mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-28 07:31:15 +00:00
91cd41ecda
Remove the malformed multiline string and fix the checkpatch warning. Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
273 lines
6.8 KiB
C
273 lines
6.8 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2022 Kontron Electronics GmbH
|
|
*/
|
|
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/mx6-pins.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/arch/crm_regs.h>
|
|
#include <asm/mach-imx/iomux-v3.h>
|
|
#include <asm/sections.h>
|
|
#include <init.h>
|
|
#include <spl.h>
|
|
#include <fsl_esdhc_imx.h>
|
|
#include <mmc.h>
|
|
|
|
#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \
|
|
PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
|
|
|
|
#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
|
|
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
|
|
PAD_CTL_SRE_FAST | PAD_CTL_HYS)
|
|
|
|
#define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
|
|
PAD_CTL_PUS_22K_UP | PAD_CTL_SPEED_LOW | \
|
|
PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
|
|
|
|
#define GPIO_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
|
|
PAD_CTL_PUS_100K_DOWN | PAD_CTL_SPEED_LOW | \
|
|
PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
|
|
|
|
static const iomux_v3_cfg_t ecspi2_pads[] = {
|
|
MX6_PAD_CSI0_DAT10__ECSPI2_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
|
|
MX6_PAD_CSI0_DAT9__ECSPI2_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL),
|
|
MX6_PAD_CSI0_DAT8__ECSPI2_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
|
|
MX6_PAD_CSI0_DAT11__GPIO5_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
};
|
|
|
|
static const iomux_v3_cfg_t uart2_pads[] = {
|
|
MX6_PAD_SD4_DAT7__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
MX6_PAD_SD4_DAT4__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
};
|
|
|
|
static const iomux_v3_cfg_t usdhc3_pads[] = {
|
|
MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
|
|
/* CD */
|
|
MX6_PAD_GPIO_4__GPIO1_IO04 | MUX_PAD_CTRL(GPIO_PAD_CTRL),
|
|
};
|
|
|
|
#define USDHC3_CD_GPIO IMX_GPIO_NR(1, 4)
|
|
#define SPI2_CS_GPIO IMX_GPIO_NR(5, 29)
|
|
|
|
static struct fsl_esdhc_cfg usdhc_cfg[1] = {
|
|
{USDHC3_BASE_ADDR, 0, 4},
|
|
};
|
|
|
|
int board_mmc_getcd(struct mmc *mmc)
|
|
{
|
|
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
|
|
int ret = 0;
|
|
|
|
switch (cfg->esdhc_base) {
|
|
case USDHC3_BASE_ADDR:
|
|
ret = !gpio_get_value(USDHC3_CD_GPIO);
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
int board_mmc_init(struct bd_info *bis)
|
|
{
|
|
int i, ret;
|
|
|
|
/*
|
|
* According to the board_mmc_init() the following map is done:
|
|
* (U-boot device node) (Physical Port)
|
|
* mmc0 USDHC1
|
|
* mmc1 USDHC2
|
|
*/
|
|
for (i = 0; i < CFG_SYS_FSL_USDHC_NUM; i++) {
|
|
switch (i) {
|
|
case 0:
|
|
imx_iomux_v3_setup_multiple_pads(usdhc3_pads,
|
|
ARRAY_SIZE(usdhc3_pads));
|
|
gpio_direction_input(USDHC3_CD_GPIO);
|
|
usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
|
|
break;
|
|
default:
|
|
printf("Warning: you configured more USDHC controllers (%d) than supported by the board\n",
|
|
i + 1);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
|
|
if (ret) {
|
|
printf("Warning: failed to initialize mmc dev %d\n", i);
|
|
return ret;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void ccgr_init(void)
|
|
{
|
|
struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
|
|
|
|
writel(0x00C03F3F, &ccm->CCGR0);
|
|
writel(0x0030FC03, &ccm->CCGR1);
|
|
writel(0x0FFFC000, &ccm->CCGR2);
|
|
writel(0x3FF00000, &ccm->CCGR3);
|
|
writel(0x00FFF300, &ccm->CCGR4);
|
|
writel(0x0F0000C3, &ccm->CCGR5);
|
|
writel(0x000003FF, &ccm->CCGR6);
|
|
}
|
|
|
|
static int mx6ssielaff_dcd_table[] = {
|
|
0x020e0774, 0x000C0000,
|
|
0x020e0754, 0x00000000,
|
|
0x020e04ac, 0x00000030,
|
|
0x020e04b0, 0x00000030,
|
|
0x020e0464, 0x00000030,
|
|
0x020e0490, 0x00000030,
|
|
0x020e074c, 0x00000030,
|
|
0x020e0494, 0x00000030,
|
|
0x020e04a0, 0x00000000,
|
|
0x020e04b4, 0x00000030,
|
|
0x020e04b8, 0x00000030,
|
|
0x020e076c, 0x00000030,
|
|
0x020e0750, 0x00020000,
|
|
0x020e04bc, 0x00000030,
|
|
0x020e04c0, 0x00000030,
|
|
0x020e04c4, 0x00000030,
|
|
0x020e04c8, 0x00000030,
|
|
0x020e0760, 0x00020000,
|
|
0x020e0764, 0x00000030,
|
|
0x020e0770, 0x00000030,
|
|
0x020e0778, 0x00000030,
|
|
0x020e077c, 0x00000030,
|
|
0x020e0470, 0x00000030,
|
|
0x020e0474, 0x00000030,
|
|
0x020e0478, 0x00000030,
|
|
0x020e047c, 0x00000030,
|
|
0x021b001c, 0x00008000,
|
|
0x021b0800, 0xA1390003,
|
|
0x021b080c, 0x00350035,
|
|
0x021b0810, 0x002A0032,
|
|
0x021b083c, 0x02340234,
|
|
0x021b0840, 0x02200220,
|
|
0x021b0848, 0x4650504E,
|
|
0x021b0850, 0x3A342E34,
|
|
0x021b081c, 0x33333333,
|
|
0x021b0820, 0x33333333,
|
|
0x021b0824, 0x33333333,
|
|
0x021b0828, 0x33333333,
|
|
0x021b08b8, 0x00000800,
|
|
0x021b0004, 0x0002002D,
|
|
0x021b0008, 0x00333040,
|
|
0x021b000c, 0x676B52F3,
|
|
0x021b0010, 0xB66D8B63,
|
|
0x021b0014, 0x01FF00DB,
|
|
0x021b0018, 0x00011740,
|
|
0x021b001c, 0x00008000,
|
|
0x021b002c, 0x000026D2,
|
|
0x021b0030, 0x006B1023,
|
|
0x021b0040, 0x00000027,
|
|
0x021b0000, 0x84190000,
|
|
0x021b001c, 0x02008032,
|
|
0x021b001c, 0x00008033,
|
|
0x021b001c, 0x00048031,
|
|
0x021b001c, 0x15208030,
|
|
0x021b001c, 0x04008040,
|
|
0x021b0020, 0x00007800,
|
|
0x021b0818, 0x00022227,
|
|
0x021b0004, 0x0002556D,
|
|
0x021b0404, 0x00011006,
|
|
0x021b001c, 0x00000000,
|
|
0x020c4068, 0x00C03F3F,
|
|
0x020c406c, 0x0030FC03,
|
|
0x020c4070, 0x0FFFC000,
|
|
0x020c4074, 0x3FF00000,
|
|
0x020c4078, 0xFFFFF300,
|
|
0x020c407c, 0x0F0000C3,
|
|
0x020c4080, 0x000003FF,
|
|
0x020e0010, 0xF00000CF,
|
|
0x020e0018, 0x007F007F,
|
|
0x020e001c, 0x007F007F,
|
|
};
|
|
|
|
static void ddr_init(int *table, int size)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < size / 2 ; i++)
|
|
writel(table[2 * i + 1], table[2 * i]);
|
|
}
|
|
|
|
static void spl_dram_init(void)
|
|
{
|
|
ddr_init(mx6ssielaff_dcd_table, ARRAY_SIZE(mx6ssielaff_dcd_table));
|
|
}
|
|
|
|
int board_spi_cs_gpio(unsigned int bus, unsigned int cs)
|
|
{
|
|
return (bus == CONFIG_SF_DEFAULT_BUS && cs == CONFIG_SF_DEFAULT_CS)
|
|
? SPI2_CS_GPIO : -1;
|
|
}
|
|
|
|
static void setup_spi(void)
|
|
{
|
|
imx_iomux_v3_setup_multiple_pads(ecspi2_pads, ARRAY_SIZE(ecspi2_pads));
|
|
gpio_request(SPI2_CS_GPIO, "spi2_cs0");
|
|
gpio_direction_output(SPI2_CS_GPIO, 1);
|
|
enable_spi_clk(true, 1);
|
|
}
|
|
|
|
void board_init_f(ulong dummy)
|
|
{
|
|
/* setup AIPS and disable watchdog */
|
|
arch_cpu_init();
|
|
|
|
ccgr_init();
|
|
gpr_init();
|
|
|
|
/* IOMUX UART */
|
|
imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads));
|
|
|
|
/* setup GP timer */
|
|
timer_init();
|
|
|
|
/* UART clocks enabled and gd valid - init serial console */
|
|
preloader_console_init();
|
|
|
|
/* DDR initialization */
|
|
spl_dram_init();
|
|
|
|
/* Clear the BSS. */
|
|
memset(__bss_start, 0, __bss_end - __bss_start);
|
|
|
|
/* SPI */
|
|
setup_spi();
|
|
|
|
/* load/boot image from boot device */
|
|
board_init_r(NULL, 0);
|
|
}
|
|
|
|
void board_boot_order(u32 *spl_boot_list)
|
|
{
|
|
u32 bootdev = spl_boot_device();
|
|
|
|
/*
|
|
* The default boot fuse settings use the SD card (MMC1) as primary
|
|
* boot device, but allow SPI NOR as a fallback boot device.
|
|
* We can't detect the fallback case and spl_boot_device() will return
|
|
* BOOT_DEVICE_MMC1 despite the actual boot device being SPI NOR.
|
|
* Therefore we try to load U-Boot proper vom SPI NOR after loading
|
|
* from MMC has failed.
|
|
*/
|
|
spl_boot_list[0] = bootdev;
|
|
|
|
switch (bootdev) {
|
|
case BOOT_DEVICE_MMC1:
|
|
case BOOT_DEVICE_MMC2:
|
|
spl_boot_list[1] = BOOT_DEVICE_SPI;
|
|
break;
|
|
}
|
|
}
|