u-boot/board/synopsys/axs101/axs101.c
Alexey Brodkin fb2dea60e8 board: axs10x switch serial port and Ethernet to driver model
With this change Synopsys DesignWare SDP board is switched to driver
model for both serial port (serial_dw) and Ethernet (Designware GMAC).

This simplifies include/configs/axs101.h and allows for reuse of Linux's
Device Tree description.

For simplicity Linux's .dts files are not blindly copied but only very
few extracts of them are really used (those that are supported in U-Boot
at the moment).

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-11-18 00:39:22 +03:00

76 lines
1.6 KiB
C

/*
* Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <dwmmc.h>
#include <malloc.h>
#include "axs10x.h"
DECLARE_GLOBAL_DATA_PTR;
int board_mmc_init(bd_t *bis)
{
struct dwmci_host *host = NULL;
host = malloc(sizeof(struct dwmci_host));
if (!host) {
printf("dwmci_host malloc fail!\n");
return 1;
}
memset(host, 0, sizeof(struct dwmci_host));
host->name = "Synopsys Mobile storage";
host->ioaddr = (void *)ARC_DWMMC_BASE;
host->buswidth = 4;
host->dev_index = 0;
host->bus_hz = 50000000;
add_dwmci(host, host->bus_hz / 2, 400000);
return 0;
}
#define AXS_MB_CREG 0xE0011000
int board_early_init_f(void)
{
if (readl((void __iomem *)AXS_MB_CREG + 0x234) & (1 << 28))
gd->board_type = AXS_MB_V3;
else
gd->board_type = AXS_MB_V2;
return 0;
}
#ifdef CONFIG_ISA_ARCV2
#define RESET_VECTOR_ADDR 0x0
void smp_set_core_boot_addr(unsigned long addr, int corenr)
{
/* All cores have reset vector pointing to 0 */
writel(addr, (void __iomem *)RESET_VECTOR_ADDR);
/* Make sure other cores see written value in memory */
flush_dcache_range(RESET_VECTOR_ADDR, RESET_VECTOR_ADDR + sizeof(int));
}
void smp_kick_all_cpus(void)
{
/* CPU start CREG */
#define AXC003_CREG_CPU_START 0xF0001400
/* Bits positions in CPU start CREG */
#define BITS_START 0
#define BITS_POLARITY 8
#define BITS_CORE_SEL 9
#define BITS_MULTICORE 12
#define CMD (1 << BITS_MULTICORE) | (1 << BITS_CORE_SEL) | \
(1 << BITS_POLARITY) | (1 << BITS_START)
writel(CMD, (void __iomem *)AXC003_CREG_CPU_START);
}
#endif