioloop.o
obj-$(CONFIG_CONTROLCENTERD) += dp501.o
obj-$(CONFIG_TARGET_HRCON) += osd.o mclink.o dp501.o phy.o ioep-fpga.o fanctrl.o
obj-$(CONFIG_TARGET_STRIDER) += mclink.o dp501.o phy.o ioep-fpga.o adv7611.o ch7301.o
obj-$(CONFIG_TARGET_STRIDER) += fanctrl.o
obj-$(CONFIG_STRIDER_CON) += osd.o
obj-$(CONFIG_STRIDER_CON_DP) += osd.o
obj-$(CONFIG_TARGET_GAZERBEAM) += osd.o ihs_mdio.o ioep-fpga.o
ifdef CONFIG_OSD
obj-$(CONFIG_GDSYS_LEGACY_OSD_CMDS) += osd_cmd.o
endif