u-boot/arch/arm/mach-omap2/omap3/Kconfig
Bartosz Golaszewski d7cc0e4d79 mcx: remove board
This board still doesn't select CONFIG_DM and seems to be umaintained.
As it makes progress on modernizing several DaVinci drivers more
difficult and the maintainer has not expressed interest in updating
it, this patch proposes to remove it.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-05-28 13:58:06 -04:00

192 lines
3.5 KiB
Text

if OMAP34XX
# We only enable the clocks for the GPIO banks that a given board requies.
config OMAP3_GPIO_2
bool
default y if CMD_GPIO
config OMAP3_GPIO_3
bool
default y if CMD_GPIO
config OMAP3_GPIO_4
bool
default y if CMD_GPIO
config OMAP3_GPIO_5
bool
default y if CMD_GPIO
config OMAP3_GPIO_6
bool
default y if CMD_GPIO
choice
prompt "OMAP3 board select"
optional
config TARGET_AM3517_EVM
bool "AM3517 EVM"
select DM
select DM_GPIO
select DM_I2C
select DM_MMC
select DM_SERIAL
imply CMD_DM
config TARGET_OMAP3_BEAGLE
bool "TI OMAP3 BeagleBoard"
select DM
select DM_GPIO
select DM_SERIAL
select OMAP3_GPIO_5
select OMAP3_GPIO_6
imply CMD_DM
config TARGET_CM_T35
bool "CompuLab CM-T3530 and CM-T3730 boards"
select OMAP3_GPIO_2
select OMAP3_GPIO_5
select OMAP3_GPIO_6 if LED_STATUS
config TARGET_DEVKIT8000
bool "TimLL OMAP3 Devkit8000"
select DM
select DM_GPIO
select DM_SERIAL
imply CMD_DM
config TARGET_OMAP3_EVM
bool "TI OMAP3 EVM"
select DM
select DM_GPIO
select DM_SERIAL
select OMAP3_GPIO_3
imply CMD_DM
config TARGET_OMAP3_IGEP00X0
bool "IGEP"
select DM
select DM_GPIO
select DM_SERIAL
select OMAP3_GPIO_3
select OMAP3_GPIO_5
select OMAP3_GPIO_6
imply CMD_DM
config TARGET_OMAP3_OVERO
bool "OMAP35xx Gumstix Overo"
select DM
select DM_GPIO
select DM_SERIAL
select OMAP3_GPIO_2
select OMAP3_GPIO_3
select OMAP3_GPIO_4
select OMAP3_GPIO_5
select OMAP3_GPIO_6
imply CMD_DM
config TARGET_OMAP3_ZOOM1
bool "TI Zoom1"
select DM
select DM_GPIO
select DM_SERIAL
imply CMD_DM
config TARGET_AM3517_CRANE
bool "am3517_crane"
config TARGET_OMAP3_PANDORA
bool "OMAP3 Pandora"
select OMAP3_GPIO_4
select OMAP3_GPIO_6
config TARGET_TRICORDER
bool "Tricorder"
select OMAP3_GPIO_2
config TARGET_OMAP3_LOGIC
bool "OMAP3 Logic"
select BOARD_LATE_INIT
select DM
select DM_GPIO
select DM_SERIAL
select OMAP3_GPIO_3
select OMAP3_GPIO_4
select OMAP3_GPIO_6
imply CMD_DM
config TARGET_NOKIA_RX51
bool "Nokia RX51"
config TARGET_TAO3530
bool "TAO3530"
select OMAP3_GPIO_2
select OMAP3_GPIO_3
select OMAP3_GPIO_4
select OMAP3_GPIO_5
select OMAP3_GPIO_6
config TARGET_OMAP3_CAIRO
bool "QUIPOS CAIRO"
select DM
select DM_GPIO
select DM_SERIAL
imply CMD_DM
config TARGET_SNIPER
bool "LG Optimus Black"
select DM
select DM_GPIO
select DM_SERIAL
select OMAP3_GPIO_2
select OMAP3_GPIO_3
select OMAP3_GPIO_4
select OMAP3_GPIO_5
select OMAP3_GPIO_6
imply CMD_DM
endchoice
choice
prompt "Memory Controller"
default SDRC
config SDRC
bool "SDRC controller"
help
The default memory controller on most OMAP3 boards is SDRC.
config EMIF4
bool "EMIF4 controller"
help
Enable this on boards like AM3517 which use EMIF4 controller
endchoice
config SPL_OMAP3_ID_NAND
bool "Support OMAP3-specific ID and MFR function"
help
Support for an OMAP3-specific set of functions to return the
ID and MFR of the first attached NAND chip, if present.
config SYS_SOC
default "omap3"
source "board/logicpd/am3517evm/Kconfig"
source "board/ti/beagle/Kconfig"
source "board/compulab/cm_t35/Kconfig"
source "board/timll/devkit8000/Kconfig"
source "board/ti/evm/Kconfig"
source "board/isee/igep00x0/Kconfig"
source "board/overo/Kconfig"
source "board/logicpd/zoom1/Kconfig"
source "board/ti/am3517crane/Kconfig"
source "board/pandora/Kconfig"
source "board/corscience/tricorder/Kconfig"
source "board/logicpd/omap3som/Kconfig"
source "board/nokia/rx51/Kconfig"
source "board/technexion/tao3530/Kconfig"
source "board/quipos/cairo/Kconfig"
source "board/lg/sniper/Kconfig"
endif