mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-23 03:23:47 +00:00
35b65dd8ef
Historically, the reset_cpu() function had an `addr` parameter which was
meant to pass in an address of the reset vector location, where the CPU
should reset to. This feature is no longer used anywhere in U-Boot as
all reset_cpu() implementations now ignore the passed value. Generic
code has been added which always calls reset_cpu() with `0` which means
this feature can no longer be used easily anyway.
Over time, many implementations seem to have "misunderstood" the
existence of this parameter as a way to customize/parameterize the reset
(e.g. COLD vs WARM resets). As this is not properly supported, the
code will almost always not do what it is intended to (because all
call-sites just call reset_cpu() with 0).
To avoid confusion and to clean up the codebase from unused left-overs
of the past, remove the `addr` parameter entirely. Code which intends
to support different kinds of resets should be rewritten as a sysreset
driver instead.
This transformation was done with the following coccinelle patch:
@@
expression argvalue;
@@
- reset_cpu(argvalue)
+ reset_cpu()
@@
identifier argname;
type argtype;
@@
- reset_cpu(argtype argname)
+ reset_cpu(void)
{ ... }
Signed-off-by: Harald Seiler <hws@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
116 lines
3 KiB
C
116 lines
3 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* SPL specific code for Compulab CM-T335 board
|
|
*
|
|
* Board functions for Compulab CM-T335 board
|
|
*
|
|
* Copyright (C) 2013, Compulab Ltd - http://compulab.co.il/
|
|
*
|
|
* Author: Ilya Ledvich <ilya@compulab.co.il>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <cpu_func.h>
|
|
#include <errno.h>
|
|
#include <init.h>
|
|
#include <log.h>
|
|
|
|
#include <asm/arch/ddr_defs.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/clocks_am33xx.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/arch/hardware_am33xx.h>
|
|
#include <linux/sizes.h>
|
|
|
|
const struct ctrl_ioregs ioregs = {
|
|
.cm0ioctl = MT41J128MJT125_IOCTRL_VALUE,
|
|
.cm1ioctl = MT41J128MJT125_IOCTRL_VALUE,
|
|
.cm2ioctl = MT41J128MJT125_IOCTRL_VALUE,
|
|
.dt0ioctl = MT41J128MJT125_IOCTRL_VALUE,
|
|
.dt1ioctl = MT41J128MJT125_IOCTRL_VALUE,
|
|
};
|
|
|
|
static const struct ddr_data ddr3_data = {
|
|
.datardsratio0 = MT41J128MJT125_RD_DQS,
|
|
.datawdsratio0 = MT41J128MJT125_WR_DQS,
|
|
.datafwsratio0 = MT41J128MJT125_PHY_FIFO_WE,
|
|
.datawrsratio0 = MT41J128MJT125_PHY_WR_DATA,
|
|
};
|
|
|
|
static const struct cmd_control ddr3_cmd_ctrl_data = {
|
|
.cmd0csratio = MT41J128MJT125_RATIO,
|
|
.cmd0iclkout = MT41J128MJT125_INVERT_CLKOUT,
|
|
|
|
.cmd1csratio = MT41J128MJT125_RATIO,
|
|
.cmd1iclkout = MT41J128MJT125_INVERT_CLKOUT,
|
|
|
|
.cmd2csratio = MT41J128MJT125_RATIO,
|
|
.cmd2iclkout = MT41J128MJT125_INVERT_CLKOUT,
|
|
};
|
|
|
|
static struct emif_regs ddr3_emif_reg_data = {
|
|
.sdram_config = MT41J128MJT125_EMIF_SDCFG,
|
|
.ref_ctrl = MT41J128MJT125_EMIF_SDREF,
|
|
.sdram_tim1 = MT41J128MJT125_EMIF_TIM1,
|
|
.sdram_tim2 = MT41J128MJT125_EMIF_TIM2,
|
|
.sdram_tim3 = MT41J128MJT125_EMIF_TIM3,
|
|
.zq_config = MT41J128MJT125_ZQ_CFG,
|
|
.emif_ddr_phy_ctlr_1 = MT41J128MJT125_EMIF_READ_LATENCY |
|
|
PHY_EN_DYN_PWRDN,
|
|
};
|
|
|
|
const struct dpll_params dpll_ddr = {
|
|
/* M N M2 M3 M4 M5 M6 */
|
|
303, (V_OSCK/1000000) - 1, 1, -1, -1, -1, -1};
|
|
|
|
void am33xx_spl_board_init(void)
|
|
{
|
|
struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
|
|
|
|
/* Get the frequency */
|
|
dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev);
|
|
|
|
/* Set CORE Frequencies to OPP100 */
|
|
do_setup_dpll(&dpll_core_regs, &dpll_core_opp100);
|
|
|
|
/* Set MPU Frequency to what we detected now that voltages are set */
|
|
do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100);
|
|
}
|
|
|
|
const struct dpll_params *get_dpll_ddr_params(void)
|
|
{
|
|
return &dpll_ddr;
|
|
}
|
|
|
|
static void probe_sdram_size(long size)
|
|
{
|
|
switch (size) {
|
|
case SZ_512M:
|
|
ddr3_emif_reg_data.sdram_config = MT41J256MJT125_EMIF_SDCFG;
|
|
break;
|
|
case SZ_256M:
|
|
ddr3_emif_reg_data.sdram_config = MT41J128MJT125_EMIF_SDCFG;
|
|
break;
|
|
case SZ_128M:
|
|
ddr3_emif_reg_data.sdram_config = MT41J64MJT125_EMIF_SDCFG;
|
|
break;
|
|
default:
|
|
puts("Failed configuring DRAM, resetting...\n\n");
|
|
reset_cpu();
|
|
}
|
|
debug("%s: setting DRAM size to %ldM\n", __func__, size >> 20);
|
|
config_ddr(303, &ioregs, &ddr3_data,
|
|
&ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0);
|
|
}
|
|
|
|
void sdram_init(void)
|
|
{
|
|
long size = SZ_1G;
|
|
|
|
do {
|
|
size = size / 2;
|
|
probe_sdram_size(size);
|
|
} while (get_ram_size((void *)CONFIG_SYS_SDRAM_BASE, size) < size);
|
|
|
|
return;
|
|
}
|