Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-09-21 15:12:04 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/common/cmd_ide.c
wdenk 4d13cbad1c * Patch by Tolunay Orkun, 5 Mar 2004: 
Fix early board initialization for Cogent CSB272 board

* Patch by Ed Okerson, 3 Mar 2004:
  fix CFI flash writes for little endian systems

* Patch by Reinhard Meyer, 01 Mar 2004:
  generalize USB and IDE support for MPC5200 with according
  changes to IceCube.h and TOP5200.h
  add Am29LV256 256 MBit FLASH support for TOP5200 boards
  add info about USB and IDE to README
2004-03-14 14:09:05 +00:00

2040 lines
50 KiB
C
Raw Blame History

/*
* (C) Copyright 2000-2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*/
/*
* IDE support
*/
#include <common.h>
#include <config.h>
#include <watchdog.h>
#include <command.h>
#include <image.h>
#include <asm/byteorder.h>
#if defined(CONFIG_IDE_8xx_DIRECT) || defined(CONFIG_IDE_PCMCIA)
# include <pcmcia.h>
#endif
#ifdef CONFIG_8xx
# include <mpc8xx.h>
#endif
#ifdef CONFIG_MPC5xxx
#include <mpc5xxx.h>
#endif
#include <ide.h>
#include <ata.h>
#ifdef CONFIG_STATUS_LED
# include <status_led.h>
#endif
#ifndef __PPC__
#include <asm/io.h>
#ifdef __MIPS__
/* Macros depend on this variable */
static unsigned long mips_io_port_base = 0;
#endif
#endif
#ifdef CONFIG_SHOW_BOOT_PROGRESS
# include <status_led.h>
# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg)
#else
# define SHOW_BOOT_PROGRESS(arg)
#endif
#undef IDE_DEBUG
#ifdef IDE_DEBUG
#define PRINTF(fmt,args...) printf (fmt ,##args)
#else
#define PRINTF(fmt,args...)
#endif
#if (CONFIG_COMMANDS & CFG_CMD_IDE)
#ifdef CONFIG_IDE_8xx_DIRECT
/* Timings for IDE Interface
*
* SETUP / LENGTH / HOLD - cycles valid for 50 MHz clk
* 70 165 30 PIO-Mode 0, [ns]
* 4 9 2 [Cycles]
* 50 125 20 PIO-Mode 1, [ns]
* 3 7 2 [Cycles]
* 30 100 15 PIO-Mode 2, [ns]
* 2 6 1 [Cycles]
* 30 80 10 PIO-Mode 3, [ns]
* 2 5 1 [Cycles]
* 25 70 10 PIO-Mode 4, [ns]
* 2 4 1 [Cycles]
*/
const static pio_config_t pio_config_ns [IDE_MAX_PIO_MODE+1] =
{
/* Setup Length Hold */
{ 70, 165, 30 }, /* PIO-Mode 0, [ns] */
{ 50, 125, 20 }, /* PIO-Mode 1, [ns] */
{ 30, 101, 15 }, /* PIO-Mode 2, [ns] */
{ 30, 80, 10 }, /* PIO-Mode 3, [ns] */
{ 25, 70, 10 }, /* PIO-Mode 4, [ns] */
};
static pio_config_t pio_config_clk [IDE_MAX_PIO_MODE+1];
#ifndef CFG_PIO_MODE
#define CFG_PIO_MODE 0 /* use a relaxed default */
#endif
static int pio_mode = CFG_PIO_MODE;
/* Make clock cycles and always round up */
#define PCMCIA_MK_CLKS( t, T ) (( (t) * (T) + 999U ) / 1000U )
#endif /* CONFIG_IDE_8xx_DIRECT */
/* ------------------------------------------------------------------------- */
/* Current I/O Device */
static int curr_device = -1;
/* Current offset for IDE0 / IDE1 bus access */
ulong ide_bus_offset[CFG_IDE_MAXBUS] = {
#if defined(CFG_ATA_IDE0_OFFSET)
CFG_ATA_IDE0_OFFSET,
#endif
#if defined(CFG_ATA_IDE1_OFFSET) && (CFG_IDE_MAXBUS > 1)
CFG_ATA_IDE1_OFFSET,
#endif
};
#define ATA_CURR_BASE(dev) (CFG_ATA_BASE_ADDR+ide_bus_offset[IDE_BUS(dev)])
#ifndef CONFIG_AMIGAONEG3SE
static int ide_bus_ok[CFG_IDE_MAXBUS];
#else
static int ide_bus_ok[CFG_IDE_MAXBUS] = {0,};
#endif
static block_dev_desc_t ide_dev_desc[CFG_IDE_MAXDEVICE];
/* ------------------------------------------------------------------------- */
#ifdef CONFIG_IDE_LED
#if !defined(CONFIG_KUP4K) && !defined(CONFIG_HMI10)
static void ide_led (uchar led, uchar status);
#else
extern void ide_led (uchar led, uchar status);
#endif
#else
#ifndef CONFIG_AMIGAONEG3SE
#define ide_led(a,b) /* dummy */
#else
extern void ide_led(uchar led, uchar status);
#define LED_IDE1 1
#define LED_IDE2 2
#define CONFIG_IDE_LED 1
#define DEVICE_LED(x) 1
#endif
#endif
#ifdef CONFIG_IDE_RESET
static void ide_reset (void);
#else
#define ide_reset() /* dummy */
#endif
static void ide_ident (block_dev_desc_t *dev_desc);
static uchar ide_wait (int dev, ulong t);
#define IDE_TIME_OUT 2000 /* 2 sec timeout */
#define ATAPI_TIME_OUT 7000 /* 7 sec timeout (5 sec seems to work...) */
#define IDE_SPIN_UP_TIME_OUT 5000 /* 5 sec spin-up timeout */
static void __inline__ ide_outb(int dev, int port, unsigned char val);
static unsigned char __inline__ ide_inb(int dev, int port);
static void input_data(int dev, ulong *sect_buf, int words);
static void output_data(int dev, ulong *sect_buf, int words);
static void ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len);
#ifdef CONFIG_ATAPI
static void atapi_inquiry(block_dev_desc_t *dev_desc);
ulong atapi_read (int device, lbaint_t blknr, ulong blkcnt, ulong *buffer);
#endif
#ifdef CONFIG_IDE_8xx_DIRECT
static void set_pcmcia_timing (int pmode);
#endif
/* ------------------------------------------------------------------------- */
int do_ide (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
int rcode = 0;
switch (argc) {
case 0:
case 1:
printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
case 2:
if (strncmp(argv[1],"res",3) == 0) {
puts ("\nReset IDE"
#ifdef CONFIG_IDE_8xx_DIRECT
" on PCMCIA " PCMCIA_SLOT_MSG
#endif
": ");
ide_init ();
return 0;
} else if (strncmp(argv[1],"inf",3) == 0) {
int i;
putc ('\n');
for (i=0; i<CFG_IDE_MAXDEVICE; ++i) {
if (ide_dev_desc[i].type==DEV_TYPE_UNKNOWN)
continue; /* list only known devices */
printf ("IDE device %d: ", i);
dev_print(&ide_dev_desc[i]);
}
return 0;
} else if (strncmp(argv[1],"dev",3) == 0) {
if ((curr_device < 0) || (curr_device >= CFG_IDE_MAXDEVICE)) {
puts ("\nno IDE devices available\n");
return 1;
}
printf ("\nIDE device %d: ", curr_device);
dev_print(&ide_dev_desc[curr_device]);
return 0;
} else if (strncmp(argv[1],"part",4) == 0) {
int dev, ok;
for (ok=0, dev=0; dev<CFG_IDE_MAXDEVICE; ++dev) {
if (ide_dev_desc[dev].part_type!=PART_TYPE_UNKNOWN) {
++ok;
if (dev)
putc ('\n');
print_part(&ide_dev_desc[dev]);
}
}
if (!ok) {
puts ("\nno IDE devices available\n");
rcode ++;
}
return rcode;
}
printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
case 3:
if (strncmp(argv[1],"dev",3) == 0) {
int dev = (int)simple_strtoul(argv[2], NULL, 10);
printf ("\nIDE device %d: ", dev);
if (dev >= CFG_IDE_MAXDEVICE) {
puts ("unknown device\n");
return 1;
}
dev_print(&ide_dev_desc[dev]);
/*ide_print (dev);*/
if (ide_dev_desc[dev].type == DEV_TYPE_UNKNOWN) {
return 1;
}
curr_device = dev;
puts ("... is now current device\n");
return 0;
} else if (strncmp(argv[1],"part",4) == 0) {
int dev = (int)simple_strtoul(argv[2], NULL, 10);
if (ide_dev_desc[dev].part_type!=PART_TYPE_UNKNOWN) {
print_part(&ide_dev_desc[dev]);
} else {
printf ("\nIDE device %d not available\n", dev);
rcode = 1;
}
return rcode;
#if 0
} else if (strncmp(argv[1],"pio",4) == 0) {
int mode = (int)simple_strtoul(argv[2], NULL, 10);
if ((mode >= 0) && (mode <= IDE_MAX_PIO_MODE)) {
puts ("\nSetting ");
pio_mode = mode;
ide_init ();
} else {
printf ("\nInvalid PIO mode %d (0 ... %d only)\n",
mode, IDE_MAX_PIO_MODE);
}
return;
#endif
}
printf ("Usage:\n%s\n", cmdtp->usage);
return 1;
default:
/* at least 4 args */
if (strcmp(argv[1],"read") == 0) {
ulong addr = simple_strtoul(argv[2], NULL, 16);
#if CFG_64BIT_STRTOUL
lbaint_t blk = simple_strtoull(argv[3], NULL, 16);
#else
lbaint_t blk = simple_strtoul(argv[3], NULL, 16);
#endif
ulong cnt = simple_strtoul(argv[4], NULL, 16);
ulong n;
printf ("\nIDE read: device %d block # %qd, count %ld ... ",
curr_device, blk, cnt);
n = ide_dev_desc[curr_device].block_read (curr_device,
blk, cnt,
(ulong *)addr);
/* flush cache after read */
flush_cache (addr, cnt*ide_dev_desc[curr_device].blksz);
printf ("%ld blocks read: %s\n",
n, (n==cnt) ? "OK" : "ERROR");
if (n==cnt) {
return 0;
} else {
return 1;
}
} else if (strcmp(argv[1],"write") == 0) {
ulong addr = simple_strtoul(argv[2], NULL, 16);
#if CFG_64BIT_STRTOUL
lbaint_t blk = simple_strtoull(argv[3], NULL, 16);
#else
lbaint_t blk = simple_strtoul(argv[3], NULL, 16);
#endif
ulong cnt = simple_strtoul(argv[4], NULL, 16);
ulong n;
printf ("\nIDE write: device %d block # %qd, count %ld ... ",
curr_device, blk, cnt);
n = ide_write (curr_device, blk, cnt, (ulong *)addr);
printf ("%ld blocks written: %s\n",
n, (n==cnt) ? "OK" : "ERROR");
if (n==cnt) {
return 0;
} else {
return 1;
}
} else {
printf ("Usage:\n%s\n", cmdtp->usage);
rcode = 1;
}
return rcode;
}
}
int do_diskboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
char *boot_device = NULL;
char *ep;
int dev, part = 0;
ulong cnt;
ulong addr;
disk_partition_t info;
image_header_t *hdr;
int rcode = 0;
switch (argc) {
case 1:
addr = CFG_LOAD_ADDR;
boot_device = getenv ("bootdevice");
break;
case 2:
addr = simple_strtoul(argv[1], NULL, 16);
boot_device = getenv ("bootdevice");
break;
case 3:
addr = simple_strtoul(argv[1], NULL, 16);
boot_device = argv[2];
break;
default:
printf ("Usage:\n%s\n", cmdtp->usage);
SHOW_BOOT_PROGRESS (-1);
return 1;
}
if (!boot_device) {
puts ("\n** No boot device **\n");
SHOW_BOOT_PROGRESS (-1);
return 1;
}
dev = simple_strtoul(boot_device, &ep, 16);
if (ide_dev_desc[dev].type==DEV_TYPE_UNKNOWN) {
printf ("\n** Device %d not available\n", dev);
SHOW_BOOT_PROGRESS (-1);
return 1;
}
if (*ep) {
if (*ep != ':') {
puts ("\n** Invalid boot device, use `dev[:part]' **\n");
SHOW_BOOT_PROGRESS (-1);
return 1;
}
part = simple_strtoul(++ep, NULL, 16);
}
if (get_partition_info (&ide_dev_desc[dev], part, &info)) {
SHOW_BOOT_PROGRESS (-1);
return 1;
}
if ((strncmp(info.type, BOOT_PART_TYPE, sizeof(info.type)) != 0) &&
(strncmp(info.type, BOOT_PART_COMP, sizeof(info.type)) != 0)) {
printf ("\n** Invalid partition type \"%.32s\""
" (expect \"" BOOT_PART_TYPE "\")\n",
info.type);
SHOW_BOOT_PROGRESS (-1);
return 1;
}
printf ("\nLoading from IDE device %d, partition %d: "
"Name: %.32s Type: %.32s\n",
dev, part, info.name, info.type);
PRINTF ("First Block: %ld, # of blocks: %ld, Block Size: %ld\n",
info.start, info.size, info.blksz);
if (ide_dev_desc[dev].block_read (dev, info.start, 1, (ulong *)addr) != 1) {
printf ("** Read error on %d:%d\n", dev, part);
SHOW_BOOT_PROGRESS (-1);
return 1;
}
hdr = (image_header_t *)addr;
if (ntohl(hdr->ih_magic) == IH_MAGIC) {
print_image_hdr (hdr);
cnt = (ntohl(hdr->ih_size) + sizeof(image_header_t));
cnt += info.blksz - 1;
cnt /= info.blksz;
cnt -= 1;
} else {
printf("\n** Bad Magic Number **\n");
SHOW_BOOT_PROGRESS (-1);
return 1;
}
if (ide_dev_desc[dev].block_read (dev, info.start+1, cnt,
(ulong *)(addr+info.blksz)) != cnt) {
printf ("** Read error on %d:%d\n", dev, part);
SHOW_BOOT_PROGRESS (-1);
return 1;
}
/* Loading ok, update default load address */
load_addr = addr;
/* Check if we should attempt an auto-start */
if (((ep = getenv("autostart")) != NULL) && (strcmp(ep,"yes") == 0)) {
char *local_args[2];
extern int do_bootm (cmd_tbl_t *, int, int, char *[]);
local_args[0] = argv[0];
local_args[1] = NULL;
printf ("Automatic boot of image at addr 0x%08lX ...\n", addr);
do_bootm (cmdtp, 0, 1, local_args);
rcode = 1;
}
return rcode;
}
/* ------------------------------------------------------------------------- */
void ide_init (void)
{
#ifdef CONFIG_IDE_8xx_DIRECT
DECLARE_GLOBAL_DATA_PTR;
volatile immap_t *immr = (immap_t *)CFG_IMMR;
volatile pcmconf8xx_t *pcmp = &(immr->im_pcmcia);
#endif
unsigned char c;
int i, bus;
#ifdef CONFIG_AMIGAONEG3SE
unsigned int max_bus_scan;
unsigned int ata_reset_time;
char *s;
#endif
#ifdef CONFIG_IDE_8xx_PCCARD
extern int pcmcia_on (void);
extern int ide_devices_found; /* Initialized in check_ide_device() */
#endif /* CONFIG_IDE_8xx_PCCARD */
#ifdef CONFIG_IDE_PREINIT
extern int ide_preinit (void);
WATCHDOG_RESET();
if (ide_preinit ()) {
puts ("ide_preinit failed\n");
return;
}
#endif /* CONFIG_IDE_PREINIT */
#ifdef CONFIG_IDE_8xx_PCCARD
extern int pcmcia_on (void);
extern int ide_devices_found; /* Initialized in check_ide_device() */
WATCHDOG_RESET();
ide_devices_found = 0;
/* initialize the PCMCIA IDE adapter card */
pcmcia_on();
if (!ide_devices_found)
return;
udelay (1000000); /* 1 s */
#endif /* CONFIG_IDE_8xx_PCCARD */
WATCHDOG_RESET();
#ifdef CONFIG_IDE_8xx_DIRECT
/* Initialize PIO timing tables */
for (i=0; i <= IDE_MAX_PIO_MODE; ++i) {
pio_config_clk[i].t_setup = PCMCIA_MK_CLKS(pio_config_ns[i].t_setup,
gd->bus_clk);
pio_config_clk[i].t_length = PCMCIA_MK_CLKS(pio_config_ns[i].t_length,
gd->bus_clk);
pio_config_clk[i].t_hold = PCMCIA_MK_CLKS(pio_config_ns[i].t_hold,
gd->bus_clk);
PRINTF ("PIO Mode %d: setup=%2d ns/%d clk"
" len=%3d ns/%d clk"
" hold=%2d ns/%d clk\n",
i,
pio_config_ns[i].t_setup, pio_config_clk[i].t_setup,
pio_config_ns[i].t_length, pio_config_clk[i].t_length,
pio_config_ns[i].t_hold, pio_config_clk[i].t_hold);
}
#endif /* CONFIG_IDE_8xx_DIRECT */
/* Reset the IDE just to be sure.
* Light LED's to show
*/
ide_led ((LED_IDE1 | LED_IDE2), 1); /* LED's on */
ide_reset (); /* ATAPI Drives seems to need a proper IDE Reset */
#ifdef CONFIG_IDE_8xx_DIRECT
/* PCMCIA / IDE initialization for common mem space */
pcmp->pcmc_pgcrb = 0;
/* start in PIO mode 0 - most relaxed timings */
pio_mode = 0;
set_pcmcia_timing (pio_mode);
#endif /* CONFIG_IDE_8xx_DIRECT */
/*
* Wait for IDE to get ready.
* According to spec, this can take up to 31 seconds!
*/
#ifndef CONFIG_AMIGAONEG3SE
for (bus=0; bus<CFG_IDE_MAXBUS; ++bus) {
int dev = bus * (CFG_IDE_MAXDEVICE / CFG_IDE_MAXBUS);
#else
s = getenv("ide_maxbus");
if (s)
max_bus_scan = simple_strtol(s, NULL, 10);
else
max_bus_scan = CFG_IDE_MAXBUS;
for (bus=0; bus<max_bus_scan; ++bus) {
int dev = bus * (CFG_IDE_MAXDEVICE / max_bus_scan);
#endif
#ifdef CONFIG_IDE_8xx_PCCARD
/* Skip non-ide devices from probing */
if ((ide_devices_found & (1 << bus)) == 0) {
ide_led ((LED_IDE1 | LED_IDE2), 0); /* LED's off */
continue;
}
#endif
printf ("Bus %d: ", bus);
ide_bus_ok[bus] = 0;
/* Select device
*/
udelay (100000); /* 100 ms */
ide_outb (dev, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(dev));
udelay (100000); /* 100 ms */
#ifdef CONFIG_AMIGAONEG3SE
ata_reset_time = ATA_RESET_TIME;
s = getenv("ide_reset_timeout");
if (s) ata_reset_time = 2*simple_strtol(s, NULL, 10);
#endif
i = 0;
do {
udelay (10000); /* 10 ms */
c = ide_inb (dev, ATA_STATUS);
i++;
#ifdef CONFIG_AMIGAONEG3SE
if (i > (ata_reset_time * 100)) {
#else
if (i > (ATA_RESET_TIME * 100)) {
#endif
puts ("** Timeout **\n");
ide_led ((LED_IDE1 | LED_IDE2), 0); /* LED's off */
#ifdef CONFIG_AMIGAONEG3SE
/* If this is the second bus, the first one was OK */
if (bus != 0) {
ide_bus_ok[bus] = 0;
goto skip_bus;
}
#endif
return;
}
if ((i >= 100) && ((i%100)==0)) {
putc ('.');
}
} while (c & ATA_STAT_BUSY);
if (c & (ATA_STAT_BUSY | ATA_STAT_FAULT)) {
puts ("not available ");
PRINTF ("Status = 0x%02X ", c);
#ifndef CONFIG_ATAPI /* ATAPI Devices do not set DRDY */
} else if ((c & ATA_STAT_READY) == 0) {
puts ("not available ");
PRINTF ("Status = 0x%02X ", c);
#endif
} else {
puts ("OK ");
ide_bus_ok[bus] = 1;
}
WATCHDOG_RESET();
}
#ifdef CONFIG_AMIGAONEG3SE
skip_bus:
#endif
putc ('\n');
ide_led ((LED_IDE1 | LED_IDE2), 0); /* LED's off */
curr_device = -1;
for (i=0; i<CFG_IDE_MAXDEVICE; ++i) {
#ifdef CONFIG_IDE_LED
int led = (IDE_BUS(i) == 0) ? LED_IDE1 : LED_IDE2;
#endif
ide_dev_desc[i].type=DEV_TYPE_UNKNOWN;
ide_dev_desc[i].if_type=IF_TYPE_IDE;
ide_dev_desc[i].dev=i;
ide_dev_desc[i].part_type=PART_TYPE_UNKNOWN;
ide_dev_desc[i].blksz=0;
ide_dev_desc[i].lba=0;
ide_dev_desc[i].block_read=ide_read;
if (!ide_bus_ok[IDE_BUS(i)])
continue;
ide_led (led, 1); /* LED on */
ide_ident(&ide_dev_desc[i]);
ide_led (led, 0); /* LED off */
dev_print(&ide_dev_desc[i]);
/* ide_print (i); */
if ((ide_dev_desc[i].lba > 0) && (ide_dev_desc[i].blksz > 0)) {
init_part (&ide_dev_desc[i]); /* initialize partition type */
if (curr_device < 0)
curr_device = i;
}
}
WATCHDOG_RESET();
}
/* ------------------------------------------------------------------------- */
block_dev_desc_t * ide_get_dev(int dev)
{
return ((block_dev_desc_t *)&ide_dev_desc[dev]);
}
#ifdef CONFIG_IDE_8xx_DIRECT
static void
set_pcmcia_timing (int pmode)
{
volatile immap_t *immr = (immap_t *)CFG_IMMR;
volatile pcmconf8xx_t *pcmp = &(immr->im_pcmcia);
ulong timings;
PRINTF ("Set timing for PIO Mode %d\n", pmode);
timings = PCMCIA_SHT(pio_config_clk[pmode].t_hold)
| PCMCIA_SST(pio_config_clk[pmode].t_setup)
| PCMCIA_SL (pio_config_clk[pmode].t_length)
;
/* IDE 0
*/
pcmp->pcmc_pbr0 = CFG_PCMCIA_PBR0;
pcmp->pcmc_por0 = CFG_PCMCIA_POR0
#if (CFG_PCMCIA_POR0 != 0)
| timings
#endif
;
PRINTF ("PBR0: %08x POR0: %08x\n", pcmp->pcmc_pbr0, pcmp->pcmc_por0);
pcmp->pcmc_pbr1 = CFG_PCMCIA_PBR1;
pcmp->pcmc_por1 = CFG_PCMCIA_POR1
#if (CFG_PCMCIA_POR1 != 0)
| timings
#endif
;
PRINTF ("PBR1: %08x POR1: %08x\n", pcmp->pcmc_pbr1, pcmp->pcmc_por1);
pcmp->pcmc_pbr2 = CFG_PCMCIA_PBR2;
pcmp->pcmc_por2 = CFG_PCMCIA_POR2
#if (CFG_PCMCIA_POR2 != 0)
| timings
#endif
;
PRINTF ("PBR2: %08x POR2: %08x\n", pcmp->pcmc_pbr2, pcmp->pcmc_por2);
pcmp->pcmc_pbr3 = CFG_PCMCIA_PBR3;
pcmp->pcmc_por3 = CFG_PCMCIA_POR3
#if (CFG_PCMCIA_POR3 != 0)
| timings
#endif
;
PRINTF ("PBR3: %08x POR3: %08x\n", pcmp->pcmc_pbr3, pcmp->pcmc_por3);
/* IDE 1
*/
pcmp->pcmc_pbr4 = CFG_PCMCIA_PBR4;
pcmp->pcmc_por4 = CFG_PCMCIA_POR4
#if (CFG_PCMCIA_POR4 != 0)
| timings
#endif
;
PRINTF ("PBR4: %08x POR4: %08x\n", pcmp->pcmc_pbr4, pcmp->pcmc_por4);
pcmp->pcmc_pbr5 = CFG_PCMCIA_PBR5;
pcmp->pcmc_por5 = CFG_PCMCIA_POR5
#if (CFG_PCMCIA_POR5 != 0)
| timings
#endif
;
PRINTF ("PBR5: %08x POR5: %08x\n", pcmp->pcmc_pbr5, pcmp->pcmc_por5);
pcmp->pcmc_pbr6 = CFG_PCMCIA_PBR6;
pcmp->pcmc_por6 = CFG_PCMCIA_POR6
#if (CFG_PCMCIA_POR6 != 0)
| timings
#endif
;
PRINTF ("PBR6: %08x POR6: %08x\n", pcmp->pcmc_pbr6, pcmp->pcmc_por6);
pcmp->pcmc_pbr7 = CFG_PCMCIA_PBR7;
pcmp->pcmc_por7 = CFG_PCMCIA_POR7
#if (CFG_PCMCIA_POR7 != 0)
| timings
#endif
;
PRINTF ("PBR7: %08x POR7: %08x\n", pcmp->pcmc_pbr7, pcmp->pcmc_por7);
}
#endif /* CONFIG_IDE_8xx_DIRECT */
/* ------------------------------------------------------------------------- */
#ifdef __PPC__
static void __inline__
ide_outb(int dev, int port, unsigned char val)
{
PRINTF ("ide_outb (dev= %d, port= %d, val= 0x%02x) : @ 0x%08lx\n",
dev, port, val, (ATA_CURR_BASE(dev)+port));
/* Ensure I/O operations complete */
__asm__ volatile("eieio");
*((uchar *)(ATA_CURR_BASE(dev)+port)) = val;
}
#else /* ! __PPC__ */
static void __inline__
ide_outb(int dev, int port, unsigned char val)
{
outb(val, ATA_CURR_BASE(dev)+port);
}
#endif /* __PPC__ */
#ifdef __PPC__
static unsigned char __inline__
ide_inb(int dev, int port)
{
uchar val;
/* Ensure I/O operations complete */
__asm__ volatile("eieio");
val = *((uchar *)(ATA_CURR_BASE(dev)+port));
PRINTF ("ide_inb (dev= %d, port= %d) : @ 0x%08lx -> 0x%02x\n",
dev, port, (ATA_CURR_BASE(dev)+port), val);
return (val);
}
#else /* ! __PPC__ */
static unsigned char __inline__
ide_inb(int dev, int port)
{
return inb(ATA_CURR_BASE(dev)+port);
}
#endif /* __PPC__ */
#ifdef __PPC__
# ifdef CONFIG_AMIGAONEG3SE
static void
output_data_short(int dev, ulong *sect_buf, int words)
{
ushort *dbuf;
volatile ushort *pbuf;
pbuf = (ushort *)(ATA_CURR_BASE(dev)+ATA_DATA_REG);
dbuf = (ushort *)sect_buf;
while (words--) {
__asm__ volatile ("eieio");
*pbuf = *dbuf++;
__asm__ volatile ("eieio");
}
if (words&1)
*pbuf = 0;
}
# endif /* CONFIG_AMIGAONEG3SE */
#endif /* __PPC_ */
/* We only need to swap data if we are running on a big endian cpu. */
/* But Au1x00 cpu:s already swaps data in big endian mode! */
#if defined(__LITTLE_ENDIAN) || defined(CONFIG_AU1X00)
#define input_swap_data(x,y,z) input_data(x,y,z)
#else
static void
input_swap_data(int dev, ulong *sect_buf, int words)
{
#ifndef CONFIG_HMI10
volatile ushort *pbuf = (ushort *)(ATA_CURR_BASE(dev)+ATA_DATA_REG);
ushort *dbuf = (ushort *)sect_buf;
while (words--) {
*dbuf++ = ld_le16(pbuf);
*dbuf++ = ld_le16(pbuf);
}
#else /* CONFIG_HMI10 */
uchar i;
volatile uchar *pbuf_even = (uchar *)(ATA_CURR_BASE(dev)+ATA_DATA_EVEN);
volatile uchar *pbuf_odd = (uchar *)(ATA_CURR_BASE(dev)+ATA_DATA_ODD);
ushort *dbuf = (ushort *)sect_buf;
while (words--) {
for (i=0; i<2; i++) {
*(((uchar *)(dbuf)) + 1) = *pbuf_even;
*(uchar *)dbuf = *pbuf_odd;
dbuf+=1;
}
}
#endif /* CONFIG_HMI10 */
}
#endif /* __LITTLE_ENDIAN || CONFIG_AU1X00 */
#ifdef __PPC__
static void
output_data(int dev, ulong *sect_buf, int words)
{
#ifndef CONFIG_HMI10
ushort *dbuf;
volatile ushort *pbuf;
pbuf = (ushort *)(ATA_CURR_BASE(dev)+ATA_DATA_REG);
dbuf = (ushort *)sect_buf;
while (words--) {
__asm__ volatile ("eieio");
*pbuf = *dbuf++;
__asm__ volatile ("eieio");
*pbuf = *dbuf++;
}
#else /* CONFIG_HMI10 */
uchar *dbuf;
volatile uchar *pbuf_even;
volatile uchar *pbuf_odd;
pbuf_even = (uchar *)(ATA_CURR_BASE(dev)+ATA_DATA_EVEN);
pbuf_odd = (uchar *)(ATA_CURR_BASE(dev)+ATA_DATA_ODD);
dbuf = (uchar *)sect_buf;
while (words--) {
__asm__ volatile ("eieio");
*pbuf_even = *dbuf++;
__asm__ volatile ("eieio");
*pbuf_odd = *dbuf++;
__asm__ volatile ("eieio");
*pbuf_even = *dbuf++;
__asm__ volatile ("eieio");
*pbuf_odd = *dbuf++;
}
#endif /* CONFIG_HMI10 */
}
#else /* ! __PPC__ */
static void
output_data(int dev, ulong *sect_buf, int words)
{
outsw(ATA_CURR_BASE(dev)+ATA_DATA_REG, sect_buf, words<<1);
}
#endif /* __PPC__ */
#ifdef __PPC__
static void
input_data(int dev, ulong *sect_buf, int words)
{
#ifndef CONFIG_HMI10
ushort *dbuf;
volatile ushort *pbuf;
pbuf = (ushort *)(ATA_CURR_BASE(dev)+ATA_DATA_REG);
dbuf = (ushort *)sect_buf;
while (words--) {
__asm__ volatile ("eieio");
*dbuf++ = *pbuf;
__asm__ volatile ("eieio");
*dbuf++ = *pbuf;
}
#else /* CONFIG_HMI10 */
uchar *dbuf;
volatile uchar *pbuf_even;
volatile uchar *pbuf_odd;
pbuf_even = (uchar *)(ATA_CURR_BASE(dev)+ATA_DATA_EVEN);
pbuf_odd = (uchar *)(ATA_CURR_BASE(dev)+ATA_DATA_ODD);
dbuf = (uchar *)sect_buf;
while (words--) {
__asm__ volatile ("eieio");
*dbuf++ = *pbuf_even;
__asm__ volatile ("eieio");
*dbuf++ = *pbuf_odd;
__asm__ volatile ("eieio");
*dbuf++ = *pbuf_even;
__asm__ volatile ("eieio");
*dbuf++ = *pbuf_odd;
}
#endif /* CONFIG_HMI10 */
}
#else /* ! __PPC__ */
static void
input_data(int dev, ulong *sect_buf, int words)
{
insw(ATA_CURR_BASE(dev)+ATA_DATA_REG, sect_buf, words << 1);
}
#endif /* __PPC__ */
#ifdef CONFIG_AMIGAONEG3SE
static void
input_data_short(int dev, ulong *sect_buf, int words)
{
ushort *dbuf;
volatile ushort *pbuf;
pbuf = (ushort *)(ATA_CURR_BASE(dev)+ATA_DATA_REG);
dbuf = (ushort *)sect_buf;
while (words--) {
__asm__ volatile ("eieio");
*dbuf++ = *pbuf;
__asm__ volatile ("eieio");
}
if (words&1) {
ushort dummy;
dummy = *pbuf;
}
}
#endif
/* -------------------------------------------------------------------------
*/
static void ide_ident (block_dev_desc_t *dev_desc)
{
ulong iobuf[ATA_SECTORWORDS];
unsigned char c;
hd_driveid_t *iop = (hd_driveid_t *)iobuf;
#ifdef CONFIG_AMIGAONEG3SE
int max_bus_scan;
int retries = 0;
char *s;
int do_retry = 0;
#endif
#if 0
int mode, cycle_time;
#endif
int device;
device=dev_desc->dev;
printf (" Device %d: ", device);
#ifdef CONFIG_AMIGAONEG3SE
s = getenv("ide_maxbus");
if (s) {
max_bus_scan = simple_strtol(s, NULL, 10);
} else {
max_bus_scan = CFG_IDE_MAXBUS;
}
if (device >= max_bus_scan*2) {
dev_desc->type=DEV_TYPE_UNKNOWN;
return;
}
#endif
ide_led (DEVICE_LED(device), 1); /* LED on */
/* Select device
*/
ide_outb (device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device));
dev_desc->if_type=IF_TYPE_IDE;
#ifdef CONFIG_ATAPI
#ifdef CONFIG_AMIGAONEG3SE
do_retry = 0;
retries = 0;
/* Warning: This will be tricky to read */
while (retries <= 1) {
#endif /* CONFIG_AMIGAONEG3SE */
/* check signature */
if ((ide_inb(device,ATA_SECT_CNT) == 0x01) &&
(ide_inb(device,ATA_SECT_NUM) == 0x01) &&
(ide_inb(device,ATA_CYL_LOW) == 0x14) &&
(ide_inb(device,ATA_CYL_HIGH) == 0xEB)) {
/* ATAPI Signature found */
dev_desc->if_type=IF_TYPE_ATAPI;
/* Start Ident Command
*/
ide_outb (device, ATA_COMMAND, ATAPI_CMD_IDENT);
/*
* Wait for completion - ATAPI devices need more time
* to become ready
*/
c = ide_wait (device, ATAPI_TIME_OUT);
} else
#endif
{
/* Start Ident Command
*/
ide_outb (device, ATA_COMMAND, ATA_CMD_IDENT);
/* Wait for completion
*/
c = ide_wait (device, IDE_TIME_OUT);
}
ide_led (DEVICE_LED(device), 0); /* LED off */
if (((c & ATA_STAT_DRQ) == 0) ||
((c & (ATA_STAT_FAULT|ATA_STAT_ERR)) != 0) ) {
#ifdef CONFIG_AMIGAONEG3SE
if (retries == 0) {
do_retry = 1;
} else {
return;
}
#else
return;
#endif /* CONFIG_AMIGAONEG3SE */
}
#ifdef CONFIG_AMIGAONEG3SE
s = getenv("ide_doreset");
if (s && strcmp(s, "on") == 0 && 1 == do_retry) {
/* Need to soft reset the device in case it's an ATAPI... */
PRINTF("Retrying...\n");
ide_outb (device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device));
udelay(100000);
ide_outb (device, ATA_COMMAND, 0x08);
udelay (100000); /* 100 ms */
retries++;
} else {
retries = 100;
}
} /* see above - ugly to read */
#endif /* CONFIG_AMIGAONEG3SE */
input_swap_data (device, iobuf, ATA_SECTORWORDS);
ident_cpy (dev_desc->revision, iop->fw_rev, sizeof(dev_desc->revision));
ident_cpy (dev_desc->vendor, iop->model, sizeof(dev_desc->vendor));
ident_cpy (dev_desc->product, iop->serial_no, sizeof(dev_desc->product));
#ifdef __LITTLE_ENDIAN
/*
* firmware revision and model number have Big Endian Byte
* order in Word. Convert both to little endian.
*
* See CF+ and CompactFlash Specification Revision 2.0:
* 6.2.1.6: Identfy Drive, Table 39 for more details
*/
strswab (dev_desc->revision);
strswab (dev_desc->vendor);
#endif /* __LITTLE_ENDIAN */
if ((iop->config & 0x0080)==0x0080)
dev_desc->removable = 1;
else
dev_desc->removable = 0;
#if 0
/*
* Drive PIO mode autoselection
*/
mode = iop->tPIO;
printf ("tPIO = 0x%02x = %d\n",mode, mode);
if (mode > 2) { /* 2 is maximum allowed tPIO value */
mode = 2;
PRINTF ("Override tPIO -> 2\n");
}
if (iop->field_valid & 2) { /* drive implements ATA2? */
PRINTF ("Drive implements ATA2\n");
if (iop->capability & 8) { /* drive supports use_iordy? */
cycle_time = iop->eide_pio_iordy;
} else {
cycle_time = iop->eide_pio;
}
PRINTF ("cycle time = %d\n", cycle_time);
mode = 4;
if (cycle_time > 120) mode = 3; /* 120 ns for PIO mode 4 */
if (cycle_time > 180) mode = 2; /* 180 ns for PIO mode 3 */
if (cycle_time > 240) mode = 1; /* 240 ns for PIO mode 4 */
if (cycle_time > 383) mode = 0; /* 383 ns for PIO mode 4 */
}
printf ("PIO mode to use: PIO %d\n", mode);
#endif /* 0 */
#ifdef CONFIG_ATAPI
if (dev_desc->if_type==IF_TYPE_ATAPI) {
atapi_inquiry(dev_desc);
return;
}
#endif /* CONFIG_ATAPI */
#ifdef __BIG_ENDIAN
/* swap shorts */
dev_desc->lba = (iop->lba_capacity << 16) | (iop->lba_capacity >> 16);
#else /* ! __BIG_ENDIAN */
/*
* do not swap shorts on little endian
*
* See CF+ and CompactFlash Specification Revision 2.0:
* 6.2.1.6: Identfy Drive, Table 39, Word Address 57-58 for details.
*/
dev_desc->lba = iop->lba_capacity;
#endif /* __BIG_ENDIAN */
#if CONFIG_LBA48
if (iop->command_set_2 & 0x0400) { /* LBA 48 support */
dev_desc->lba48support = 1;
dev_desc->lba48 = (unsigned long long)iop->lba48_capacity[0] |
((unsigned long long)iop->lba48_capacity[1] << 16) |
((unsigned long long)iop->lba48_capacity[2] << 32) |
((unsigned long long)iop->lba48_capacity[3] << 48);
} else {
dev_desc->lba48support = 0;
dev_desc->lba48 = 0;
}
#endif /* CONFIG_LBA48 */
/* assuming HD */
dev_desc->type=DEV_TYPE_HARDDISK;
dev_desc->blksz=ATA_BLOCKSIZE;
dev_desc->lun=0; /* just to fill something in... */
#if 0 /* only used to test the powersaving mode,
* if enabled, the drive goes after 5 sec
* in standby mode */
ide_outb (device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device));
c = ide_wait (device, IDE_TIME_OUT);
ide_outb (device, ATA_SECT_CNT, 1);
ide_outb (device, ATA_LBA_LOW, 0);
ide_outb (device, ATA_LBA_MID, 0);
ide_outb (device, ATA_LBA_HIGH, 0);
ide_outb (device, ATA_DEV_HD, ATA_LBA |
ATA_DEVICE(device));
ide_outb (device, ATA_COMMAND, 0xe3);
udelay (50);
c = ide_wait (device, IDE_TIME_OUT); /* can't take over 500 ms */
#endif
}
/* ------------------------------------------------------------------------- */
ulong ide_read (int device, lbaint_t blknr, ulong blkcnt, ulong *buffer)
{
ulong n = 0;
unsigned char c;
unsigned char pwrsave=0; /* power save */
#if CONFIG_LBA48
unsigned char lba48 = 0;
if (blknr & 0x0000fffff0000000) {
/* more than 28 bits used, use 48bit mode */
lba48 = 1;
}
#endif
PRINTF ("ide_read dev %d start %qX, blocks %lX buffer at %lX\n",
device, blknr, blkcnt, (ulong)buffer);
ide_led (DEVICE_LED(device), 1); /* LED on */
/* Select device
*/
ide_outb (device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device));
c = ide_wait (device, IDE_TIME_OUT);
if (c & ATA_STAT_BUSY) {
printf ("IDE read: device %d not ready\n", device);
goto IDE_READ_E;
}
/* first check if the drive is in Powersaving mode, if yes,
* increase the timeout value */
ide_outb (device, ATA_COMMAND, ATA_CMD_CHK_PWR);
udelay (50);
c = ide_wait (device, IDE_TIME_OUT); /* can't take over 500 ms */
if (c & ATA_STAT_BUSY) {
printf ("IDE read: device %d not ready\n", device);
goto IDE_READ_E;
}
if ((c & ATA_STAT_ERR) == ATA_STAT_ERR) {
printf ("No Powersaving mode %X\n", c);
} else {
c = ide_inb(device,ATA_SECT_CNT);
PRINTF("Powersaving %02X\n",c);
if(c==0)
pwrsave=1;
}
while (blkcnt-- > 0) {
c = ide_wait (device, IDE_TIME_OUT);
if (c & ATA_STAT_BUSY) {
printf ("IDE read: device %d not ready\n", device);
break;
}
#if CONFIG_LBA48
if (lba48) {
/* write high bits */
ide_outb (device, ATA_SECT_CNT, 0);
ide_outb (device, ATA_LBA_LOW, (blknr >> 24) & 0xFF);
ide_outb (device, ATA_LBA_MID, (blknr >> 32) & 0xFF);
ide_outb (device, ATA_LBA_HIGH, (blknr >> 40) & 0xFF);
}
#endif
ide_outb (device, ATA_SECT_CNT, 1);
ide_outb (device, ATA_LBA_LOW, (blknr >> 0) & 0xFF);
ide_outb (device, ATA_LBA_MID, (blknr >> 8) & 0xFF);
ide_outb (device, ATA_LBA_HIGH, (blknr >> 16) & 0xFF);
#if CONFIG_LBA48
if (lba48) {
ide_outb (device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device) );
ide_outb (device, ATA_COMMAND, ATA_CMD_READ_EXT);
} else
#endif
{
ide_outb (device, ATA_DEV_HD, ATA_LBA |
ATA_DEVICE(device) |
((blknr >> 24) & 0xF) );
ide_outb (device, ATA_COMMAND, ATA_CMD_READ);
}
udelay (50);
if(pwrsave) {
c = ide_wait (device, IDE_SPIN_UP_TIME_OUT); /* may take up to 4 sec */
pwrsave=0;
} else {
c = ide_wait (device, IDE_TIME_OUT); /* can't take over 500 ms */
}
if ((c&(ATA_STAT_DRQ|ATA_STAT_BUSY|ATA_STAT_ERR)) != ATA_STAT_DRQ) {
#if CFG_64BIT_LBA && CFG_64BIT_VSPRINTF
printf ("Error (no IRQ) dev %d blk %qd: status 0x%02x\n",
device, blknr, c);
#else
printf ("Error (no IRQ) dev %d blk %ld: status 0x%02x\n",
device, (ulong)blknr, c);
#endif
break;
}
input_data (device, buffer, ATA_SECTORWORDS);
(void) ide_inb (device, ATA_STATUS); /* clear IRQ */
++n;
++blknr;
buffer += ATA_SECTORWORDS;
}
IDE_READ_E:
ide_led (DEVICE_LED(device), 0); /* LED off */
return (n);
}
/* ------------------------------------------------------------------------- */
ulong ide_write (int device, lbaint_t blknr, ulong blkcnt, ulong *buffer)
{
ulong n = 0;
unsigned char c;
#if CONFIG_LBA48
unsigned char lba48 = 0;
if (blknr & 0x0000fffff0000000) {
/* more than 28 bits used, use 48bit mode */
lba48 = 1;
}
#endif
ide_led (DEVICE_LED(device), 1); /* LED on */
/* Select device
*/
ide_outb (device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device));
while (blkcnt-- > 0) {
c = ide_wait (device, IDE_TIME_OUT);
if (c & ATA_STAT_BUSY) {
printf ("IDE read: device %d not ready\n", device);
goto WR_OUT;
}
#if CONFIG_LBA48
if (lba48) {
/* write high bits */
ide_outb (device, ATA_SECT_CNT, 0);
ide_outb (device, ATA_LBA_LOW, (blknr >> 24) & 0xFF);
ide_outb (device, ATA_LBA_MID, (blknr >> 32) & 0xFF);
ide_outb (device, ATA_LBA_HIGH, (blknr >> 40) & 0xFF);
}
#endif
ide_outb (device, ATA_SECT_CNT, 1);
ide_outb (device, ATA_LBA_LOW, (blknr >> 0) & 0xFF);
ide_outb (device, ATA_LBA_MID, (blknr >> 8) & 0xFF);
ide_outb (device, ATA_LBA_HIGH, (blknr >> 16) & 0xFF);
#if CONFIG_LBA48
if (lba48) {
ide_outb (device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device) );
ide_outb (device, ATA_COMMAND, ATA_CMD_WRITE_EXT);
} else
#endif
{
ide_outb (device, ATA_DEV_HD, ATA_LBA |
ATA_DEVICE(device) |
((blknr >> 24) & 0xF) );
ide_outb (device, ATA_COMMAND, ATA_CMD_WRITE);
}
udelay (50);
c = ide_wait (device, IDE_TIME_OUT); /* can't take over 500 ms */
if ((c&(ATA_STAT_DRQ|ATA_STAT_BUSY|ATA_STAT_ERR)) != ATA_STAT_DRQ) {
#if CFG_64BIT_LBA && CFG_64BIT_VSPRINTF
printf ("Error (no IRQ) dev %d blk %qd: status 0x%02x\n",
device, blknr, c);
#else
printf ("Error (no IRQ) dev %d blk %ld: status 0x%02x\n",
device, (ulong)blknr, c);
#endif
goto WR_OUT;
}
output_data (device, buffer, ATA_SECTORWORDS);
c = ide_inb (device, ATA_STATUS); /* clear IRQ */
++n;
++blknr;
buffer += ATA_SECTORWORDS;
}
WR_OUT:
ide_led (DEVICE_LED(device), 0); /* LED off */
return (n);
}
/* ------------------------------------------------------------------------- */
/*
* copy src to dest, skipping leading and trailing blanks and null
* terminate the string
*/
static void ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len)
{
int start,end;
start=0;
while (start<len) {
if (src[start]!=' ')
break;
start++;
}
end=len-1;
while (end>start) {
if (src[end]!=' ')
break;
end--;
}
for ( ; start<=end; start++) {
*dest++=src[start];
}
*dest='\0';
}
/* ------------------------------------------------------------------------- */
/*
* Wait until Busy bit is off, or timeout (in ms)
* Return last status
*/
static uchar ide_wait (int dev, ulong t)
{
ulong delay = 10 * t; /* poll every 100 us */
uchar c;
while ((c = ide_inb(dev, ATA_STATUS)) & ATA_STAT_BUSY) {
udelay (100);
if (delay-- == 0) {
break;
}
}
return (c);
}
/* ------------------------------------------------------------------------- */
#ifdef CONFIG_IDE_RESET
extern void ide_set_reset(int idereset);
static void ide_reset (void)
{
#if defined(CFG_PB_12V_ENABLE) || defined(CFG_PB_IDE_MOTOR)
volatile immap_t *immr = (immap_t *)CFG_IMMR;
#endif
int i;
curr_device = -1;
for (i=0; i<CFG_IDE_MAXBUS; ++i)
ide_bus_ok[i] = 0;
for (i=0; i<CFG_IDE_MAXDEVICE; ++i)
ide_dev_desc[i].type = DEV_TYPE_UNKNOWN;
ide_set_reset (1); /* assert reset */
WATCHDOG_RESET();
#ifdef CFG_PB_12V_ENABLE
immr->im_cpm.cp_pbdat &= ~(CFG_PB_12V_ENABLE); /* 12V Enable output OFF */
immr->im_cpm.cp_pbpar &= ~(CFG_PB_12V_ENABLE);
immr->im_cpm.cp_pbodr &= ~(CFG_PB_12V_ENABLE);
immr->im_cpm.cp_pbdir |= CFG_PB_12V_ENABLE;
/* wait 500 ms for the voltage to stabilize
*/
for (i=0; i<500; ++i) {
udelay (1000);
}
immr->im_cpm.cp_pbdat |= CFG_PB_12V_ENABLE; /* 12V Enable output ON */
#endif /* CFG_PB_12V_ENABLE */
#ifdef CFG_PB_IDE_MOTOR
/* configure IDE Motor voltage monitor pin as input */
immr->im_cpm.cp_pbpar &= ~(CFG_PB_IDE_MOTOR);
immr->im_cpm.cp_pbodr &= ~(CFG_PB_IDE_MOTOR);
immr->im_cpm.cp_pbdir &= ~(CFG_PB_IDE_MOTOR);
/* wait up to 1 s for the motor voltage to stabilize
*/
for (i=0; i<1000; ++i) {
if ((immr->im_cpm.cp_pbdat & CFG_PB_IDE_MOTOR) != 0) {
break;
}
udelay (1000);
}
if (i == 1000) { /* Timeout */
printf ("\nWarning: 5V for IDE Motor missing\n");
# ifdef CONFIG_STATUS_LED
# ifdef STATUS_LED_YELLOW
status_led_set (STATUS_LED_YELLOW, STATUS_LED_ON );
# endif
# ifdef STATUS_LED_GREEN
status_led_set (STATUS_LED_GREEN, STATUS_LED_OFF);
# endif
# endif /* CONFIG_STATUS_LED */
}
#endif /* CFG_PB_IDE_MOTOR */
WATCHDOG_RESET();
/* de-assert RESET signal */
ide_set_reset(0);
/* wait 250 ms */
for (i=0; i<250; ++i) {
udelay (1000);
}
}
#endif /* CONFIG_IDE_RESET */
/* ------------------------------------------------------------------------- */
#if defined(CONFIG_IDE_LED) && !defined(CONFIG_AMIGAONEG3SE) && !defined(CONFIG_KUP4K) && !defined(CONFIG_HMI10)
static uchar led_buffer = 0; /* Buffer for current LED status */
static void ide_led (uchar led, uchar status)
{
uchar *led_port = LED_PORT;
if (status) { /* switch LED on */
led_buffer |= led;
} else { /* switch LED off */
led_buffer &= ~led;
}
*led_port = led_buffer;
}
#endif /* CONFIG_IDE_LED */
/* ------------------------------------------------------------------------- */
#ifdef CONFIG_ATAPI
/****************************************************************************
* ATAPI Support
*/
#undef ATAPI_DEBUG
#ifdef ATAPI_DEBUG
#define AT_PRINTF(fmt,args...) printf (fmt ,##args)
#else
#define AT_PRINTF(fmt,args...)
#endif
#ifdef __PPC__
/* since ATAPI may use commands with not 4 bytes alligned length
* we have our own transfer functions, 2 bytes alligned */
static void
output_data_shorts(int dev, ushort *sect_buf, int shorts)
{
#ifndef CONFIG_HMI10
ushort *dbuf;
volatile ushort *pbuf;
pbuf = (ushort *)(ATA_CURR_BASE(dev)+ATA_DATA_REG);
dbuf = (ushort *)sect_buf;
while (shorts--) {
__asm__ volatile ("eieio");
*pbuf = *dbuf++;
}
#else /* CONFIG_HMI10 */
uchar *dbuf;
volatile uchar *pbuf_even;
volatile uchar *pbuf_odd;
pbuf_even = (uchar *)(ATA_CURR_BASE(dev)+ATA_DATA_EVEN);
pbuf_odd = (uchar *)(ATA_CURR_BASE(dev)+ATA_DATA_ODD);
while (shorts--) {
__asm__ volatile ("eieio");
*pbuf_even = *dbuf++;
__asm__ volatile ("eieio");
*pbuf_odd = *dbuf++;
}
#endif /* CONFIG_HMI10 */
}
static void
input_data_shorts(int dev, ushort *sect_buf, int shorts)
{
#ifndef CONFIG_HMI10
ushort *dbuf;
volatile ushort *pbuf;
pbuf = (ushort *)(ATA_CURR_BASE(dev)+ATA_DATA_REG);
dbuf = (ushort *)sect_buf;
while (shorts--) {
__asm__ volatile ("eieio");
*dbuf++ = *pbuf;
}
#else /* CONFIG_HMI10 */
uchar *dbuf;
volatile uchar *pbuf_even;
volatile uchar *pbuf_odd;
pbuf_even = (uchar *)(ATA_CURR_BASE(dev)+ATA_DATA_EVEN);
pbuf_odd = (uchar *)(ATA_CURR_BASE(dev)+ATA_DATA_ODD);
while (shorts--) {
__asm__ volatile ("eieio");
*dbuf++ = *pbuf_even;
__asm__ volatile ("eieio");
*dbuf++ = *pbuf_odd;
}
#endif /* CONFIG_HMI10 */
}
#else /* ! __PPC__ */
static void
output_data_shorts(int dev, ushort *sect_buf, int shorts)
{
outsw(ATA_CURR_BASE(dev)+ATA_DATA_REG, sect_buf, shorts);
}
static void
input_data_shorts(int dev, ushort *sect_buf, int shorts)
{
insw(ATA_CURR_BASE(dev)+ATA_DATA_REG, sect_buf, shorts);
}
#endif /* __PPC__ */
/*
* Wait until (Status & mask) == res, or timeout (in ms)
* Return last status
* This is used since some ATAPI CD ROMs clears their Busy Bit first
* and then they set their DRQ Bit
*/
static uchar atapi_wait_mask (int dev, ulong t,uchar mask, uchar res)
{
ulong delay = 10 * t; /* poll every 100 us */
uchar c;
c = ide_inb(dev,ATA_DEV_CTL); /* prevents to read the status before valid */
while (((c = ide_inb(dev, ATA_STATUS)) & mask) != res) {
/* break if error occurs (doesn't make sense to wait more) */
if((c & ATA_STAT_ERR)==ATA_STAT_ERR)
break;
udelay (100);
if (delay-- == 0) {
break;
}
}
return (c);
}
/*
* issue an atapi command
*/
unsigned char atapi_issue(int device,unsigned char* ccb,int ccblen, unsigned char * buffer,int buflen)
{
unsigned char c,err,mask,res;
int n;
ide_led (DEVICE_LED(device), 1); /* LED on */
/* Select device
*/
mask = ATA_STAT_BUSY|ATA_STAT_DRQ;
res = 0;
#ifdef CONFIG_AMIGAONEG3SE
# warning THF: Removed LBA mode ???
#endif
ide_outb (device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device));
c = atapi_wait_mask(device,ATAPI_TIME_OUT,mask,res);
if ((c & mask) != res) {
printf ("ATAPI_ISSUE: device %d not ready status %X\n", device,c);
err=0xFF;
goto AI_OUT;
}
/* write taskfile */
ide_outb (device, ATA_ERROR_REG, 0); /* no DMA, no overlaped */
ide_outb (device, ATA_SECT_CNT, 0);
ide_outb (device, ATA_SECT_NUM, 0);
ide_outb (device, ATA_CYL_LOW, (unsigned char)(buflen & 0xFF));
ide_outb (device, ATA_CYL_HIGH, (unsigned char)((buflen>>8) & 0xFF));
#ifdef CONFIG_AMIGAONEG3SE
# warning THF: Removed LBA mode ???
#endif
ide_outb (device, ATA_DEV_HD, ATA_LBA | ATA_DEVICE(device));
ide_outb (device, ATA_COMMAND, ATAPI_CMD_PACKET);
udelay (50);
mask = ATA_STAT_DRQ|ATA_STAT_BUSY|ATA_STAT_ERR;
res = ATA_STAT_DRQ;
c = atapi_wait_mask(device,ATAPI_TIME_OUT,mask,res);
if ((c & mask) != res) { /* DRQ must be 1, BSY 0 */
printf ("ATTAPI_ISSUE: Error (no IRQ) before sending ccb dev %d status 0x%02x\n",device,c);
err=0xFF;
goto AI_OUT;
}
output_data_shorts (device, (unsigned short *)ccb,ccblen/2); /* write command block */
/* ATAPI Command written wait for completition */
udelay (5000); /* device must set bsy */
mask = ATA_STAT_DRQ|ATA_STAT_BUSY|ATA_STAT_ERR;
/* if no data wait for DRQ = 0 BSY = 0
* if data wait for DRQ = 1 BSY = 0 */
res=0;
if(buflen)
res = ATA_STAT_DRQ;
c = atapi_wait_mask(device,ATAPI_TIME_OUT,mask,res);
if ((c & mask) != res ) {
if (c & ATA_STAT_ERR) {
err=(ide_inb(device,ATA_ERROR_REG))>>4;
AT_PRINTF("atapi_issue 1 returned sense key %X status %02X\n",err,c);
} else {
printf ("ATTAPI_ISSUE: (no DRQ) after sending ccb (%x) status 0x%02x\n", ccb[0],c);
err=0xFF;
}
goto AI_OUT;
}
n=ide_inb(device, ATA_CYL_HIGH);
n<<=8;
n+=ide_inb(device, ATA_CYL_LOW);
if(n>buflen) {
printf("ERROR, transfer bytes %d requested only %d\n",n,buflen);
err=0xff;
goto AI_OUT;
}
if((n==0)&&(buflen<0)) {
printf("ERROR, transfer bytes %d requested %d\n",n,buflen);
err=0xff;
goto AI_OUT;
}
if(n!=buflen) {
AT_PRINTF("WARNING, transfer bytes %d not equal with requested %d\n",n,buflen);
}
if(n!=0) { /* data transfer */
AT_PRINTF("ATAPI_ISSUE: %d Bytes to transfer\n",n);
/* we transfer shorts */
n>>=1;
/* ok now decide if it is an in or output */
if ((ide_inb(device, ATA_SECT_CNT)&0x02)==0) {
AT_PRINTF("Write to device\n");
output_data_shorts(device,(unsigned short *)buffer,n);
} else {
AT_PRINTF("Read from device @ %p shorts %d\n",buffer,n);
input_data_shorts(device,(unsigned short *)buffer,n);
}
}
udelay(5000); /* seems that some CD ROMs need this... */
mask = ATA_STAT_BUSY|ATA_STAT_ERR;
res=0;
c = atapi_wait_mask(device,ATAPI_TIME_OUT,mask,res);
if ((c & ATA_STAT_ERR) == ATA_STAT_ERR) {
err=(ide_inb(device,ATA_ERROR_REG) >> 4);
AT_PRINTF("atapi_issue 2 returned sense key %X status %X\n",err,c);
} else {
err = 0;
}
AI_OUT:
ide_led (DEVICE_LED(device), 0); /* LED off */
return (err);
}
/*
* sending the command to atapi_issue. If an status other than good
* returns, an request_sense will be issued
*/
#define ATAPI_DRIVE_NOT_READY 100
#define ATAPI_UNIT_ATTN 10
unsigned char atapi_issue_autoreq (int device,
unsigned char* ccb,
int ccblen,
unsigned char *buffer,
int buflen)
{
unsigned char sense_data[18],sense_ccb[12];
unsigned char res,key,asc,ascq;
int notready,unitattn;
#ifdef CONFIG_AMIGAONEG3SE
char *s;
unsigned int timeout, retrycnt;
s = getenv("ide_cd_timeout");
timeout = s ? (simple_strtol(s, NULL, 10)*1000000)/5 : 0;
retrycnt = 0;
#endif
unitattn=ATAPI_UNIT_ATTN;
notready=ATAPI_DRIVE_NOT_READY;
retry:
res= atapi_issue(device,ccb,ccblen,buffer,buflen);
if (res==0)
return (0); /* Ok */
if (res==0xFF)
return (0xFF); /* error */
AT_PRINTF("(auto_req)atapi_issue returned sense key %X\n",res);
memset(sense_ccb,0,sizeof(sense_ccb));
memset(sense_data,0,sizeof(sense_data));
sense_ccb[0]=ATAPI_CMD_REQ_SENSE;
sense_ccb[4]=18; /* allocation Length */
res=atapi_issue(device,sense_ccb,12,sense_data,18);
key=(sense_data[2]&0xF);
asc=(sense_data[12]);
ascq=(sense_data[13]);
AT_PRINTF("ATAPI_CMD_REQ_SENSE returned %x\n",res);
AT_PRINTF(" Sense page: %02X key %02X ASC %02X ASCQ %02X\n",
sense_data[0],
key,
asc,
ascq);
if((key==0))
return 0; /* ok device ready */
if((key==6)|| (asc==0x29) || (asc==0x28)) { /* Unit Attention */
if(unitattn-->0) {
udelay(200*1000);
goto retry;
}
printf("Unit Attention, tried %d\n",ATAPI_UNIT_ATTN);
goto error;
}
if((asc==0x4) && (ascq==0x1)) { /* not ready, but will be ready soon */
if (notready-->0) {
udelay(200*1000);
goto retry;
}
printf("Drive not ready, tried %d times\n",ATAPI_DRIVE_NOT_READY);
goto error;
}
if(asc==0x3a) {
AT_PRINTF("Media not present\n");
goto error;
}
#ifdef CONFIG_AMIGAONEG3SE
if ((sense_data[2]&0xF)==0x0B) {
AT_PRINTF("ABORTED COMMAND...retry\n");
if (retrycnt++ < 4)
goto retry;
return (0xFF);
}
if ((sense_data[2]&0xf) == 0x02 &&
sense_data[12] == 0x04 &&
sense_data[13] == 0x01 ) {
AT_PRINTF("Waiting for unit to become active\n");
udelay(timeout);
if (retrycnt++ < 4)
goto retry;
return 0xFF;
}
#endif /* CONFIG_AMIGAONEG3SE */
printf ("ERROR: Unknown Sense key %02X ASC %02X ASCQ %02X\n",key,asc,ascq);
error:
AT_PRINTF ("ERROR Sense key %02X ASC %02X ASCQ %02X\n",key,asc,ascq);
return (0xFF);
}
static void atapi_inquiry(block_dev_desc_t * dev_desc)
{
unsigned char ccb[12]; /* Command descriptor block */
unsigned char iobuf[64]; /* temp buf */
unsigned char c;
int device;
device=dev_desc->dev;
dev_desc->type=DEV_TYPE_UNKNOWN; /* not yet valid */
dev_desc->block_read=atapi_read;
memset(ccb,0,sizeof(ccb));
memset(iobuf,0,sizeof(iobuf));
ccb[0]=ATAPI_CMD_INQUIRY;
ccb[4]=40; /* allocation Legnth */
c=atapi_issue_autoreq(device,ccb,12,(unsigned char *)iobuf,40);
AT_PRINTF("ATAPI_CMD_INQUIRY returned %x\n",c);
if (c!=0)
return;
/* copy device ident strings */
ident_cpy(dev_desc->vendor,&iobuf[8],8);
ident_cpy(dev_desc->product,&iobuf[16],16);
ident_cpy(dev_desc->revision,&iobuf[32],5);
dev_desc->lun=0;
dev_desc->lba=0;
dev_desc->blksz=0;
dev_desc->type=iobuf[0] & 0x1f;
if ((iobuf[1]&0x80)==0x80)
dev_desc->removable = 1;
else
dev_desc->removable = 0;
memset(ccb,0,sizeof(ccb));
memset(iobuf,0,sizeof(iobuf));
ccb[0]=ATAPI_CMD_START_STOP;
ccb[4]=0x03; /* start */
c=atapi_issue_autoreq(device,ccb,12,(unsigned char *)iobuf,0);
AT_PRINTF("ATAPI_CMD_START_STOP returned %x\n",c);
if (c!=0)
return;
memset(ccb,0,sizeof(ccb));
memset(iobuf,0,sizeof(iobuf));
c=atapi_issue_autoreq(device,ccb,12,(unsigned char *)iobuf,0);
AT_PRINTF("ATAPI_CMD_UNIT_TEST_READY returned %x\n",c);
if (c!=0)
return;
memset(ccb,0,sizeof(ccb));
memset(iobuf,0,sizeof(iobuf));
ccb[0]=ATAPI_CMD_READ_CAP;
c=atapi_issue_autoreq(device,ccb,12,(unsigned char *)iobuf,8);
AT_PRINTF("ATAPI_CMD_READ_CAP returned %x\n",c);
if (c!=0)
return;
AT_PRINTF("Read Cap: LBA %02X%02X%02X%02X blksize %02X%02X%02X%02X\n",
iobuf[0],iobuf[1],iobuf[2],iobuf[3],
iobuf[4],iobuf[5],iobuf[6],iobuf[7]);
dev_desc->lba =((unsigned long)iobuf[0]<<24) +
((unsigned long)iobuf[1]<<16) +
((unsigned long)iobuf[2]<< 8) +
((unsigned long)iobuf[3]);
dev_desc->blksz=((unsigned long)iobuf[4]<<24) +
((unsigned long)iobuf[5]<<16) +
((unsigned long)iobuf[6]<< 8) +
((unsigned long)iobuf[7]);
dev_desc->lba48 = 0; /* ATAPI devices cannot use 48bit addressing (ATA/ATAPI v7) */
return;
}
/*
* atapi_read:
* we transfer only one block per command, since the multiple DRQ per
* command is not yet implemented
*/
#define ATAPI_READ_MAX_BYTES 2048 /* we read max 2kbytes */
#define ATAPI_READ_BLOCK_SIZE 2048 /* assuming CD part */
#define ATAPI_READ_MAX_BLOCK ATAPI_READ_MAX_BYTES/ATAPI_READ_BLOCK_SIZE /* max blocks */
ulong atapi_read (int device, lbaint_t blknr, ulong blkcnt, ulong *buffer)
{
ulong n = 0;
unsigned char ccb[12]; /* Command descriptor block */
ulong cnt;
AT_PRINTF("atapi_read dev %d start %lX, blocks %lX buffer at %lX\n",
device, blknr, blkcnt, (ulong)buffer);
do {
if (blkcnt>ATAPI_READ_MAX_BLOCK) {
cnt=ATAPI_READ_MAX_BLOCK;
} else {
cnt=blkcnt;
}
ccb[0]=ATAPI_CMD_READ_12;
ccb[1]=0; /* reserved */
ccb[2]=(unsigned char) (blknr>>24) & 0xFF; /* MSB Block */
ccb[3]=(unsigned char) (blknr>>16) & 0xFF; /* */
ccb[4]=(unsigned char) (blknr>> 8) & 0xFF;
ccb[5]=(unsigned char) blknr & 0xFF; /* LSB Block */
ccb[6]=(unsigned char) (cnt >>24) & 0xFF; /* MSB Block count */
ccb[7]=(unsigned char) (cnt >>16) & 0xFF;
ccb[8]=(unsigned char) (cnt >> 8) & 0xFF;
ccb[9]=(unsigned char) cnt & 0xFF; /* LSB Block */
ccb[10]=0; /* reserved */
ccb[11]=0; /* reserved */
if (atapi_issue_autoreq(device,ccb,12,
(unsigned char *)buffer,
cnt*ATAPI_READ_BLOCK_SIZE) == 0xFF) {
return (n);
}
n+=cnt;
blkcnt-=cnt;
blknr+=cnt;
buffer+=cnt*(ATAPI_READ_BLOCK_SIZE/4); /* ulong blocksize in ulong */
} while (blkcnt > 0);
return (n);
}
/* ------------------------------------------------------------------------- */
#endif /* CONFIG_ATAPI */
U_BOOT_CMD(
ide, 5, 1, do_ide,
"ide - IDE sub-system\n",
"reset - reset IDE controller\n"
"ide info - show available IDE devices\n"
"ide device [dev] - show or set current device\n"
"ide part [dev] - print partition table of one or all IDE devices\n"
"ide read addr blk# cnt\n"
"ide write addr blk# cnt - read/write `cnt'"
" blocks starting at block `blk#'\n"
" to/from memory address `addr'\n"
);
U_BOOT_CMD(
diskboot, 3, 1, do_diskboot,
"diskboot- boot from IDE device\n",
"loadAddr dev:part\n"
);
#endif /* CONFIG_COMMANDS & CFG_CMD_IDE */
Reference in a new issue View git blame Copy permalink