u-boot/board/rockchip/evb_rk3399/evb-rk3399.c
Kever Yang 975e4abad2 rockchip: correct the bank0 ram size
The bank0 ram size should be the DRAM size minus reserved size,
the DRAM size may be 1GB, 2GB, 4GB, we can not hard code it.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Added DECLARE_GLOBAL_DATA_PTR for RK3328, RK3368 and RK3399:
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-11 12:13:45 +02:00

69 lines
1.5 KiB
C

/*
* (C) Copyright 2016 Rockchip Electronics Co., Ltd
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <dm.h>
#include <ram.h>
#include <dm/pinctrl.h>
#include <dm/uclass-internal.h>
#include <asm/arch/periph.h>
#include <power/regulator.h>
DECLARE_GLOBAL_DATA_PTR;
int board_init(void)
{
struct udevice *pinctrl, *regulator;
int ret;
/*
* The PWM do not have decicated interrupt number in dts and can
* not get periph_id by pinctrl framework, so let's init them here.
* The PWM2 and PWM3 are for pwm regulater.
*/
ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl);
if (ret) {
debug("%s: Cannot find pinctrl device\n", __func__);
goto out;
}
/* Enable pwm0 for panel backlight */
ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_PWM0);
if (ret) {
debug("%s PWM0 pinctrl init fail! (ret=%d)\n", __func__, ret);
goto out;
}
ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_PWM2);
if (ret) {
debug("%s PWM2 pinctrl init fail!\n", __func__);
goto out;
}
ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_PWM3);
if (ret) {
debug("%s PWM3 pinctrl init fail!\n", __func__);
goto out;
}
ret = regulators_enable_boot_on(false);
if (ret)
debug("%s: Cannot enable boot on regulator\n", __func__);
ret = regulator_get_by_platname("vcc5v0_host", &regulator);
if (ret) {
debug("%s vcc5v0_host init fail! ret %d\n", __func__, ret);
goto out;
}
ret = regulator_set_enable(regulator, true);
if (ret) {
debug("%s vcc5v0-host-en set fail!\n", __func__);
goto out;
}
out:
return 0;
}