Alison Wang 7df50fd323 arm: ls102xa: Update snoop settings for CCI-400 ... CAAM is connected to CCI-400 S0 slave interface. Disable snooping for S0 will cause CAAM self test failure. This patch is to enable snooping for S0 slave interface. These CCI-400 operations are moved to board_early_init_f() to be initialized earlier. For S4 slave interface, issuing of snoop requests and DVM message requests are enabled. Signed-off-by: Alison Wang <alison.wang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>		2015-01-23 22:29:14 -06:00
..
clock.h	arm: ls102xa: Add Freescale LS102xA SoC support	2014-09-08 10:30:32 -07:00
config.h	arm/ls1021a: Add workaround for DDR erratum A008378	2015-01-23 22:29:13 -06:00
fsl_serdes.h	arm: ls102xa: Add Freescale LS102xA SoC support	2014-09-08 10:30:32 -07:00
gpio.h	arm: ls102xa: Add dummy gpio.h to enable CONFIG_OF_CONTROL	2015-01-23 22:29:14 -06:00
immap_ls102xa.h	arm: ls102xa: Update snoop settings for CCI-400	2015-01-23 22:29:14 -06:00
imx-regs.h	arm: ls102xa: Add Freescale LS102xA SoC support	2014-09-08 10:30:32 -07:00
ls102xa_stream_id.h	ARM: ls102xa: Setting device's stream id for SMMUs.	2014-12-11 09:42:22 -08:00
ns_access.h	ARM: ls102xa: allow all the peripheral access permission as R/W.	2014-12-11 09:42:12 -08:00
spl.h	arm: ls102xa: Add SD boot support for LS1021AQDS board	2014-12-11 09:39:22 -08:00