mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-27 15:12:21 +00:00
7f5ea25062
Add I2C controller support for Cortina Access CAxxxx SoCs Signed-off-by: Arthur Li <arthur.li@cortina-access.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com> CC: Heiko Schocher <hs@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de> hs: fixed build error, add include log.h
347 lines
7.4 KiB
C
347 lines
7.4 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2020
|
|
* Arthur Li, Cortina Access, arthur.li@cortina-access.com.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <i2c.h>
|
|
#include <log.h>
|
|
#include <asm/io.h>
|
|
#include <dm.h>
|
|
#include <mapmem.h>
|
|
#include "i2c-cortina.h"
|
|
|
|
static void set_speed(struct i2c_regs *regs, int i2c_spd)
|
|
{
|
|
union ca_biw_cfg i2c_cfg;
|
|
|
|
i2c_cfg.wrd = readl(®s->i2c_cfg);
|
|
i2c_cfg.bf.core_en = 0;
|
|
writel(i2c_cfg.wrd, ®s->i2c_cfg);
|
|
|
|
switch (i2c_spd) {
|
|
case IC_SPEED_MODE_FAST_PLUS:
|
|
i2c_cfg.bf.prer = CORTINA_PER_IO_FREQ /
|
|
(5 * I2C_SPEED_FAST_PLUS_RATE) - 1;
|
|
break;
|
|
|
|
case IC_SPEED_MODE_STANDARD:
|
|
i2c_cfg.bf.prer = CORTINA_PER_IO_FREQ /
|
|
(5 * I2C_SPEED_STANDARD_RATE) - 1;
|
|
break;
|
|
|
|
case IC_SPEED_MODE_FAST:
|
|
default:
|
|
i2c_cfg.bf.prer = CORTINA_PER_IO_FREQ /
|
|
(5 * I2C_SPEED_FAST_RATE) - 1;
|
|
break;
|
|
}
|
|
|
|
i2c_cfg.bf.core_en = 1;
|
|
writel(i2c_cfg.wrd, ®s->i2c_cfg);
|
|
}
|
|
|
|
static int ca_i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
|
|
{
|
|
struct ca_i2c *priv = dev_get_priv(bus);
|
|
int i2c_spd;
|
|
|
|
if (speed >= I2C_SPEED_FAST_PLUS_RATE) {
|
|
i2c_spd = IC_SPEED_MODE_FAST_PLUS;
|
|
priv->speed = I2C_SPEED_FAST_PLUS_RATE;
|
|
} else if (speed >= I2C_SPEED_FAST_RATE) {
|
|
i2c_spd = IC_SPEED_MODE_FAST;
|
|
priv->speed = I2C_SPEED_FAST_RATE;
|
|
} else {
|
|
i2c_spd = IC_SPEED_MODE_STANDARD;
|
|
priv->speed = I2C_SPEED_STANDARD_RATE;
|
|
}
|
|
|
|
set_speed(priv->regs, i2c_spd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ca_i2c_get_bus_speed(struct udevice *bus)
|
|
{
|
|
struct ca_i2c *priv = dev_get_priv(bus);
|
|
|
|
return priv->speed;
|
|
}
|
|
|
|
static void ca_i2c_init(struct i2c_regs *regs)
|
|
{
|
|
union ca_biw_cfg i2c_cfg;
|
|
|
|
i2c_cfg.wrd = readl(®s->i2c_cfg);
|
|
i2c_cfg.bf.core_en = 0;
|
|
i2c_cfg.bf.biw_soft_reset = 1;
|
|
writel(i2c_cfg.wrd, ®s->i2c_cfg);
|
|
mdelay(10);
|
|
i2c_cfg.bf.biw_soft_reset = 0;
|
|
writel(i2c_cfg.wrd, ®s->i2c_cfg);
|
|
|
|
set_speed(regs, IC_SPEED_MODE_STANDARD);
|
|
|
|
i2c_cfg.wrd = readl(®s->i2c_cfg);
|
|
i2c_cfg.bf.core_en = 1;
|
|
writel(i2c_cfg.wrd, ®s->i2c_cfg);
|
|
}
|
|
|
|
static int i2c_wait_complete(struct i2c_regs *regs)
|
|
{
|
|
union ca_biw_ctrl i2c_ctrl;
|
|
unsigned long start_time_bb = get_timer(0);
|
|
|
|
i2c_ctrl.wrd = readl(®s->i2c_ctrl);
|
|
|
|
while (i2c_ctrl.bf.biwdone == 0) {
|
|
i2c_ctrl.wrd = readl(®s->i2c_ctrl);
|
|
|
|
if (get_timer(start_time_bb) >
|
|
(unsigned long)(I2C_BYTE_TO_BB)) {
|
|
printf("%s not done!!!\n", __func__);
|
|
return -ETIMEDOUT;
|
|
}
|
|
}
|
|
|
|
/* Clear done bit */
|
|
writel(i2c_ctrl.wrd, ®s->i2c_ctrl);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void i2c_setaddress(struct i2c_regs *regs, unsigned int i2c_addr,
|
|
int write_read)
|
|
{
|
|
writel(i2c_addr | write_read, ®s->i2c_txr);
|
|
|
|
writel(BIW_CTRL_START | BIW_CTRL_WRITE,
|
|
®s->i2c_ctrl);
|
|
|
|
i2c_wait_complete(regs);
|
|
}
|
|
|
|
static int i2c_wait_for_bus_busy(struct i2c_regs *regs)
|
|
{
|
|
union ca_biw_ack i2c_ack;
|
|
unsigned long start_time_bb = get_timer(0);
|
|
|
|
i2c_ack.wrd = readl(®s->i2c_ack);
|
|
|
|
while (i2c_ack.bf.biw_busy) {
|
|
i2c_ack.wrd = readl(®s->i2c_ack);
|
|
|
|
if (get_timer(start_time_bb) >
|
|
(unsigned long)(I2C_BYTE_TO_BB)) {
|
|
printf("%s: timeout!\n", __func__);
|
|
return -ETIMEDOUT;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i2c_xfer_init(struct i2c_regs *regs, uint8_t chip, uint addr,
|
|
int alen, int write_read)
|
|
{
|
|
int addr_len = alen;
|
|
|
|
if (i2c_wait_for_bus_busy(regs))
|
|
return 1;
|
|
|
|
/* First cycle must write addr + offset */
|
|
chip = ((chip & 0x7F) << 1);
|
|
if (alen == 0 && write_read == I2C_CMD_RD)
|
|
i2c_setaddress(regs, chip, I2C_CMD_RD);
|
|
else
|
|
i2c_setaddress(regs, chip, I2C_CMD_WT);
|
|
|
|
while (alen) {
|
|
alen--;
|
|
writel(addr, ®s->i2c_txr);
|
|
if (write_read == I2C_CMD_RD)
|
|
writel(BIW_CTRL_WRITE | BIW_CTRL_STOP,
|
|
®s->i2c_ctrl);
|
|
else
|
|
writel(BIW_CTRL_WRITE, ®s->i2c_ctrl);
|
|
i2c_wait_complete(regs);
|
|
}
|
|
|
|
/* Send address again with Read flag if it's read command */
|
|
if (write_read == I2C_CMD_RD && addr_len > 0)
|
|
i2c_setaddress(regs, chip, I2C_CMD_RD);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i2c_xfer_finish(struct i2c_regs *regs)
|
|
{
|
|
/* Dummy read makes bus free */
|
|
writel(BIW_CTRL_READ | BIW_CTRL_STOP, ®s->i2c_ctrl);
|
|
i2c_wait_complete(regs);
|
|
|
|
if (i2c_wait_for_bus_busy(regs)) {
|
|
printf("Timed out waiting for bus\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ca_i2c_read(struct i2c_regs *regs, uint8_t chip, uint addr,
|
|
int alen, uint8_t *buffer, int len)
|
|
{
|
|
unsigned long start_time_rx;
|
|
int rc = 0;
|
|
|
|
rc = i2c_xfer_init(regs, chip, addr, alen, I2C_CMD_RD);
|
|
if (rc)
|
|
return rc;
|
|
|
|
start_time_rx = get_timer(0);
|
|
while (len) {
|
|
/* ACK_IN is ack value to send during read.
|
|
* ack high only on the very last byte!
|
|
*/
|
|
if (len == 1)
|
|
writel(BIW_CTRL_READ | BIW_CTRL_ACK_IN | BIW_CTRL_STOP,
|
|
®s->i2c_ctrl);
|
|
else
|
|
writel(BIW_CTRL_READ, ®s->i2c_ctrl);
|
|
|
|
rc = i2c_wait_complete(regs);
|
|
udelay(1);
|
|
|
|
if (rc == 0) {
|
|
*buffer++ =
|
|
(uchar) readl(®s->i2c_rxr);
|
|
len--;
|
|
start_time_rx = get_timer(0);
|
|
|
|
} else if (get_timer(start_time_rx) > I2C_BYTE_TO) {
|
|
return -ETIMEDOUT;
|
|
}
|
|
}
|
|
i2c_xfer_finish(regs);
|
|
return rc;
|
|
}
|
|
|
|
static int ca_i2c_write(struct i2c_regs *regs, uint8_t chip, uint addr,
|
|
int alen, uint8_t *buffer, int len)
|
|
{
|
|
int rc, nb = len;
|
|
unsigned long start_time_tx;
|
|
|
|
rc = i2c_xfer_init(regs, chip, addr, alen, I2C_CMD_WT);
|
|
if (rc)
|
|
return rc;
|
|
|
|
start_time_tx = get_timer(0);
|
|
while (len) {
|
|
writel(*buffer, ®s->i2c_txr);
|
|
if (len == 1)
|
|
writel(BIW_CTRL_WRITE | BIW_CTRL_STOP,
|
|
®s->i2c_ctrl);
|
|
else
|
|
writel(BIW_CTRL_WRITE, ®s->i2c_ctrl);
|
|
|
|
rc = i2c_wait_complete(regs);
|
|
|
|
if (rc == 0) {
|
|
len--;
|
|
buffer++;
|
|
start_time_tx = get_timer(0);
|
|
} else if (get_timer(start_time_tx) > (nb * I2C_BYTE_TO)) {
|
|
return -ETIMEDOUT;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ca_i2c_probe_chip(struct udevice *bus, uint chip_addr,
|
|
uint chip_flags)
|
|
{
|
|
struct ca_i2c *priv = dev_get_priv(bus);
|
|
int ret;
|
|
u32 tmp;
|
|
|
|
/* Try to read the first location of the chip */
|
|
ret = ca_i2c_read(priv->regs, chip_addr, 0, 1, (uchar *)&tmp, 1);
|
|
if (ret)
|
|
ca_i2c_init(priv->regs);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ca_i2c_xfer(struct udevice *bus, struct i2c_msg *msg, int nmsgs)
|
|
{
|
|
struct ca_i2c *priv = dev_get_priv(bus);
|
|
int ret;
|
|
|
|
debug("i2c_xfer: %d messages\n", nmsgs);
|
|
for (; nmsgs > 0; nmsgs--, msg++) {
|
|
debug("i2c_xfer: chip=0x%x, len=0x%x\n", msg->addr, msg->len);
|
|
if (msg->flags & I2C_M_RD)
|
|
ret = ca_i2c_read(priv->regs, msg->addr, 0, 0,
|
|
msg->buf, msg->len);
|
|
else
|
|
ret = ca_i2c_write(priv->regs, msg->addr, 0, 0,
|
|
msg->buf, msg->len);
|
|
|
|
if (ret) {
|
|
printf("i2c_xfer: %s error\n",
|
|
msg->flags & I2C_M_RD ? "read" : "write");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_i2c_ops ca_i2c_ops = {
|
|
.xfer = ca_i2c_xfer,
|
|
.probe_chip = ca_i2c_probe_chip,
|
|
.set_bus_speed = ca_i2c_set_bus_speed,
|
|
.get_bus_speed = ca_i2c_get_bus_speed,
|
|
};
|
|
|
|
static const struct udevice_id ca_i2c_ids[] = {
|
|
{ .compatible = "cortina,ca-i2c", },
|
|
{ }
|
|
};
|
|
|
|
static int ca_i2c_probe(struct udevice *bus)
|
|
{
|
|
struct ca_i2c *priv = dev_get_priv(bus);
|
|
|
|
ca_i2c_init(priv->regs);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ca_i2c_ofdata_to_platdata(struct udevice *bus)
|
|
{
|
|
struct ca_i2c *priv = dev_get_priv(bus);
|
|
|
|
priv->regs = map_sysmem(dev_read_addr(bus), sizeof(struct i2c_regs));
|
|
if (!priv->regs) {
|
|
printf("I2C: base address is invalid\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
U_BOOT_DRIVER(i2c_cortina) = {
|
|
.name = "i2c_cortina",
|
|
.id = UCLASS_I2C,
|
|
.of_match = ca_i2c_ids,
|
|
.ofdata_to_platdata = ca_i2c_ofdata_to_platdata,
|
|
.probe = ca_i2c_probe,
|
|
.priv_auto_alloc_size = sizeof(struct ca_i2c),
|
|
.ops = &ca_i2c_ops,
|
|
.flags = DM_FLAG_PRE_RELOC,
|
|
};
|