u-boot/arch/arm/include/asm/arch-omap3
Lokesh Vutla 702395073f ARM: OMAP3+: Detect reset type
Certain modules are not affected by means of
a warm reset and need not be configured again.
Adding an API to detect the reset reason warm/cold.

This will be used to skip the module configurations
that are retained across a warm reset.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: R Sricharan <r.sricharan@ti.com>
2012-07-07 14:07:34 +02:00
..
am35x_def.h AM35xx: add EMAC support 2011-12-06 23:59:36 +01:00
clocks.h OMAP3: Add support for DPLL5 (usbhost) 2011-04-27 19:38:09 +02:00
clocks_omap3.h AM3517: Changed default clock rate for AM3517 2012-02-12 10:11:31 +01:00
cpu.h ARM: OMAP3+: Detect reset type 2012-07-07 14:07:34 +02:00
dma.h omap3: Add interface for omap3 DMA 2011-10-27 21:56:34 +02:00
dss.h omap3_dss: cosmetic changes 2012-05-25 15:35:25 +02:00
ehci.h ehci-omap: Clean up added ehci-omap.c 2012-02-12 10:11:31 +01:00
emac_defs.h AM35xx: add EMAC support 2011-12-06 23:59:36 +01:00
emif4.h AM35x: Add support for EMIF4 2010-06-08 10:07:19 -05:00
gpio.h omap: fix gpio related build breaks 2011-09-04 11:33:36 +02:00
i2c.h ARMV7: Modify i2c driver for more reliable operation on OMAP4 2010-08-05 10:11:24 -04:00
mem.h ARMV7: Fix duplicate use of "b" parameter in ACTIM_CTRLA definition 2012-02-12 10:11:32 +01:00
mmc_host_def.h ARM:OMAP+:MMC: Add parameters to MMC init 2012-05-15 08:31:22 +02:00
mux.h OMAP3: pandora: pin mux updates for DM3730 board variant 2012-05-15 08:31:27 +02:00
omap3-regs.h ARMV7: OMAP3: Add GPMC_CONFIGx register value definitions 2011-04-27 19:38:09 +02:00
omap3.h start.S: remove omap3 specific code from start.S 2011-12-06 23:59:34 +01:00
omap_gpmc.h OMAP3: Overo: Update GPMC timing for ethernet chip 2011-09-30 22:00:53 +02:00
sys_proto.h ARM: OMAP3+: Detect reset type 2012-07-07 14:07:34 +02:00